With the rapid development of the Industrial Internet of Things in rotating machinery, the amount of data sampled by mechanical vibration wireless sensor networks (MvWSNs) has increased significantly, straining bandwidth capacity. Concurrently, the safety requirements for rotating machinery have escalated, necessitating enhanced real-time data processing capabilities. Conventional methods, reliant on experiential approaches, have proven inefficient in meeting these evolving challenges. To this end, a fault detection method for rotating machinery based on mobileNet in MvWSNs is proposed to address these intractable issues. The small and light deep learning model is helpful to realize nearly real-time sensing and fault detection, lightening the communication pressure of MvWSNs. The well-trained deep learning is implanted on the MvWSNs sensor node, an edge computing platform developed via embedded STM32 microcontrollers (STMicroelectronics International NV, Geneva, Switzerland). Data acquisition, data processing, and data classification are all executed on the computing- and energy-constrained sensor node. The experimental results demonstrate that the proposed fault detection method can achieve about 0.99 for the DDS dataset and an accuracy of 0.98 in the MvWSNs sensor node. Furthermore, the final transmission data size is only 0.1% compared to the original data size. It is also a time-saving method that can be accomplished within 135 ms while the raw data will take about 1000 ms to transmit to the monitoring center when there are four sensor nodes in the network. Thus, the proposed edge computing method shows good application prospects in fault detection and control of rotating machinery with high time sensitivity.
15 November 2022 in IEEE Transactions on Industrial Informatics
This article proposes a novel edge collaborative compressed sensing for mechanical vibration monitoring (MVM) to address the severe shortage of storage and computational resources and long delay in transmitting massive vibration data in wireless sensor networks (WSN) for MVM. It first combines compressed sensing and edge computing (EC) into a WSN to effectively solve the above-mentioned problems. Based on the self-developed acquisition node (AN) and EC node (ECN), the proposed approach is implemented in the AN and ECN, respectively. This enhances the acquisition efficiency and computing capacity of the WSN. Meanwhile, the sparse pattern of a mechanical fault signal is analyzed. In addition, the adaptive parameter adjustment mechanism for the alternating direction of multiplier method based on Anderson acceleration is proposed to generate a convex optimization algorithm with fast convergence to realize data reconstruction in the ECN. The results of comprehensive experiments demonstrate that the proposed method can reduce the transmission data by 70%, while maintaining high-precision bearing fault feature detection, compared with the Shannon sampling theory. Furthermore, the acquisition and transmission efficiencies are improved significantly. This provides a potential solution for practical engineering applications.
20 December 2022 in IEEE Transactions on Industrial Electronics
To address the difficulties of severe lack of storage and computational resources and high delay of transmitting massive vibration data in wireless sensor networks (WSN) for mechanical vibration monitoring (MVM), this article proposes a novel multilevel adaptive near-lossless compression in edge collaborative WSN multilevel adaptive near-lossless compression (MANLC) for MVM, which could effectively solve the above problems. On the one hand, the sparse pattern of mechanical fault signals is analyzed. An MANLC method is proposed to characterize mechanical fault feature information with high accuracy in low storage space, and the proposed method is implemented on the self-developed acquisition node (AN), which effectively improves the storage space and transmission efficiency. On the other hand, the edge computing (EC) technique is integrated into WSN, and data reconstruction and high-precision feature detection are efficiently implemented on the self-developed EC node, which effectively reduces the storage and computing pressure of the data center server. The comprehensive experiments demonstrate that high-precision data reconstruction and feature detection could be achieved in the proposed approach from measurements that occupy a little storage space of the AN. The computational power and transmission efficiency of WSN are significantly improved, which provides a potential solution for practical engineering applications.
6 December 2022 in IEEE Internet of Things Journal
Limitations pertaining to the storage capacity and bandwidth of wireless sensor networks (WSNs) for mechanical vibration monitoring (MVM) pose difficulties in the realization of reliable and energy-efficient communication of big data. To prolong the lifetime of battery-limited WSNs, this article proposes a multilayer joint optimization of packet size and adaptive transmission scheduling (ATS) to jointly optimize the energy consumption of acquisition nodes from the storage and transmission layers. First, owing to the frequent storage and transmission of massive mechanical vibration data in WSNs, the packet size significantly affects the energy consumption during storage and transmission. The proposed packet size optimization based on the lowest energy consumption (PSO-LEC) model optimizes the energy consumption of acquisition nodes from three aspects: 1) writing; 2) reading; and 3) transmission of data. Second, when transmitting massive vibration data frequently, the direct beacon frame conflict and indirect beacon frame conflict markedly induce data conflict and delay problems. Therefore, ATS based on the time division multiple access (TDMA/ATS) method is proposed to optimize the errors in data collision and transmission delay. Thus, the packet size and ATS are considered jointly to improve the network lifetime for MVM. Comprehensive experimental results indicate that the transmission reliability and energy efficiency of the proposed scheme are significantly improved, and the network life is effectively prolonged for MVM.
27 April 2023 in Journal of Physics D: Applied Physics
Vibration energy harvesting is promising for powering wireless sensor networks for mechanical equipment monitoring. Considering the broadband feature of ambient vibrations, a novel L-shaped self-adaptive piezoelectric energy harvester (LSA-PEH) with a slider is proposed. A linearized mathematical model of the LSA-PEH is established to obtain the relationship between its resonant frequency and the slider position. The maximum resonant frequency that can be achieved by the LSA-PEH is predicted based on the linearized model. The corresponding condition is to fix the slider at around 0.08 m, which is a nodal point. Moreover, the theoretical model explains why the slider moves back and forth when the excitation frequency is 40 Hz. Experimental results show that the slider of the proposed LSA-PEH can passively relocate its position to adjust its resonant frequency and maintain resonance. By the same criteria, the bandwidth of the proposed LSA-PEH is increased by 350% compared to a conventional L-shaped beam harvester.
Wireless Sensor Networks (WSNs) for condition monitoring of mechanical equipment have been shown effective for ensuring operation safety and reducing breakdown losses. For battery-supply sensor nodes, energy efficiency for data transmission of mass vibration signals has become a significant challenge. In this paper, an efficient low redundant data method is designed and implemented in the WSN nodes for reliable transmission. The proposed method includes two stages. Stage 1 involves the delta-Discrete Cosine Transform (delta-DCT) that reduces the temporal and frequency redundancy of the original data so that the transferred data can be downsized via range coding. In stage 2, the sparse random reconstruction is injected to increase the redundancy of the compressed data to guarantee reliable transmission. Experimental results demonstrate the original data can be downsized to 50%~55%, the compression data can be recovered via sparse reconstruction without any data loss.