The Laoyingqing Pb–Zn deposit is located on the southwestern margin of the Yangtze block and on the east side of the Xiaojiang deep fault in the Sichuan–Yunnan–Guizhou Pb–Zn metallogenic triangle area (SYGT). This deposit was first discovered in the silty and carbonaceous slate of the Middle Proterozoic Kunyang Group that is structurally controlled by thrust faults and anticlines. This study is aimed at investigating whether the Laoyingqing deposit has the same ore-forming age and type as other Pb–Zn deposits related to the Pb–Zn metallogenic system and prospecting prediction of the deep and peripheral areas of the deposits in the SYGT. Based on the sphalerite Rb–Sr age dating and S–Sr–Pb isotopic composition analysis of the Laoyingqing Pb–Zn deposit, the following results were obtained. First, the Rb–Sr isochron age of sphalerite is million years (Ma), consistent with the ages of most Pb–Zn deposits in the SYGT (approximately 200Ma), thereby potentially indicating that these Pb–Zn deposits may have been formed synchronously during the late Indosinian orogeny. Second, the Pb isotopic compositions of sulfides show a linear trend on the average crustal Pb evolution curve in ²⁰⁷Pb/²⁰⁴Pb vs. ²⁰⁶Pb/²⁰⁴Pb plot. In addition, Pb isotopic ratios were consistent with the age-corrected Pb isotopic ratios of basement rocks, consequently suggesting that the source of mixed crustal Pb is mainly derived from basement rocks. Combined with the initial ⁸⁷Sr/⁸⁶Sr ratios of sphalerite between the (⁸⁷Sr/⁸⁶Sr)_200Ma value of the basement rocks and that of the Upper Sinian–Permian carbonates, it can be concluded that the ore-forming metals were mainly derived from basement rocks. Third, sulfur isotopic composition of sphalerite from the Laoyingqing deposits shows δ³⁴S_CDT values that range mainly from -2.62‰ to 1.42‰, which is evidently lower than the δ³⁴S_CDT values of sulfides (8–20‰) from other Pb–Zn deposits in the SYGT. This can be interpreted as a result of mixing with reduced S that was mainly derived from the thermochemically reduced S in the overlying strata and a small amount of reduced S produced by the pyrolysis of S-containing organic matter. We conclude that the Laoyingqing deposit and most of the Pb–Zn deposits in the SYGT are Mississippi Valley-type deposits, thereby providing new ideas for investigating the deep and peripheral areas of Pb–Zn deposits.

The Dahongshan large-scale iron (Fe)–copper (Cu) polymetallic deposit is in the Proterozoic metallogenic domain on the western margin of the Yangtze Block. It is a typical representative of Fe-Cu polymetallic composite mineralization in the Kangdian area. The deposit comprises a group of layered orebodies formed by volcanic exhalation sedimentation and metamorphism, and a group of vein-like orebodies formed by hydrothermal superposition. The large-scale mapping of altered lithofacies in the deposit has resolved issues of weak links and unclear mineralization and alteration zoning of hydrothermal superimposed deposits within the study area. The mineralization type, hydrothermal alteration type and intensity, mineral assemblage, and mineral structure of the vein-type Cu polymetallic deposits during the hydrothermal superposition period are meticulously analyzed and studied. Finally, the zoning relationships of vein orebodies (mineralization) are summarized. On the basis of the results of the study of the distribution pattern of this mineral body, a mineralization alteration zoning model of the hydrothermal superposition period is constructed. The results show that the alteration is primarily silicification, carbonation, and chloritization, and the mineralization is chalcopyrite, bornite, chalcocite, and pyrite. The Dibadu anticline and the cutting layer faults and fractures strictly control the hydrothermal alteration zoning. The mineralization alteration zoning from the core to the flank is divided into coarse vein zone (I) → stockwork zone (II) → veinlet zone (III). The corresponding mineral assemblages are quartz–calcite–chalcocite–bornite–(native copper) (I) → calcite–dolomite–quartz–bornite–chalcopyrite–chlorite (II) → dolomite–quartz–chalcopyrite–(pyrite) (III), where the stockwork zone has the most substantial mineralization. The mineral assemblages of each alteration zone, the characteristics of rare earth elements of typical samples, and the test results on the fluid inclusions confirm that pH and Eh primarily control the zoning mechanism. This study has significance for deepening the understanding of the composite metallogenic system, guiding deep and peripheral prospecting, and providing significant enlightenment for the study of this type of deposit.

