River and lake dredging projects inevitably produce significant quantities of wastewater and sediment. This accumulation results in dredged soil with high moisture content, characterized by low strength, rendering it unsustainable for use. To facilitate environmentally friendly utilization of wastewater and sediment, solidifying agents and basalt fibers are introduced to solidify the wastewater within the dredged sediment. This process transforms the wastewater, sediment, solidifying agents, and basalt fibers into a novel, strengthened material. This transformation allows for their application as stabilized soil for engineering endeavors. Indoor experiments and scanning electron microscope analyses were performed to examine the deformation characteristics of fiber-stabilized soil and analyze its micro-mechanisms. Research findings suggest that as the curing age increases, the curing agent’s reaction becomes more comprehensive. Fibers have the potential to ameliorate soil damage. The proposed binary-medium model’s applicability and accuracy were validated through the analysis of triaxial test results employing the reinforcement principle. These findings establish a theoretical foundation for the resourceful utilization of wastewater and sediment.
Coastal reclamation projects generate an accumulation of wastewater and waste soil, resulting in highly saturated soft soil. Presently, there is a scarcity of research regarding the lightweight solidification and three-dimensional mechanical properties of these soils. Additionally, there is a dearth of specialized models for stabilizing soils containing wastewater using lightweight solidification technology, and pertinent engineering solutions are lacking. By introducing solidifying agents and foaming agents to treat wastewater in soft fill soil, a novel type of solidified lightweight material is produced, imparting strength. This study investigates its three-dimensional mechanical properties. During triaxial tests with equal stress (σ3) and equal b values, the softening of the curve noticeably diminished at b = 0.25. In the plane strain test, cohesion increased by 10.7% compared to the traditional triaxial tests, and the internal friction angle increased by 11%. Subsequently, a three-dimensional Cambridge model was established. At elevated confining pressures, the corrected curve closely approximated the test curve, demonstrating a minimum model accuracy of approximately 96% at a confining pressure of 20 KPa. These findings offer valuable numerical references and a theoretical foundation for the efficient utilization of wastewater and waste soil.