Liquid reconfigurable ferromagnetic materials: Ferromagnetic materials show a permanent magnetic dipole, whereas superparamagnetic ones only show magnetic properties under an applied field. Some materials, like ferrofluids, show liquid-like behavior but do not retain their magnetization in the absence of an applied field. Liu et al. show remnant magnetization of otherwise superparamagnetic magnetite nanoparticles at an oil-water interface of emulsion droplets (see the Perspective by Dreyfus). The permanent magnetization could be controlled by coupling and uncoupling the magnetization of individual nanoparticles, making it possible to “write and erase” shapes of the droplets or to elongate them into cylinders. Science , this issue p. 264 ; see also p. 219

Polymer Film Behavior: An ongoing debate in the understanding of the behavior of thin-film glassy polymers is whether there is nanoconfinement of large molecules or enhanced mobility near a free surface. Chai et al. (p. 994 ; see the Perspective by Chen et al. ) prepared polymer films with a sharp step in the profile by depositing broken film fragments onto a uniform underlay. Atomic force microscopy revealed changes to the overall film profile with time at various temperatures. A transition was observed from localized motions to relaxation of the entire film at a temperature close to that of the bulk glass transition temperature.

Systems comprised of immiscible liquids held in non-equilibrium shapes by the interfacial assembly and jamming of nanoparticle−polymer surfactants have significant potential to advance catalysis, chemical separations, energy storage and conversion. Spatially directing functionality within them and coupling processes in both phases remains a challenge. Here, we exploit nanoclay−polymer surfactant assemblies at an oil−water interface to produce a semi-permeable membrane between the liquids, and from them all-liquid fluidic devices with bespoke properties. Flow channels are fabricated using micropatterned 2D substrates and liquid-in-liquid 3D printing. The anionic walls of the device can be functionalized with cationic small molecules, enzymes, and colloidal nanocrystal catalysts. Multi-step chemical transformations can be conducted within the channels under flow, as can selective mass transport across the liquid−liquid interface for in-line separations. These all-liquid systems become automated using pumps, detectors, and control systems, revealing a latent ability for chemical logic and learning.

Direct observation of nanoparticle adsorption to the water-oil interface captures early attachment and jamming.