A distributed formation control scheme of multi-robot systems for bipartite consensus under communication delays is presented in this paper. The bipartite consensus protocol under communication delays is first proposed. Under the bipartite consensus protocol, a necessary and sufficient condition is then presented for achieving bipartite consensus of the multi-agent system without time-delays. For the system with time-delays, a sufficient condition to asymptotically achieve the bipartite consensus is proposed. Furthermore, a universal multi-robot formation control protocol with communication delays is put forward according to the given bipartite consensus protocol. As an example, the bipartite consensus protocol under communication delays is applied to multi-robot formation control. Finally, a number of simulations are proposed to demonstrate the theoretical contributions of this work.
Purpose: This paper aims to provide a theoretical principle for the stability control of robot climbing stairs, autonomously based on human–robot interaction. Through this research, tracked mobile robots with human-robot interaction will be extensively used in rescue in disaster, exploration on planetary, fighting in battle, and searching for survivors in collapsed buildings. Design/methodology/approach: This paper introduces the tracked mobile robot, based on human–robot interaction, and its six moving postures. The dynamic process of climbing stairs is analyzed, and the dynamic model of the robot is proposed. The dynamic stability criterion is derived when the tracked mobile robot contacts the stairs steps in one, two and more points. A further conduction of simulation on the relationship of the traction force and bearing force vs the velocity and acceleration in the three cases was carried out. Findings: This paper explains that the tracked mobile robot, based on human–robot interaction, can stably climb stairs so long as the velocity and acceleration satisfy the dynamic stability criterion as noted above. In addition, the experiment tests the correctness of dynamic stability analysis when the tracked mobile robot contacts the stair steps in one, two or more points. Originality/value: This paper provides the mechanical structure and working principle of the tracked mobile robot based on human–robot interaction and proposes an identification method of dynamic stability criterion when the robot contacts the stairs steps in one, two and more points.
20 October 2021 in Transactions of the Institute of Measurement and Control
This paper considers a multi-robot formation control scheme for high-order bipartite consensus under time-varying delays. First, a third-order bipartite consensus protocol under time-varying delays is presented, and then a high-order bipartite consensus protocol is extended from it. Then, necessary and sufficient conditions for third-order and high-order multi-agent systems without time-delays are given to attain bipartite consensus following the protocols. Communication time-delays are added to the protocols, and the theory of Lyapunov asymptotic stability is used to obtain sufficient conditions for the multi-agent systems with communication delays to ultimately attain a bipartite consensus. Furthermore, the given protocol is employed for the formation control of multi-robot systems, and a formation control scheme for multi-robot systems with time-varying delays is proposed. Finally, a few simulations are implemented to demonstrate the rationality and availability of the method.
Improving the surface quality and controlling the microstructure evolution of difficult-to-cut materials are always challenges in high-speed machining (HSM). In this paper, surface topography, defects and roughness are assessed to characterize the surface features of 7050 aluminum alloy (Al 7050) under HSM conditions characterized by high temperature, strain and strain rate. Based on multi-physical field coupling, the mechanism of microstructure evolution of Al 7050 is investigated in HSM. The results indicate that the surface morphology and roughness of Al7050 during HSM are optimal at fz = 0.025 mm/z, and the formation of surface defects (adherent chips, cavities, microcracks, material compression and tearing) in HSM is mainly affected by thermo-mechanical coupling. Significant differences are observed in the microstructure of different machined subsurfaces by electron backscatter diffraction (EBSD) technology, and high cutting speeds and high feed rates contributed to recrystallization. The crystallographic texture types on machined subsurface are mainly {110} Brass texture, {001} Cube texture, {123} S texture and {124} R texture, and the crystallographic texture type and intensity are significantly affected by multi-physical field coupling. The elastic–plastic deformation and microstructural evolution of Al7050 alloy during the HSM process are mainly influenced by the coupling effects of multiple physical fields (stress–strain field and thermo-mechanical coupling field). This study reveals the internal mechanism of multi-physical field coupling in HSM and provides valuable enlightenment for the control of microstructure evolution of difficult-to-cut materials in HSM.
This study investigated the high-speed cutting performance of 7050 aluminum alloy with prefabricated crystal orientations under dry-cutting conditions. Three specimens with different crystal orientations were prefabricated using pre-deformations of 10, 15, and 20%, and the effects of cutting parameters on cutting force, surface morphology, and tool wear were analyzed. The results showed that the three-dimensional cutting force initially increased and then decreased with the increase in cutting speed. In addition, the three-dimensional cutting force increased with the increase in cutting depth and feed rate. Under the same cutting parameters, the three-dimensional cutting force of 7050 aluminum alloy was in the following order: 20% pre-deformation > 10% pre-deformation > 15% pre-deformation. During high-speed cutting, different degrees of plowing, bulging, and sticky chips appeared on the machined surface, and the surface morphology of the 15% pre-deformed 7050 aluminum alloy was better than that of the other two pre-deformed 7050 aluminum alloys. During the high-speed cutting process, tool wear mainly occurred in the forms of collapse edge, adhesion, flaking, and breakage, and wear mechanisms were usually adhesive, diffusion, and oxidation wears. Under the same cutting parameters, the tool wear of the 15% pre-deformed 7050 aluminum alloy was lighter.
6 December 2024 in Journal of Advanced Manufacturing Systems