Conventional model-free control (MFC) is widely used in motor drives due to its simplicity and model independence, yet its performance suffers from imperfect disturbance estimation and input gain mismatch. To address these issues, this paper proposes an adaptive enhanced model-free speed control (AEMFSC) scheme based on an ultra-local model for permanent magnet synchronous motor (PMSM) drives. First, by integrating a nonlinear disturbance observer (NDOB) and a PD control law into the generalized model-free controller, an enhanced model-free speed controller (EMFSC) was developed to ensure closed-loop stability. Compared with a conventional MFSC, the proposed method eliminated steady-state errors, reduced the speed overshoot, and achieved faster settling with improved disturbance rejection. Second, to address the performance degradation induced by input gain mismatch during time-varying load conditions, we developed an online parameter identification method for real-time estimation. This adaptive mechanism enabled automatic controller parameter adjustment, which significantly enhanced the transient tracking performance of the PMSM drive. Furthermore, an algebraic-framework-based high-precision identification technique is proposed to optimize the initial selection, which effectively reduces the parameter tuning effort. Simulation and experimental results demonstrated that the proposed AEMFSC significantly enhanced the PMSM’s robustness against load torque variations and parameter uncertainties.
Conventional model-free control (MFC) is widely used in motor drives for its simplicity and model independence, yet suffers from inaccurate disturbance estimation and parameter mismatches. This paper proposes an adaptive enhanced model-free speed control (AEMFSC) scheme for permanent magnet synchronous motors (PMSMs) that integrates a nonlinear disturbance observer (NDO) with PD control to improve disturbance rejection and tracking performance. The method eliminates steady-state errors, reduces speed overshoot, and achieves faster settling compared to conventional approaches. An online parameter identification technique adapts the input gain α to varying loads, while an algebraic framework optimizes initial α selection. Experimental results confirm enhanced robustness against load and parameter variations.
2 January 2019 in Mechanics of Advanced Materials and Structures
This article presents a model to characterize the lateral expansion of metal cylinder expanded by polymer filler and analyzes the influencing factors to the expansion. Based on the elastoplastic theory of thick-walled cylinder and the Drucker–Prager yield criterion, the expansion model which considers the material properties and dimensions of the filler and the cylindrical shell is constructed. To verify the accuracy of the model, a series of experiments, compared with the model, are conducted under different conditions (different materials of the filler, different thickness, and materials of the cylindrical shell), which illustrates that the proposed model is able to capture the response observed in experimental tests. Meanwhile, it is demonstrated that the relationship between axial stress and radial strain of the expansive specimen is mainly determined by the properties of the cylindrical shell instead of those of the filler, and the expansion decreases with the growth of the hydrostatic pressure.