In endodontic treatment, regardless of the instrumentation technique, the presence of a smear layer covering contaminated dentin walls is always a concern. Thus, irrigation plays an essential role in reducing bacterial load. To enhance irrigation effectiveness, different ultrasonic activation methods and the use of different tips have been studied. This study assessed the cleaning capacity of the novel NiTi ultrasonic tip for smear layer removal using ultrasonically activated irrigation (UAI) with passive or continuous ultrasonic irrigation (PUI or CUI, respectively), compared with conventional irrigation. Forty-five single-rooted human mandibular premolars were decoronated to a standardized length of 16 mm. Instrumentation was performed using the Genius system up to size 50.04 and irrigated with 3% NaOCl. The specimens were divided into three groups (n = 15) according to the final irrigation activation technique: conventional irrigation (CI), as control group; PUI; and CUI, following the manufacturer’s protocol. The samples were longitudinally cleaved and analyzed under a scanning electron microscope for smear layer removal according to a cleanliness score for the cervical, middle, and apical thirds. Data were evaluated by means of the Kruskal-Wallis and Tukey’s tests, with a 5% level of significance. UAI enhanced cleaning compared to conventional irrigation, mainly at the apical third. CUI showed the best results, with statistically significant lower scores than PUI and CI (p < 0.05). Final irrigant activation with the NiTi tip showed better cleaning capacity than conventional irrigation. In addition, CUI resulted in better smear layer removal than PUI.
23 January 2023 in International Endodontic Journal
This study aimed to assess the cyclic fatigue resistance of Genius and EdgeFile X1 reciprocating instruments compared with WaveOne Gold Primary. Twenty Genius (Ultradent) 25.04, 20 Genius 30.04, 20 EdgeFile X1 (EdgeEndo) and 20 WaveOne Gold Primary (Dentsply Maillefer) instruments were included in this study and tested in a static cyclic fatigue testing device, which has an artificial stainless steel canal with a 60° angle of curvature and a 5-mm radius of curvature. All instruments were operated in reciprocation mode until fracture occurred. The number of cycles to failure (NCF) was calculated and time to fracture (TF) was recorded in seconds using a digital chronometer. The mean and standard deviations of NCF and TF were calculated for each reciprocating system and the data were subjected to Kruskal-Wallis one-way analysis of variance and to Dunn's test (p < .05) using SigmaPlot software (Systat software, CA, USA). The fractured surfaces of five instruments from each brand were randomly examined and microphotographed by a low-vacuum environmental scanning electron microscopy – SEM (Tabletop Microscope TM3030, Hitachi, Japan) to confirm the cyclic fatigue fracture. EdgeFile exhibited the highest cyclic fatigue resistance, followed by both Genius files (p < .05). Within the limitations of this in vitro study, EdgeFile X1 instruments had significantly higher cyclic fatigue resistance than did Genius and WaveOne Gold Primary instruments. The cyclic fatigue resistance of both Genius files was higher than that of WaveOne Gold Primary.
This study evaluated the biocompatibility, biomineralization, and collagen fiber maturation induced by Resorbable Tissue Replacement (RTR®; β-tricalcium phosphate [TCP]), Bioglass (BIOG; bioactive glass), and DM Bone® (DMB; hydroxyapatite and β-TCP) in vivo. Sixty-four polyethylene tubes with or without (control group; CG) materials (n=8/group/period) were randomly implanted in the subcutaneous tissue of 16 male Wistar rats (four per rat), weighting 250 to 280 g. The rats were killed after 7 and 30 days (n=8), and the specimens were removed for analysis of inflammation using hematoxylin-eosin; biomineralization assay using von Kossa (VK) staining and polarized light (PL); and collagen fiber maturation using picrosirius red (PSR). Nonparametric data were statistically analyzed by Kruskal-Wallis and Dunn tests, and parametric data by one-way ANOVA test (p0.05). At 30 days, there was mild inflammation in the BIOG and CG, and moderate inflammation in the RTR and DMB groups, with a significant difference between the CG and RTR (p0.05), although DMB exhibited more mature fibers than BIOG at 30 days (p<0.05). RTR, BIOG, and DMB were biocompatible, inducing inflammation that reduced over time and biomineralization in the subcutaneous tissue of rats. DMB exhibited more mature collagen fibers than BIOG over a longer period.
3 October 2023 in International Endodontic Journal