SiC-reinforced SiC ceramic matrix composites (SiC/SiC CMCs) are considered promising candidates to replace their super alloy counterparts due to higher temperature capabilities and lower densities. However, high-temperature and high-pressure water vapour sourced from the hydrocarbons’ combustion reactions inhibit the potential of SiC/SiC CMCs by leading to rapid surface recession. In order to address this challenge, environmental barrier coatings (EBCs) have been developed. The emphasis of this review is on the materials and processing techniques for the development of EBC systems. In the first part of the review, the characteristics of the SiC/SiC CMCs and the most common EBC materials are summarised. Then, the interrelationship between processing methods, microstructures and the resulting properties is reviewed. Finally, an overview of the future directions is outlined to assist developments in advanced and novel EBCs for next generation gas turbines.
This study has been initiated to form a TiO2 layer having enhanced biological properties on the surface of a CoCr alloy, which is mostly used in manufacturing of orthopaedic implants. As a novel approach, CoCr alloy samples were first coated with titanium and then oxidised in air at 600°C for 60 h. Surface characterisation of the samples were made by structural surveys (scanning electron microscopic examinations, X-ray diffraction analyses), roughness and hardness measurements, bioactivity and wear tests. Results of the experiments have showed that fabrication of TiO2 as the outermost surface layer caused remarkable increment in the wear resistance and the bioactivity of the CoCr alloy.