Accurate measurement of coal gas permeability helps prevent coal gas safety accidents effectively. To predict permeability more accurately, we propose the IDBO-BPNN coal body gas permeability prediction model. This model combines the Improved Dung Beetle algorithm (IDBO) with the BP neural network (BPNN). First, the Sine chaotic mapping, Osprey optimization algorithm, and adaptive T-distribution dynamic selection strategy are integrated to enhance the DBO algorithm and improve its global search capability. Then, IDBO is utilized to optimize the weights and thresholds in BPNN to enhance its prediction accuracy and mitigate the risk of overfitting to some extent. Secondly, based on the influencing factors of gas permeability, effective stress, gas pressure, temperature, and compressive strength, they are chosen as the coupling indicators. The SPSS 27 software is used to analyze the correlation among the indicators using the Pearson correlation coefficient matrix. Additionally, the Kernel Principal Component Analysis (KPCA) is employed to extract the original data. Then, the original data is divided into principal component data for the model input. The prediction results of the IDBO-BPNN model are compared with those of the PSO-BPNN, PSO-LSSVM, PSO-SVM, MPA-BPNN, WOA-SVM, BES-SVM, and DPO-BPNN models. This comparison assesses the capability of KPCA to enhance the accuracy of model predictions and the performance of the IDBO-BPNN model. Finally, the IDBO-BPNN model is tested using data from a coal mine in Shanxi. The results indicate that the predicted outcome closely aligns with the actual value, confirming the reliability and stability of the model. Therefore, the IDBO-BPNN model is better suited for predicting coal gas permeability in academic research writing.

In order to quickly and accurately predict borehole spontaneous combustion danger and avoid borehole spontaneous combustion fires, a borehole spontaneous combustion prediction model combining the Hunger Games search optimization algorithm (HGS) and Random Forest (RF) algorithm was introduced. The number of trees and the minimum number of leaf nodes in RF were optimized by HGS. Based on the data obtained from the temperature rise experiment of spontaneous combustion characteristics in a Shandong mine laboratory, O₂, CO, C₂H₄, CO/∆O₂ and C₂H₄/C₂H₆ were selected as the input indexes for the prediction of borehole spontaneous combustion, and the spontaneous combustion temperature was selected as the output indexes to train the built model. The prediction performance and accuracy of the model were evaluated using four indexes: the mean absolute error (MAE), mean absolute percentage error (MAPE), root mean square error (RMSE) and coefficient of determination (R2). At the same time, the prediction results of the HGS-RF model were compared with those of the RF model, Sparrow search algorithm (SSA) optimization RF model, particle swarm optimization RF model (PSO) optimization RF model and quantum particle swarm optimization RF model (QPSO) optimization. The results showed that the MAE of the RF, SSA-RF, PSO-RF, QPSO-RF and HGS-RF model samples were 17.541, 15.7752, 12.5903, 6.8594 and 6.6921, respectively. MAPE was 13.81%, 10.9766%, 9.6802%, 4.5731% and 5.1536%, respectively. RMSE values were 21.5646, 15.2017, 17.0091, 11.9879 and 12.1691, respectively. The R2 values were 0.9043, 0.9315, 0.9266, 0.9668, and 0.9717, respectively. At the same time, the reliability of the HGS-RF model was supplemented by taking the test data of the Zhengjia1204 coal mining face as an example. Finally, the model was applied to the prediction of borehole spontaneous combustion in the Jinniu Coal Mine, Shanxi Province. The prediction results show that the HGS-RF model can predict the spontaneous combustion temperature of different boreholes quickly and accurately. The results show that the HGS-RF model is more universal and stable than other models, indicating that the HGS-RF model is more suitable for the prediction of borehole spontaneous combustion.

