Xin Yi Tee

Dr. Xin Yi Tee

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 August 2023 in Pharmaceutics
Verified
Journal Article
Open access
PDF file
PCPui Shan Chow
Pui Shan Chow
RLRon Tau Yee Lim
Ron Tau Yee Lim
FCFebin Cyriac
Febin Cyriac
JSJaymin C Shah
Jaymin C Shah
Abu Zayed Md BadruddozaAbu Zayed Md Badruddoza
Abu Zayed Md Badruddoza
GWGuan Wang
Guan Wang
The manufacturing process for ointments typically involves a series of heating, cooling, and mixing steps. Precise control of the level of mixing through homogenization and the cooling rate, as well as temperature at different stages, is important in delivering ointments with the desired quality attributes, stability, and performance. In this work, we investigated the influence of typical plant processing conditions on the microstructure, stability, and sensorial properties of a model ointment system through a Design of Experiments (DoE) approach. Homogenization speed at the cooling stage after the addition of the solvent (propylene glycol, PG) was found to be the critical processing parameter that affects stability and the rheological and sensorial properties of the ointment. A lower PG addition temperature was also found to be beneficial. The stabilization of the ointment at a lower PG addition temperature was hypothesized to be due to more effective encapsulation by crystallizing mono- and diglycerides at the lower temperature. The in vitro release profiles were found to be not influenced by the processing parameters, suggesting that for the ointment platform studied, processing affects the microstructure, but the effects do not translate into the release profile, a key performance indicator. Our systematic study represents a Quality-by-Design (QbD) approach to the design of a robust manufacturing process for delivering stable ointments with the desired performance attributes and properties.

3 February 2022 in Journal of Rheology
Verified
Journal Article
Closed access
PDF file
FCFebin Cyriac
Febin Cyriac
XTXin Yi Tee
Xin Yi Tee
PCPui Shan Chow
Pui Shan Chow
CMCalum Macbeath
Calum Macbeath
The aim of the work was to identify the physical parameters relevant to different perceptual attributes by comparing a range of commercial skin creams with various compositions. We investigated the possibility of predicting sensory properties using rheological and tribological methods. Rheological evaluations of the skin creams were carried out using continuous shear, creep, creep recovery, rheodestruction and recovery measurements, oscillatory strain sweep measurements [small amplitude oscillatory shear (SAOS) and large amplitude oscillatory shear (LAOS)], and frequency sweep measurements. Friction measurements were performed on the nonbiological skin model to investigate how surface properties are influenced by the application of different topical formulations. Furthermore, the formulations were characterized by a broad range of instrumental texture measurements. In vivo sensory analysis based on the spectrum descriptive analysis method was performed to discriminate the skin creams during pickup, rub out, and after feel. Using principal component analysis meaningful correlation relating rheotribological properties and sensory attributes during the entire process of product application was carried out. Rheological parameters deduced from the nonlinear regime were found to be important parameters affecting the frictional response of skin creams. In addition, friction data were correlated with slipperiness and stickiness—subjective attributes used for the sensory evaluation of after feel. Furthermore, a number of key textural parameters and sensorial data showed good correlation with results obtained from linear and nonlinear rheological measurement, indicating rheological analysis can be sufficiently used as a precise and valid tool for sensorial mapping of topical formulations. Our study further suggests that objective evaluation based on the flow curve, oscillatory strain sweep (SAOS and LAOS), and friction measurements can be used for sensorial screening of large number of prototype formulations, which otherwise may be time consuming and costly using a sensory panel.

