Joining metallic alloys can be an intricate task, being necessary to take into account the material characteristics and the application in order to select the appropriate welding process. Among the variety of welding methods, pulsed laser technology is being successfully used in the industrial sector due to its beneficial aspects, for which most of them are related to the energy involved. Since the laser beam is focused in a concentrated area, a narrow and precise weld bead is created, with a reduced heat affected zone. This characteristic stands out for thinner material applications. As a non-contact process, the technique delivers flexibility and precision with high joining quality. In this sense, the present review addresses the most representative investigations developed in this welding process. A summary of these technological achievements in metallic metals, including steel, titanium, aluminium, and superalloys, is reported. Special attention is paid to the microstructural formation in the weld zone. Particular emphasis is given to the mechanical behaviour of the joints reported in terms of microhardness and strength performance. The main purpose of this work was to provide an overview of the results obtained with pulsed laser welding technology in diverse materials, including similar and dissimilar joints. In addition, outlook and remarks are addressed regarding the process characteristics and the state of knowledge.

Aluminium alloys exhibit eco-friendly aspects related to global environmental issues, such as almost unlimited recyclability. Nevertheless, some intrinsic characteristics are challenges to explore all their benefits. In the welding process, the high thermal conductivity and low melt point require high control of heat input. Alternatively, the pulsed laser mode provides a sharp beam focus with precise control enabling regulating the energy delivered. In this sense, this present work analysed the effect of pulsed laser welding parameters on 3-mm-thick AA5083 aluminium alloy sheets. Trials targeted to develop sound welds with minimum defect and high penetration depth adopting statistical methods. The optimum parameter arrangement was achieved by varying peak power, spot diameter, and pulse duration. Finally, the best parameter combination was applied using different pulse shapes to mitigate crack formation and pores. As a result, the pulse shape with step-down at the end of each pulse generated crack-free spot welds.

Root pass is a fundamental step in multi-pass welding. In gas metal arc welding (GMAW), the weld bead qualities depend on the process parameters, filler materials, and welder abilities. This work investigates the effect of a Nd: YAG pulsed laser as a first pass to reduce the welders’ reliance on the AH36 low-alloy steel with 5.5 mm thickness. This autogenous automatable process delivers reduced thermal impact due to the concentrated high-energy source, pulse overlap, and higher penetration depth-to-power ratio than continuous lasers. The outcomes indicate that the PL as a root welding generated a small HAZ compared to the GMAW condition. In addition, the subsequent arc passes positively affected the microstructure, reducing the hardness from around 500 to 230 HV. The PL + GMAW achieved similar strength results to the GMAW, although its Charpy impact values at −50 °C were around 15% lower than the arc condition.

Repairing links of offshore mooring chains has presented a significant industry challenge, primarily arising from modifications in material properties, encompassing alterations in microstructure, hardness, and residual stress. In this context, the present work investigates the method of friction hydro-pillar processing (FHPP) applied to R4 grade mooring chain steel. Joints in as-repaired and post-weld heat treatment (PWHT) conditions were subjected to residual stress (RS) tests using the neutron diffraction technique, microhardness mapping, and microstructural evaluations. The process generated peaks of tensile and compressive stresses in different directions and hardness below that of the parent material in the softening zone. The friction zone promoted high hardness levels in the thermo-mechanically affected zone (TMAZ) with a maximum of 19% of the ultimate tensile strength of the parent material. As expected, the PWHT restored the RS and reduced the hardness; however, 4 h PWHT allowed the elimination of a hardness higher than that of the base material.