SiOx thin films were prepared using magnetron sputtering with different O2 flow rates on a silicon substrate. The samples were characterized using Fourier transform infrared spectroscopy in transmission and reflection, covering a spectral range of 5 to 25 μm. By employing a multilayer model, the values of the complex refractive index that best fit the experimental transmission and reflection results were optimized using the Brendel–Bormann oscillator model. The results demonstrate the significance of selecting an appropriate range of O2 flow rates to modify the SiOx stoichiometry, as well as how the refractive index values can be altered between those of Si and SiO2 in the mid-infrared range.
11 October 2023 in Solar Energy Materials and Solar Cells
This research sought to determine the optimal conditions for depositing thin silver layers in the fabrication of low-emissivity coatings. The study utilized an in-line semi-industrial high-vacuum magnetron sputtering system with rectangular targets, closely resembling those used in industrial settings. Trilayer AZO/Ag/AZO structures were deposited to enhance the wetting properties of the silver, and to protect it from the atmosphere. The effects of the power and argon flow on the sample properties were analyzed, along with variations in the silver thickness. The results demonstrate that a lower power (200 W) and higher argon flows (1000 sccm) lead to a higher transmittance and a lower sheet resistance, resulting in a reduced emissivity (up to 0.015 for 24 nm of silver). The identified optimal conditions offer valuable recommendations for producing more efficient and optically superior coatings. This study also reveals the importance of the silver thickness to the properties of the coatings, in accordance with previous research findings. These findings provide insights for improving the performance of low-emissivity coatings in various applications.
17 July 2026 in Jornada de Jóvenes Investigadores del I3A
En este trabajo se desarrolla una plataforma experimental de transmisión y recepción óptica de señales PAM-4 destinada a la evaluación de algoritmos de procesado digital de señal (DSP) para sistemas de comunicaciones ópticas de alta velocidad, con vistas a futuras implementaciones hardware en tiempo real basadas en ASICs.
We present a straightforward and effective post-fabrication compensation method to achieve polarization-independent coherent detection in photonic integrated circuits (PICs). The approach exploits the adjustment of the local oscillator (LO) state of polarization (SOP), combined with thermal tuning of an integrated polarization beam splitter (PBS), to compensate for fabrication-induced polarization sensitiveness. A compact analytical model is developed, based on the measured TE and TM PIC responses to the signal and the LO, to identify the optimal PBS operating point and LO SOP that minimize the beat-power variation to the signal SOP. Experimental results confirm the predicted trends, showing that the receiver sensitivity variation across different signal polarizations is reduced from 8 dB to 3 dB for a BER of 10-2. This technique reduces performance variability in integrated coherent receivers due to fabrication tolerances, enabling the recovery of PICs that would otherwise be discarded. Its simplicity and generality make it applicable to a wide range of coherent integrated receiver architectures, and compatible with existing component-level tuning strategies.
28 July 2025 in Jornada de Jóvenes Investigadores del I3A
En este trabajo presentamos un nuevo método basado en el ajuste del estado de polarización del oscilador local de un receptor coherente integrado para compensar los errores de fabricación y hacerlo insensible a la polarización de la señal de entrada.