6 June 2024 in Pharmaceutics
Verified
Journal Article
Open access
PDF file
PCPui Shan Chow
Pui Shan Chow
RLRon Tau Yee Lim
Ron Tau Yee Lim
FCFebin Cyriac
Febin Cyriac
JSJaymin C Shah
Jaymin C Shah
Abu Zayed Md BadruddozaAbu Zayed Md Badruddoza
Abu Zayed Md Badruddoza
GWGuan Wang
Guan Wang
A classical emulsion formulation based on petrolatum and mineral oil as the internal phase with emulsifier wax as a typical topical emulsion cream was investigated for the effect of process parameters on drug product quality and performance attributes. The Initial Design of Experiment (DoE) suggested that an oil phase above 15%, coupled with less than 10% emulsifying wax, resulted in less stable emulsions. Different processing parameters such as homogenization speed, duration, cooling rate, and final temperature showed minimal influence on properties and failed to improve stability. The final DoE suggested that the optimal emulsion stability was achieved by introducing a holding period midway through the cooling stage after solvent addition. Within the studied holding temperature range (25–35 °C), a higher holding temperature correlated with increased emulsion stability. However, the application of shear during the holding period, using a paddle mixer, adversely affected stability by disrupting the emulsion microstructure. IVRT studies revealed that the release of lidocaine was higher in the most stable emulsion produced at a holding temperature of 35 °C compared to the least stable emulsion produced at a holding temperature of 25 °C. This suggests that a holding temperature of 35 °C improves both the stability and active release performance. It appears that a slightly higher holding temperature, 35 °C, allows a more flexible and stable emulsifying agent film around the droplets facilitating stabilization of the emulsion. This study offers valuable insights into the relationship between process parameters at various stages of manufacture, microstructure, and various quality attributes of emulsion cream systems. The knowledge gained will facilitate improved design and optimization of robust manufacturing processes, ensuring the production of the formulations with the desired critical quality attributes.

4 May 2022 in International Journal of Cosmetic Science
Verified
Journal Article
Closed access
FCFebin Cyriac
Febin Cyriac
XTXin Yi Tee
Xin Yi Tee
PCPui Shan Chow
Pui Shan Chow

20 September 2025 in Pharmaceutics
Verified
Journal Article
Open access
PDF file
RYRuochen Yang
Ruochen Yang
XTXin Yi Tee
Xin Yi Tee
Sendhil PoornacharySendhil Poornachary
Sendhil Poornachary
Elena SimoneElena Simone
Elena Simone
PCPui Shan Chow
Pui Shan Chow
Background/Objectives: Emulsion-based semisolid formulations are important delivery systems for many applications, including pharmaceuticals, cosmetics and food. The manufacturing process for such formulations typically involves a series of heating, cooling, mixing and emulsification steps. Stabilizing agents are usually included in such formulations, as emulsions are intrinsically unstable and are prone to various destabilization mechanisms. Precise control of each processing parameter and the selection of an appropriate stabilizing agent are essential for delivering products with long-term stability and the desired properties. In this study, the effects of emulsification temperature and the selection of the stabilizing agent on key product attributes were investigated to enable improved design and optimization of both the formulation and manufacturing process. Methods: Model emulsion systems containing propylene glycol (PG) as the dispersed phase and mineral oil as the continuous phase were prepared at different emulsification temperatures to cover both pre-crystallization and post-crystallization regimes. Three stabilizing agents, namely mono-and-diglyceride (MDG), neat monoglyceride (MG) and neat diglyceride (DG), were studied. Their crystallization behavior was first examined to determine crystallization temperatures and crystal morphologies. The resulting emulsion samples were then characterized in terms of their microstructure, physical stability and rheological properties. Results: The emulsions prepared under post-crystallization conditions exhibited better physical stability, higher rheological parameters (crossover stress and viscosity) and a more rigid microstructure compared to those formed under pre-crystallization conditions, regardless of the stabilizer used. Rheological properties were found to corelate well with physical stability. In the pre-crystallization regime, poor stability could partially be mitigated by lowering the emulsification temperature. MG was generally more effective than DG in stabilizing the emulsions and led to higher rheological properties, despite both crystallizing into the same polymorph within the system. This difference in performance was attributed to variations in the crystal morphology and spatial distribution within the emulsion. Notably, the MG-stabilized emulsions also displayed a self-hardening effect during storage. Conclusions: The selection of the appropriate stabilizing agents and processing conditions tailored to the specific system is critical for the successful manufacture of emulsion-based semisolid products with an optimized performance.