In this paper, we propose a novel, magnetically driven microrobot equipped with a frame structure to measure the effects of stimulating aquatic microorganisms. The design and fabrication of the force-sensing structure with a displacement magnification mechanism based on beam deformation are described. The microrobot is composed of a Si–Ni hybrid structure constructed using micro-electro-mechanical system (MEMS) technologies. The microrobots with 5 μm-wide force sensors are actuated in a microfluidic chip by permanent magnets so that they can locally stimulate the microorganisms with the desired force within the stable environment of the closed microchip. They afford centimetre-order mobility (untethered drive) and millinewton-order forces (high power) as well as force-sensing. Finally, we apply the developed microrobots for the quantitative evaluation of the stimuation of Pleurosira laevis (P. laevis) and determine the relationship between the applied force and the response of a single cell.
An eggshell is a porous microstructure that regulates the passage of gases to allow respiration. The chick embryo and its circulatory system enclosed by the eggshell has become an important model for biomedical research such as the control of angiogenesis, cancer therapy, and drug delivery test, because the use of embryo is ethically acceptable and it is inexpensive and small. However, chick embryo and extra-embryonic blood vessels cannot be accessed freely and has poor observability because the eggshell is tough and cannot be seen through, which limits its application. In this study, a novel artificial eggshell with functionalized surface is proposed, which allows the total amount of oxygen to pass into the egg for the chick embryo culturing and has high observability and accessibility for embryo manipulation. First, a 40-mm enclosed cubic-shaped eggshell consisting of a membrane structure and a rigid frame structure is designed, and then the threshold of the membrane thickness suitable for the embryo survival is figured out according to the oxygen-permeability of the membrane structure. The designed artificial eggshell was actually fabricated by using polydimethylsiloxane (PDMS) and polycarbonate (PC) in the current study. Using the fabricated eggshell, chick embryo and extra-embryonic blood vessels can be observed from multiple directions. To test the effectiveness of the design, the cubic eggshells were used to culture chick embryos and survivability was confirmed when PDMS membranes with adequate oxygen permeability were used. Since the surface of the eggshell is transparent, chick embryo tissue development could be observed during the culture period. Additionally, the chick embryo tissues could be accessed and manipulated from outside the cubic eggshell, by using mechanical tools without breakage of the eggshell. The proposed “Egg-in-Cube” with functionalized surface has great potential to serve as a promising platform for biomedical research.
27 January 2023 in International Journal of Systematic and Evolutionary Microbiology
A bacterial strain, WON2089T, was isolated from the faeces of healthy Japanese adults and is able to use mucin as the sole carbon and nitrogen source. Sequencing of its 16S rRNA gene showed that WON2089T has 98.0 and 94.4% similarity to Akkermansia muciniphila MucT and Akkermansia glycaniphila PytT, respectively, while phylogenetic tree analysis confirmed that it belongs to the genus Akkermansia. The whole genome of WON2089T was sequenced, which showed that it shares 84.5 % average nucleotide identity (ANI) and 24.9 % digital DNA–DNA hybridization (dDDH) with its closest relative, A. muciniphila MucT. Cells of WON2089T are non-motile, anaerobic and oval-shaped (0.4–0.5×0.5–1.0 µm). The strain is Gram-stain-negative and grows in the temperature range of 25–45 °C (optimum, 30–37 °C) and pH range of pH 5.5–9.5 (optimum, pH 6.5–8.0). WON2089T can utilize d-glucose, d-mannitol, lactose and d-mannose, as assessed by API20A strips. The major cellular fatty acids are C15 : 0 anteiso, C15 : 0 3OH and C18 : 1 ω9c (55.5, 7.5 and 5.8 % of total fatty acids, respectively). Based on 16S rRNA sequencing, ANI, dDDH and acid formation from d-mannitol, WON2089T is distinct from previously reported species of the genus Akkermansia. Based on phenotypic, phylogenetic and genetic characteristics, WON2089T represents a novel species of the genus Akkermansia and the name Akkermansia biwaensis sp. nov. is proposed. The type strain is WON2089T (= NBRC 115679T= DSM 114407T).
1 June 2021 in American Journal of Physiology-Cell Physiology
Cells adapt to applied cyclic stretch (CS) to circumvent chronic activation of proinflammatory signaling. Currently, the molecular mechanism of the selective disassembly of actin stress fibers (SFs) in the stretch direction, which occurs at the early stage of the cellular response to CS, remains controversial. Here, we suggest that the mechanosensitive behavior of myosin II, a major cross-linker of SFs, primarily contributes to the directional disassembly of the actomyosin complex SFs in bovine vascular smooth muscle cells and human U2OS osteosarcoma cells. First, we identified that CS with a shortening phase that exceeds in speed the inherent contractile rate of individual SFs leads to the disassembly. To understand the biological basis, we investigated the effect of expressing myosin regulatory light-chain mutants and found that SFs with less actomyosin activities disassemble more promptly upon CS. We consequently created a minimal mathematical model that recapitulates the salient features of the direction-selective and threshold-triggered disassembly of SFs to show that disassembly or, more specifically, unbundling of the actomyosin bundle SFs is enhanced with sufficiently fast cell shortening. We further demonstrated that similar disassembly of SFs is inducible in the presence of an active LIM-kinase-1 mutant that deactivates cofilin, suggesting that cofilin is dispensable as opposed to a previously proposed mechanism.
The chorioallantoic membrane (CAM) containing tiny blood vessels is an alternative to large animals for studies involving angiogenesis and tissue engineering. However, there is no technique to design the direction of growing blood vessels on the CAM at the microscale level for tissue engineering experiments. Here, a methodology is provided to direct blood vessel formation on the surface of a three-dimensional egg yolk using a cubic artificial eggshell with six functionalized membranes. A structure on the lateral side of the eggshell containing a straight channel and an interlinked chamber was designed, and the direction and formation area of blood vessels with blood flow was artfully defined by channels with widths of 70–2000 μm, without sharply reducing embryo viability. The relationship between the size of interlinked chamber and the induction of blood vessels was investigated to establish a theory of design. Role of negative and positive pressure in the induction of CAM with blood vessels was investigated, and air pressure change in the culture chamber was measured to demonstrate the mechanism for blood vessel induction. Histological evaluation showed that components of CAM including chorionic membrane and blood vessels were induced into the channels. Based on our design theory, blood vessels were induced into arrayed channels, and channel-specific injection and screening were realized, which demonstrated proposed applications. The platform with position- and space-controlled blood vessels is therefore a powerful tool for biomedical research, which may afford exciting applications in studies involved in local stimulation of blood vessel networks and those necessary to establish a living system with blood flow from a beating heart.