The tannery industry is renowned for the huge amount of toxic solid and liquid waste generated from the cleaning, fleshing, splitting, tanning, shaving and buffing of raw materials. Biomass briquettes are a proven way of generating energy from waste. This study investigates the development and characterization of biomass briquettes from tannery solid wastes (TSWs). TSWs, which comprise hair, flesh, chrome shavings and buffing dust, were collected from a tannery in Kano, Nigeria, to formulate and characterize six briquettes. Scanning electron microscopy and proximate analysis were carried out on the samples. The six briquettes, comprising varying ratios of hair, flesh, chrome shavings and buffing dust, were molded and characterized. Thermal efficiency, durability and compressive strength, among other properties, were determined for the six briquette formulations. The briquettes developed had calorific values between 18.632 and 24.101 MJ/kg. Durability of the briquettes ranged from 98.12% to 99.77%. The energy values were within the range of 17.462–24.101 MJ/kg, which was comparable to other fuel sources such as sub-bituminous coal (20.000–24.730 MJ/kg). This study shows that TSWs can be used for fuel briquette production, which is a source of sustainable energy generation. It is environmentally friendly, cost effective and affordable compared to fossil fuel.

Inflammation has been implicated in many disorders, including cancer and available therapies elicit adverse effects. Plants of the family Rubiaceae have shown potency against inflammation. The anti-inflammatory and anti-oxidant potential of Feretia apodanthera was investigated in this study to evaluate its effectiveness. The phytochemical, antioxidant and anti-inflammatory potential of root bark (n-Hexane, diethyl ether, ethanol and aqueous) extracts of Feretia apodanthera was investigated in this study. The extracts were subjected to various chemical tests for phytochemical constituents; their antioxidant activity was determined using in-vitro DPPH radical scavenging activity assay and their anti-inflammatory activity was determined using carrageenan induced paw oedema model. FTIR and GCMS analysis was done to determine the compounds present. Phytochemical screening of extracts revealed the presence of unsaturated steroids, triterpenes, cardiac glycosides, tannins, saponin and alkaloids. Vitamin C had a median inhibitory concentration (IC50) of 0.038 mg/ml which was lower than IC50 of all the extracts. Of all the extracts, ethanol extract had the lowest IC50 (0.044 mg/ml) which is comparable to vitamin C. Anti-inflammatory studies showed that the inflammation inhibition potential of 400 mg/kg body weight of all the extracts was significantly lower (p < 0.05) than the standard ketoprofen (50 mg/kg) at the first three hours but significantly higher (p < 0.05) at the fourth hour. At the fifth hour, the inflammation inhibition potential of diethyl ether, ethanol and aqueous extracts were significantly higher (p < 0.05) than that of the standard. FTIR analysis showed the presence of ketones, amines, alkenes and carboxylic groups. GCMS analysis revealed compounds that are potential anti-inflammatory agents. This study revealed that extracts of Feretia apodanthera possess anti-inflammatory effects against right hind paw oedema of albino rats and can act as an effective antioxidant.

Background: Discharge of large amounts of untreated industrial effluent into water bodies pose significant environmental challenges worldwide. This is due to the limitations of traditional wastewater treatment methods in the treatment of recalcitrant organic pollutants. Fenton processes involves the generation of hydroxyl radicals that are well suited to degrade organics in effluent water. This study focuses on reducing slag generation during Fenton processes and enhancing the reuse of nano-zero-valent iron (NZVI) through the immobilization of NZVI on activated carbon cloth (ACC) through a chitosan (CH) linker with phenol as a model pollutant. Results: Microstructural and spectroscopic techniques were employed to study the materials prepared and 37.5 wt% iron loading was achieved. Phenol degradation of 96.3% at 40 °C at pH of 3.0 with 50 mM H₂O₂ was achieved using ACC-CH-NZVI. Adsorption and degradation studies carried out using ACC-CH-NZVI catalyst revealed that phenol adsorption onto ACC-CH-NZVI fits the Langmuir isotherm model, following the pseudo-second-order kinetic model and first-order reaction kinetics. Thermodynamic studies indicate the non-spontaneous, endothermic and irreversible nature of the removal process. Comparing ACC-CH-NZVI with ACC and ACC-CH, phenol removal using ACC drops from 87.8 to 39%, while using ACC-CH, the removal efficiency drops from 73 to 20.9% and using ACC-CH-NZVI, phenol removal drops from 96.3 to about 70% and total organic carbon removal drops from 79 to about 60% with minimal iron leaching, highlighting the superior performance of ACC-CH-ZVI and the role of NZVI in enhancing phenol removal. Conclusions: The catalyst demonstrated good stability for phenol degradation to about 70% phenol removal from simulated wastewater and 60% TOC removal from industrial wastewater after five treatment cycles with minimal Fe leaching. Graphical