The Maliping large-scale Pb-Zn deposit is located in the Sichuan-Yunnan-Guizhou Pb-Zn polymetallic metallogenic triangle area (SYGT), where the Pb-Zn ore body is hosted in the interlayer fracture zone at the interface between siliceous cataclastic dolomite and clastic rocks in the Lower Cambrian Yuhucun Formation and is tectonically driven. Unlike other Pb-Zn deposits hosted in the Sinian and Carboniferous carbonate rocks in the area, the metallogenic mechanism and deep and peripheral ore prospecting prediction research require further exploration. In this study, representative samples of a typical orebody profile were systematically collected, and microthermometry of fluid inclusions and H-O isotopes and metal sulfide trace element analyses were performed. The main findings were as follows: (1) The fluid inclusion study showed that the ore-forming fluids have vapor-rich phase reduction characteristics of medium-low temperature, salinity, and density. (2) H-O isotopic studies showed that the ore-forming fluids are derived from the mixing of deep-source fluids flowing through the deep fold basement (Kunyang Group) and organic containing basin brine. (3) Rare earth element (REE) characteristics indicate that the ore-forming materials were primarily derived from the folded basement (Kunyang Group). (4) The trace element study showed that sphalerite is relatively enriched in Cu, Cd, Ga, and Ge, while depleted in Fe, Mn, Sn, and Co, similar to the typical Huize-type (HZT) Pb-Zn deposit in the area. Therefore, it is suitable to explore the deposit using a large-scale “four step style” ore prospecting method for ore prospecting and prediction. Moreover, the results provide a reference for the study of Pb-Zn metallogenic systems and new ideas for the deep and peripheral prospecting of Pb-Zn deposits in this area.

The Dahai Pb-Zn mining area is located in the northwestern Pb-Zn district in northeastern Yunnan Province in the Sichuan-Yunnan-Guizhou Pb-Zn metallogenic triangle (SYGT), east of the Xiaojiang fault. Numerous Pb-Zn deposits (spots) occur in clastic rocks in this area. In this study, the Maliping, Laoyingqing, and Jinniuchang Pb-Zn deposits, representative clastic rocks in the Dahai mining area, were selected as research objects. The results of H-O-S-Sr-Pb isotope analyses show that the three deposits mainly formed through the mixing of a basinal brine with a hydrothermal fluid derived from deep within the underlying (deformed) basement, and brines leached organic matter from wall rocks. The δ³⁴S values range from −2.62–30.30‰. The S isotope results show two different sources of reduced S: one in the Laoyingqing deposit derived from the S reduction generated by the pyrolysis of sulfur-bearing organic matter in the carbonaceous slate of the Kunyang Group, and the second in the Maliping and Jinniuchang deposits derived from the S reduction generated by the thermochemical sulfur reduction (TSR) of seawater sulfate in the Lower Cambrian Yuhucun Formation and Sinian Dengying Formation. The Pb isotope results show that the Pb sources of the three deposits are derived from basement rocks (Kunyang Group) with a small portion derived from Devonian–Permian carbonate rocks and Dengying Formation dolomite, both of which have undergone homogenization during mineralization. The Sr content varied from 0.09629 to 0.2523 × 10⁻⁶, and the study shows that the main source of Sr is a mixture of ore-forming fluid flowing through basement rocks (Kunyang Group) and through sedimentary cover. However, most of the Sr in the Maliping deposit is derived from marine carbonate, and in the Laoyingqing deposit, it is provided by basement rocks (Kunyang Group). Based on a comparative study of the deposits, the Pb-Zn deposits in the clastic rocks of the Dahai mining area and the SYGT belong to the same metallogenic system and were formed under the same metallogenic geological background. Finally, a unified metallogenic model of the two types of fluid migration and mixed mineralization of the Pb-Zn deposit in clastic rocks of the Dahai mining area is proposed. The metallogenic model provides a basis for the study of the Pb-Zn metallogenic system and guidance for deep and peripheral prospecting in this area.

The seepage performance of a rock mass mainly depends on the rock fractures developed in it. Numerical calculation method is a common method to study the permeability properties of fractures. Seepage in rock fractures is affected by various factors such as fracture aperture, roughness, and filling, among which aperture and roughness are the two most widely influenced factors. The Navier-Stokes (NS) equation can be solved directly for the seepage flow in rock fractures with good accuracy, but there are problems of large computational volume and slow solution speed. In this paper, the fracture aperture space data is substituted into the local cubic law as an aperture function to form a numerical calculation method for seepage in rough rock fractures, namely, the aperture function method (AFM). Comparing with the physical seepage experiments of rock fractures, the calculation results of AFM will produce a small amount of error under the low Reynolds number condition, but it can greatly improve the calculation efficiency. The high efficiency of calculation makes it possible to apply AFM to the calculation of large-scale 3D rough fracture network models. The pressure drop of fluid in the fracture has viscous pressure drop (VPD) and local pressure drop (LPD). VPD can be calculated using the AFM. After analyzing the results of solving the NS equation for fracture seepage, it is concluded that the LPD includes the pressure drop caused by area crowding in the recirculation zone (RZ), kinetic energy loss in the RZ, kinetic energy loss in the vortices, and other reasons.

The roughness correction factor ( C ) mentioned in the cubic law correction formula is a parameter that reflects the roughness characteristics. In this study, high precision three‐dimensional (3D) scanning was used to scan natural rock samples, and both analytical and numerical simulation methods were employed to investigate the size effect and anisotropy of the C . The results show that C exhibits both size effects and anisotropy. Through ellipse fitting analysis, it was found that the C can be expressed in tensor form. Based on this, a new method for representing the permeability tensor is proposed by combining the roughness correction tensor and the average aperture. By comparing experimental results from 3D printed models, traditional cubic law, corrected cubic law, and Navier–Stokes (N–S) equation simulations, it is demonstrated that the roughness correction tensor, in conjunction with the average aperture, can effectively quantify the permeability characteristics of complex rough fractures. This provides a new quantitative approach for single‐fracture flow studies.