Outdoor thermal comfort is an important criterion for evaluating the quality of outdoor activity environments and is also a significant indicator for assessing sustainable building design. Over the past century, more than 165 indoor and outdoor thermal comfort indexes have been developed to define human thermal comfort conditions under various circumstances and to quantify indoor and outdoor thermal environmental conditions. However, in the process of outdoor thermal comfort indicators becoming widely used worldwide, it remains a pressing research issue to compare the current state of application in China and other countries, identify the key areas of application for both sides, and outline the trends in outdoor thermal comfort index application. This study analyzed 346 articles on outdoor thermal comfort indicators. Employing bibliometric methods, we outline the general landscape of outdoor thermal comfort index applications in China and other countries. Additionally, we utilize comparative analysis to uncover similarities and differences in the research focus on outdoor thermal comfort. The research findings indicate the following: (1) Compared to China, other countries started outdoor thermal comfort index application research earlier. Their papers have higher average citation counts and engage in close academic collaborations. However, the quantity of published papers is fewer than in China. (2) The top five frequently used indexes in both China and other countries are PET (including mPET), UTCI, PMV, SET* (including OUT_SET*), and THI (including DI). China tends to use PET and UTCI more frequently than other countries. (3) The potential future directions for outdoor thermal comfort index applications in both China and other countries include: “monitoring and controlling regional outdoor thermal comfort at the temporal and spatial scales”, “multi-factors coupling effects on outdoor thermal comfort”, “human health assessment and prediction based on outdoor thermal comfort”, and “utilizing computational algorithms to calculate outdoor thermal comfort”. This study can serve as a reference for researchers and designers in the industry, contributing to the creation of sustainable outdoor environments.
18 November 2024 in Construction and Building Materials
The use of slag silicate cement mortar as a thermal mass layer for radiant floor heating systems holds significant potential for active thermal energy storage systems in buildings. The main objective of this article is to experimentally test the thermal performance of slag silicate cement mortar thermal storage blocks after the addition of phase change materials. The present study focuses on investigating the thermal performance of thermal storage blocks made of slag silicate cement mortar that incorporates a microencapsulated phase change material (mPCM). The mPCM consists of particles of paraffin-coated resin, which are uniformly distributed in the mortar. The analysis revealed that the introduction of mPCM particles into the mortar decreases the bulk density by approximately 9.4% for every 5% increase in mPCM particles ranging from 0% to 20%. The results obtained utilizing the Hot Disk characterization method demonstrate that the mPCM particles significantly affect the thermal properties of the mortar. Particularly, the thermal conductivity and thermal diffusion coefficient of the SSC30 mortar with a 17.31 wt.% mass of mPCM particles decreased by 59% and 69%, respectively. The results of this study provide a basis for the application of RFHS end-use thermal storage layers.
Universities in severely cold regions face the dual challenge of adapting to seasonal climate variations while enhancing outdoor thermal comfort in outdoor leisure plazas. This study takes a university in Hohhot as a case study. Through field investigations conducted in summer and winter, thermal benchmarks were established. Based on this, an orthogonal experimental design was developed considering greenery layout, plant types, and surface albedo. ENVI-met was used to simulate and analyze the seasonal regulatory effects of landscape elements on the microclimate. The results show that: (1) the lower limit of the neutral PET range in Hohhot in winter is −11.3 °C, and the upper limit in summer is 31.3 °C; (2) the seasonal contribution of landscape elements to PET ranks as follows: plant types > greenery layout > surface albedo; and (3) the proposed optimization plan achieved a weighted increase of 6.0% in the proportion of activity area within the neutral PET range in both summer and winter. This study is the first to construct outdoor thermal sensation categories for both summer and winter in Hohhot and to establish a thermal comfort optimization evaluation mechanism that considers both diurnal and seasonal weightings. It systematically reveals the comprehensive regulatory effects of landscape elements on the thermal environment in severely cold regions and provides a nature-based solution for the climate-responsive design of campus plazas in such areas.
The increasing demand for special education in architectural design highlights the urgent need to ensure the safe evacuation of students with intellectual disabilities. However, current research on classroom evacuation for these students remains limited, particularly concerning critical factors, such as the number, location, and distance of exits. This study investigated the impact of dependent behavior on classroom exit design for students with intellectual disabilities by developing a Cellular Automaton (CA) model based on their behavioral characteristics. Simulated evacuation scenarios, considering and disregarding dependent behaviors, were analyzed to assess their effects on the number and positioning of exits, and a predictive model was implemented to establish the relationship between exit spacing and evacuation time. The results indicated that the dependent behavior significantly reduced evacuation efficiency and substantially affected classroom exit design. Considering the dependent behavior, this study demonstrated that setting two exits reduced the average evacuation time for students with intellectual disabilities by 12.99%, with further reductions achieved by placing the exits at the rear rather than at the sides or front of the classroom. The research also revealed that under the influence of dependent behavior, the average evacuation time initially decreased and then increased as the distance between exits increased. As one of the few studies addressing evacuation issues for students and the first to incorporate dependent behavior into the evacuation model, this study provides valuable recommendations for classroom designs that balance evacuation safety and daily usability. It offers essential data to inform architectural designs for classrooms serving students with intellectual disabilities and serves as a reference for future educational building design standards and regulations.
24 February 2025 in International Journal of Biometeorology