The rational and effective disposal of sludge has always been a key topic of interest. Freeze—thaw cycles can change the mechanical properties and structural characteristics of soils, leading to a range of engineering geological problems. The sludge curing technology can be used to transform municipal sludge into a new type of sludge-cured lightweight soil. The effects of the number of freeze-thaw cycles and freezing temperature on the unconfined compressive strength and compression modulus of the improved sludge-solidified lightweight soil were investigated by unconfined compressive strength and one-dimensional compression tests. A structural quantitative parameter that considers the freeze-thaw cycles, i.e., the freeze-thaw structural potential, is proposed. The variation pattern of the freeze-thaw structural potential under the influence of different factors was analysed. The test results show that the strength and compression modulus initially rapidly decreased, and then tended to be stable with the increase in the number of freeze-thaw cycles. A lower freezing temperature led to smaller strength and compression modulus. The first two freeze-thaw cycles had a greater influence on the freeze-thaw structure potential. The influence of freezing temperature on the freeze-thaw structural potential is significant when the pressure and number of freeze-thaw cycles are small, and diminishes as the pressure and number of freeze-thaw cycles increase. It was found that there was a good non-linear relationship between the freeze-thaw structural potential and both the unconfined compressive strength and compressive modulus. On this basis, models for the freeze-thaw structural potential as a function of the unconfined compressive strength and compression modulus, taking into account the effects of freezing temperature and the number of freeze-thaw cycles, are proposed respectively, and the accuracy of the models is further verified. The results can provide a reference for the applications of solidified light soil in various fields including engineering fillings in seasonally frozen areas.
In this paper, a new method for predicting wave overtopping discharges of Accropode armored breakwaters using the non-hydrostatic wave model Simulating WAves till SHore (SWASH) is presented. The apparent friction coefficient concept is proposed to allow the bottom shear stress term calculated in the momentum equation to reasonably represent the effect of comprehensive energy dissipation caused by the roughness and seepage during the wave overtopping process. A large number of wave overtopping cases are simulated with a calibrated SWASH model to determine the values of equivalent roughness coefficients so that the apparent friction coefficients can be estimated to achieve the conditions with good agreement between numerical overtopping discharges and those from the EurOtop neural network model. The relative crest freeboard and the wave steepness are found to be the two main factors affecting the equivalent roughness coefficient. A derived empirical formula for the estimation of an equivalent roughness coefficient is presented. The simulated overtopping discharges by the SWASH model using the values of the equivalent roughness coefficient estimated from the empirical formula are compared with the physical model test results. It is found that the mean error rate from the present model predictions is 0.24, which is slightly better than the mean error rate of 0.26 from the EurOtop neural network model.
The presence of diatoms in diatomaceous soil gives it geotechnical properties that are unusual compared with common clays. The most typical physical property of diatomaceous soil is its abnormally high Atterberg limits compared to fine-grained soil without diatoms. For diatomaceous soil, the Atterberg limits are associated with many factors, such as diatom content, diatom crushing degree, etc. In the study reported here, it was ascertained that more diatoms lead to higher plastic and liquid limits. Once the diatoms are crushed, the plastic and liquid limits decrease. The pore fluid salt concentration barely influenced the Atterberg limits of diatomaceous soil. Additionally, the porous diatom microstructure and trimodal pore size distribution of diatomaceous soil were investigated via scanning electron microscopy, transmission electron microscopy, and mercury intrusion porosimetry. The underlying mechanism of abnormally high liquid and plastic limits of diatomaceous soil is revealed as the water stored in the special diatom microstructure. However, water in diatoms has no contribution to plasticity. Also discussed is the applicability of the current soil classification systems for diatomaceous soil. The findings of this study can help for a better understanding of Atterberg limits of diatomaceous soil and provide suggestions for the classification of diatomaceous soil.
6 April 2022 in Bulletin of Engineering Geology and the Environment
River and lake dredging projects inevitably produce significant quantities of wastewater and sediment. This accumulation results in dredged soil with high moisture content, characterized by low strength, rendering it unsustainable for use. To facilitate environmentally friendly utilization of wastewater and sediment, solidifying agents and basalt fibers are introduced to solidify the wastewater within the dredged sediment. This process transforms the wastewater, sediment, solidifying agents, and basalt fibers into a novel, strengthened material. This transformation allows for their application as stabilized soil for engineering endeavors. Indoor experiments and scanning electron microscope analyses were performed to examine the deformation characteristics of fiber-stabilized soil and analyze its micro-mechanisms. Research findings suggest that as the curing age increases, the curing agent’s reaction becomes more comprehensive. Fibers have the potential to ameliorate soil damage. The proposed binary-medium model’s applicability and accuracy were validated through the analysis of triaxial test results employing the reinforcement principle. These findings establish a theoretical foundation for the resourceful utilization of wastewater and sediment.