Conventional model-free control (MFC) is widely used in motor drives due to its simplicity and model independence, yet its performance suffers from imperfect disturbance estimation and input gain mismatch. To address these issues, this paper proposes an adaptive enhanced model-free speed control (AEMFSC) scheme based on an ultra-local model for permanent magnet synchronous motor (PMSM) drives. First, by integrating a nonlinear disturbance observer (NDOB) and a PD control law into the generalized model-free controller, an enhanced model-free speed controller (EMFSC) was developed to ensure closed-loop stability. Compared with a conventional MFSC, the proposed method eliminated steady-state errors, reduced the speed overshoot, and achieved faster settling with improved disturbance rejection. Second, to address the performance degradation induced by input gain mismatch during time-varying load conditions, we developed an online parameter identification method for real-time estimation. This adaptive mechanism enabled automatic controller parameter adjustment, which significantly enhanced the transient tracking performance of the PMSM drive. Furthermore, an algebraic-framework-based high-precision identification technique is proposed to optimize the initial selection, which effectively reduces the parameter tuning effort. Simulation and experimental results demonstrated that the proposed AEMFSC significantly enhanced the PMSM’s robustness against load torque variations and parameter uncertainties.
Conventional model-free control (MFC) is widely used in motor drives for its simplicity and model independence, yet suffers from inaccurate disturbance estimation and parameter mismatches. This paper proposes an adaptive enhanced model-free speed control (AEMFSC) scheme for permanent magnet synchronous motors (PMSMs) that integrates a nonlinear disturbance observer (NDO) with PD control to improve disturbance rejection and tracking performance. The method eliminates steady-state errors, reduces speed overshoot, and achieves faster settling compared to conventional approaches. An online parameter identification technique adapts the input gain α to varying loads, while an algebraic framework optimizes initial α selection. Experimental results confirm enhanced robustness against load and parameter variations.
Ultra-local model-free control (MFSC) for permanent magnet synchronous motor (PMSM) drives exhibits inherent limitations in rejecting periodic disturbances due to the reactive nature of its lumped disturbance observer, which is constrained by finite bandwidth and input gain mismatch. These factors introduce amplitude and phase errors, resulting in persistent steady-state speed ripples. To overcome this structural limitation, this paper proposes an angle-based repetitive compensator (ABRC) embedded within the MFSC framework. Grounded in the internal model principle, the ABRC operates in parallel with the disturbance observer, learning the periodic residual disturbances over one mechanical cycle in the angle domain and applying them as a feedforward compensation term in subsequent cycles. A comprehensive stability and convergence analysis is conducted, explicitly accounting for discrete-time implementation, FIR filtering delays, angle interpolation effects, and input gain mismatch. Experimental results demonstrate that the proposed control strategy effectively suppresses motor speed ripples, exhibiting favorable steady-state and transient performance.