Condensed phase particles (CCPs) of plume flows in solid rocket motors (SRMs) are one of the major causes of smog and other signal characteristics, which leads to attenuation of weapons guidance system signals. In order to study the dynamic combustion characteristics of the exhaust plume in a high pressure solid rocket motor with highly-aluminized propellanta digital in-line holographic (DIH) measurement system was used for identification and analysis of CCPs of exhaust plume flows in a SRM under 10 MPa pressure. During the SRM firing, the plume particles characteristic in the field of 9–11.5 cm away from the non-expanding nozzle outlet plane was measured and analyzed. Further, in order to improve the efficiency and accuracy of particle identification, a target recognition method suitable for autonomous recognition of plume particles in a complex background from digital holographic images was established. About 12,400 individual particles from two thousand holographic images were recognized, and the 3D spatial information (number and volume probability density function) and mean diameters were obtained and analyzed. The results showed that digital in-line holography measurement technology with target recognition method established in this paper can be applied well to real-time measurement of the 3D dynamic characteristics of the plume particle field anywhere outside of the nozzle outlet of an SRM with highly aluminized propellants. By identifying each reconstructed particle, the 3D spatial distribution, CCPs size distribution and velocity in the measurement area can be obtained.
Digital inline holography has gained extensive application in the optical diagnosis of solid propellant combustion. However, this method confronts several challenges. Firstly, the calculation time required for reconstruction and depth of field extension is excessively long. Secondly, the excessive smoke, airflow, and flame during combustion cause significant interference and poor reconstruction quality, which reduces the accuracy of particle identification. To address these issues, we have developed a holographic image reconstruction technique for aluminum particle combustion based on the Attention Mechanism, U-net, and Diffusion models. This approach enables end-to-end reconstruction of aluminum particle combustion holographic images, while effectively circumventing the interference of airflow combustion and flame.
Electrically controlled solid propellants (ECSPs) are promising candidates for electrically driven energy conversion systems where electrical conduction, Joule heating, phase transition, and combustion processes are strongly coupled. However, the transient evolution of the solid–liquid phase transition and its interaction with electrical energy deposition remain insufficiently understood due to the lack of effective in situ diagnostic approaches. In this study, a laser-based optical diagnostic method combined with synchronized electrical measurements was developed to visualize and quantitatively characterize the transient phase transition and combustion surface evolution of ECSPs under electrical excitation. A controlled end-face energy-release configuration was established to regulate the electrical conduction pathway and achieve localized energy deposition. The proposed optical diagnostic method enables real-time observation of molten-phase formation, liquid-phase interconnection, and surface regression behaviors during the energy-release process. The results reveal that electrical activation initially induces the formation and expansion of a molten layer on the propellant surface, followed by rapid energy release triggered by the establishment of a continuous conductive pathway. Contact pressure significantly influences the phase transition and energy-release characteristics by modifying the interfacial contact conditions and electrical transport behavior. Furthermore, the surface regression process exhibits a strong correlation with the electrical response, demonstrating the coupling between energy deposition and material regression. This study provides an effective optical diagnostic approach for investigating transient phase transitions and electrothermal coupling behaviors in ECSPs, offering valuable insights into the design and control of electrically activated energy conversion systems.
20 October 2026 in Aerospace Science and Technology