The limit parameters of coal spontaneous combustion are important indicators for determining the risk of spontaneous combustion in coal seams. By analyzing the limit parameters of coal spontaneous combustion, the dangerous areas of coal spontaneous combustion can be determined, and corresponding measures can be taken to avoid the occurrence of fires. In order to accurately predict the limit parameters of coal spontaneous combustion, the prediction model of coal spontaneous combustion limit parameters based on GA-SVM was constructed by coupling genetic algorithm (GA) and support vector machine (SVM). Meanwhile, the GA and particle swarm optimization algorithm (PSO) were used to optimize the back propagation neural network (BPNN) to construct the GA-BPNN and PSO-BPNN prediction models, respectively. To predict the intensity of air leakage of the upper limit of coal spontaneous combustion in the goaf, the prediction results of the models were compared and analyzed using MAE, MAPE, RMSE, and R² as the prediction performance evaluation indexes. The results show that the MAE of the GA-SVM model, the PSO-BPNN model, and the GA-BPNN model are 0.0960, 0.1086, and 0.1309, respectively; the MAPE is 2.46%, 3.11%, and 3.69%, respectively; the RMSE is 0.1180, 0.1789, and 0.2212, respectively; and the R² is 0.9921, 0.9818, and 0.9722. The prediction results of the GA-SVM model are the most optimal in four evaluation indexes, followed by the PSO-BPNN and the GA-BPNN models. Applying each model to the prediction of minimum residual coal thickness in the goaf of a coal mine in Shanxi, the GA-SVM model has higher accuracy, which further verifies the universality and stability of the model and its suitability for the prediction of coal spontaneous combustion limit parameters.

The current methods for detecting coal gangue face several challenges, including low detection accuracy, a high probability of missed detections, and inadequate real-time performance. These issues stem from the complexities associated with diverse industrial environments and mining conditions, such as the mixing of coal gangue and insufficient illumination within coal mines. A detection model, referred to as EBD-YOLO, is proposed based on YOLOv11n. First, the C3k2-EMA module is integrated with the EMA attention mechanism within the C3k2 module of the backbone network, thereby enhancing the model’s feature extraction capabilities. Second, the introduction of the BiFPN module reduces computational complexity while enriching both semantic information and detail within the model. Finally, the incorporation of the DyHead detector head further enhances the model’s ability to express features in complex environments. The experimental results indicate that the precision (P) and recall (R) of the EBD-YOLO model are 88.7% and 83.9%, respectively, while the mean average precision (mAP@0.5) is 91.7%. These metrics represent increases of 3.4%, 3.7%, and 3.9% compared to those of the original model, respectively. Additionally, the frames per second (FPS) improved by 10.01%. Compared to the mainstream YOLO target detection algorithms, the EBD-YOLO detection model achieves the highest mAP@0.5 while maintaining superior detection speed. It exhibits a slight increase in computational load, despite an almost unchanged number of parameters, and demonstrates the best overall detection performance. The EBD-YOLO detection model effectively addresses the challenges of missed detections, false detections, and real-time detection in the complex environment of coal mines.

In order to ensure the safety of coal mine production, a mine water source identification model is proposed to improve the accuracy of mine water inrush source identification and effectively prevent water inrush accidents based on kernel principal component analysis (KPCA) and improved sparrow search algorithm (ISSA) optimized kernel extreme learning machine (KELM). Taking Zhaogezhuang mine as the research object, firstly, Na⁺, Ca²⁺, Mg²⁺, Cl^-, SO2- 4 and HCO- 3 were selected as evaluation indexes, and their correlation was analyzed by SPSS27 software, with reducing the dimension of the original data by KPCA. Secondly, the Sine Chaotic Mapping, dynamic adaptive weights, and Cauchy Variation and Reverse Learning were introduced to improve the Sparrow Search Algorithm (SSA) to strengthen global search ability and stability. Meanwhile, the ISSA was used to optimize the kernel parameters and regularization coefficients in the KELM to establish a mine water inrush source discrimination model based on the KPCA-ISSA-KELM. Then, the mine water source data are input into the model for discrimination in compared with discrimination results of KPCA-SSA-KELM, KPCA-KELM, ISSA-KELM, SSA-KELM and KELM models. The results of the study show as follows: The discrimination results of the KPCA-ISSA-KELM model are in agreement with the actual results. Compared with the other models, the accuracy of the KPCA-ISSA-KELM model is improved by 8.33%, 12.5%, 4.17%, 21.83%, and 25%, respectively. Finally, when these models were applied to discriminate water sources in a coal mine in Shanxi, and the misjudgment rates of each model were 28.57%, 19.05%, 14.29%, 23.81%, 9.52% and 4.76%, respectively. From this, the KPCA-ISSA-KLEM model is the most accurate about discrimination and significantly better than other models in other evaluation indicators, verifying the universality and stability of the model. It can be effectively applied to the discrimination of inrush water sources in mines, providing important guarantees for mine safety production.