In this paper, a range-gated LIDAR system utilizing an LN crystal as the electro-optical switch and a SCMOS (scientific complementary metal oxide semiconductor) imaging device is designed. To achieve range-gated operations, we utilize two polarizers and an LN (LiNbO3) crystal to form an electro-optical switch. The optical switch is realized by applying a pulse voltage at both ends of the crystal due to the crystal’s conoscopic interference effect and electro-optical effect. The advantage of this system is that low-bandwidth detectors, such as a CMOS and a CCD (charge-coupled device), can be used to replace conventional high-bandwidth detectors, such as an ICCD (intensified charge-coupled device), and it displays better imaging performance under specific conditions at the same time. However, after using an electro-optical crystal as an optical switch, a new inhomogeneity error will be introduced due to the conoscopic interference effect of the electro-optical crystal, resulting in a range error for the LIDAR system. To reduce the influence of inhomogeneity error on the system, this paper analyzes the sources of inhomogeneity error caused by the electro-optical crystal and calculates the crystal’s inhomogeneity mathematical expression. A compensation method is proposed based on the above inhomogeneity mathematical expression. An experimental LIDAR system is constructed in this paper to verify the validity of the compensation method. The experimental results of the range-gated LIDAR system show that in a specific field of view (2.6 mrad), the LIDAR system has good imaging performance; its ranging standard deviation is 3.86 cm and further decreases to 2.86 cm after compensation, which verifies the accuracy of the compensation method.

In this paper, a range-gated lidar system utilizing an LN crystal as the electro-optical switch and a SCMOS (Scientific Complementary Metal Oxide Semiconductor) imaging device is designed. To achieve range-gated, we utilize two polarizers and a LN (LiNbO3) crystal to form an electro-optical switch. The optical switch is realized by applying a pulse voltage at both ends of the crystal due to the crystal's conoscopic interference effect and electro-optical effect. The advantage of this system is that low-bandwidth detectors such as CMOS and CCD (Charge-coupled Device) can be used to replace conventional high-bandwidth detectors such as ICCD (Intensified Charge Coupled Device), and time it has better imaging performance under specific conditions at the same. However, after using an electro-optical crystal as an optical switch, a new inhomogeneity error will be introduced due to the conscopic interference effect of the electro-optical crystal, resulting in range error of the lidar system. To reduce the influence of inhomogeneity error on the system, this paper analyzes the sources of inhomogeneity error caused by the electro-optical crystal and gives the crystal inhomo-geneity mathematical expression. A compensation method is proposed based on the above inho-mogeneity mathematical expression. An experimental lidar system is constructed in this paper to verify the validity of the compensation method. The experimental results of the range-gated lidar system show that in a specific field of view (2.6mrad), the lidar system has a good imaging per-formance, its ranging standard deviation is 3.86cm and further decreased to 2.86cm after com-pensation, which verifies the accuracy of the compensation method.

In order to analyze the performance of a light detection and ranging system based on polarization modulation, it is necessary to theoretically analyze and model the polarization scattering characteristics of common target materials. In this paper, the shortcomings of the classical Hyde pBRDF (polarization bidirectional reflectance distribution function) model are analyzed. Based on the research results of many researchers in recent years, a new six-parameter pBRDF model is proposed. To verify the accuracy of the proposed model, this paper builds a measurement system for the polarization scattering characteristics of the target surface in the laser active imaging scene, and the polarization scattering characteristics of two common materials, namely a white paint coating and an aluminum plate, are measured. Based on the measurement results of the DOP (degree of polarization) of the scattered light of the target material and the BBO-FA (biogeography-based optimization-Firefly algorithm) algorithm, we performed inversion calculations on the key parameters of the target material. Using the parameters of the target material obtained via inversion, we use the model to simulate the Stokes vectors of the target and compare the simulated values of Stokes vectors with the measured values to verify the accuracy of the model. The verification results show that the simulation results of Stokes vectors are in good agreement with the measurement results for these two materials, and the introduction of various improvements to the model can effectively improve the accuracy of the model, which provides a tool for studying the performance parameters of a laser three-dimensional imaging system based on polarization modulation.

Ground-based optical equipment for detecting geostationary orbit space targets typically involves long-exposure imaging, facing challenges such as small and blurred target images, complex backgrounds, and star streaks obstructing the view. To address these issues, this study proposes a GSTD-DETR model based on Real-Time Detection Transformer (RT-DETR), which aims to balance model efficiency and detection accuracy. First, we introduce a Dynamic Cross-Stage Partial (DynCSP) backbone network for feature extraction and fusion, which enhances the network’s representational capability by reducing convolutional parameters and improving information exchange between channels. This effectively reduces the model’s parameter count and computational complexity. Second, we propose a ResFine model with a feature pyramid designed for small target detection, enhancing its ability to perceive small targets. Additionally, we improve the detection head and incorporate a Dynamic Multi-Channel Attention mechanism, which strengthens the focus on critical regions. Finally, we designed an Area-Weighted NWD loss function to improve detection accuracy. The experimental results show that compared to RT-DETR-r18, the GSTD-DETR model reduces the parameter count by 29.74% on the SpotGEO dataset. Its AP₅₀ and AP_50:95 improve by 1.3% and 4.9%, reaching 88.6% and 49.9%, respectively. The GSTD-DETR model demonstrates superior performance in the detection accuracy of faint and small space targets.

LiDAR offers a wide range of uses in autonomous driving, remote sensing, urban planning, and other areas. The laser 3D point cloud acquired by LiDAR typically encounters issues during registration, including laser speckle noise, Gaussian noise, data loss, and data disorder. This work suggests a novel Student’s t-distribution point cloud registration algorithm based on the local features of point clouds to address these issues. The approach uses Student’s t-distribution mixture model (SMM) to generate the probability distribution of point cloud registration, which can accurately describe the data distribution, in order to tackle the problem of the missing laser 3D point cloud data and data disorder. Owing to the disparity in the point cloud registration task, a full-rank covariance matrix is built based on the local features of the point cloud during the objective function design process. The combined penalty of point-to-point and point-to-plane distance is then added to the objective function adaptively. Simultaneously, by analyzing the imaging characteristics of LiDAR, according to the influence of the laser waveform and detector on the LiDAR imaging, the composite weight coefficient is added to improve the pertinence of the algorithm. Based on the public dataset and the laser 3D point cloud dataset acquired in the laboratory, the experimental findings demonstrate that the proposed algorithm has high practicability and dependability and outperforms the five comparison algorithms in terms of accuracy and robustness.

A method for enhancing the resolution of 3D imaging reconstruction by employing the polarization modulation of electro-optical crystals is proposed. This technique utilizes two polarizers oriented perpendicular to each other along with an electro-optical modulation crystal to achieve high repetition frequency and narrow pulse width gating. By varying the modulation time series of the electro-optical crystal, three-dimensional gray images of the laser at different distances are acquired, and the three-dimensional information of the target is reconstructed using the range energy recovery algorithm. This 3D imaging system can be implemented with large area detectors, independent of the an Intensified Charge-Coupled Device (ICCD) manufacturing process, resulting in improved lateral resolution. Experimental results demonstrate that when imaging a target at the distance of 20 m, the lateral resolution within the region of interest is 2560 × 2160, with a root mean square error of 3.2 cm.