The Maliping large-scale Pb-Zn deposit is located in the Sichuan-Yunnan-Guizhou Pb-Zn polymetallic metallogenic triangle area (SYGT), where the Pb-Zn ore body is hosted in the interlayer fracture zone at the interface between siliceous cataclastic dolomite and clastic rocks in the Lower Cambrian Yuhucun Formation and is tectonically driven. Unlike other Pb-Zn deposits hosted in the Sinian and Carboniferous carbonate rocks in the area, the metallogenic mechanism and deep and peripheral ore prospecting prediction research require further exploration. In this study, representative samples of a typical orebody profile were systematically collected, and microthermometry of fluid inclusions and H-O isotopes and metal sulfide trace element analyses were performed. The main findings were as follows: (1) The fluid inclusion study showed that the ore-forming fluids have vapor-rich phase reduction characteristics of medium-low temperature, salinity, and density. (2) H-O isotopic studies showed that the ore-forming fluids are derived from the mixing of deep-source fluids flowing through the deep fold basement (Kunyang Group) and organic containing basin brine. (3) Rare earth element (REE) characteristics indicate that the ore-forming materials were primarily derived from the folded basement (Kunyang Group). (4) The trace element study showed that sphalerite is relatively enriched in Cu, Cd, Ga, and Ge, while depleted in Fe, Mn, Sn, and Co, similar to the typical Huize-type (HZT) Pb-Zn deposit in the area. Therefore, it is suitable to explore the deposit using a large-scale “four step style” ore prospecting method for ore prospecting and prediction. Moreover, the results provide a reference for the study of Pb-Zn metallogenic systems and new ideas for the deep and peripheral prospecting of Pb-Zn deposits in this area.

The Dahai Pb-Zn mining area is located in the northwestern Pb-Zn district in northeastern Yunnan Province in the Sichuan-Yunnan-Guizhou Pb-Zn metallogenic triangle (SYGT), east of the Xiaojiang fault. Numerous Pb-Zn deposits (spots) occur in clastic rocks in this area. In this study, the Maliping, Laoyingqing, and Jinniuchang Pb-Zn deposits, representative clastic rocks in the Dahai mining area, were selected as research objects. The results of H-O-S-Sr-Pb isotope analyses show that the three deposits mainly formed through the mixing of a basinal brine with a hydrothermal fluid derived from deep within the underlying (deformed) basement, and brines leached organic matter from wall rocks. The δ³⁴S values range from −2.62–30.30‰. The S isotope results show two different sources of reduced S: one in the Laoyingqing deposit derived from the S reduction generated by the pyrolysis of sulfur-bearing organic matter in the carbonaceous slate of the Kunyang Group, and the second in the Maliping and Jinniuchang deposits derived from the S reduction generated by the thermochemical sulfur reduction (TSR) of seawater sulfate in the Lower Cambrian Yuhucun Formation and Sinian Dengying Formation. The Pb isotope results show that the Pb sources of the three deposits are derived from basement rocks (Kunyang Group) with a small portion derived from Devonian–Permian carbonate rocks and Dengying Formation dolomite, both of which have undergone homogenization during mineralization. The Sr content varied from 0.09629 to 0.2523 × 10⁻⁶, and the study shows that the main source of Sr is a mixture of ore-forming fluid flowing through basement rocks (Kunyang Group) and through sedimentary cover. However, most of the Sr in the Maliping deposit is derived from marine carbonate, and in the Laoyingqing deposit, it is provided by basement rocks (Kunyang Group). Based on a comparative study of the deposits, the Pb-Zn deposits in the clastic rocks of the Dahai mining area and the SYGT belong to the same metallogenic system and were formed under the same metallogenic geological background. Finally, a unified metallogenic model of the two types of fluid migration and mixed mineralization of the Pb-Zn deposit in clastic rocks of the Dahai mining area is proposed. The metallogenic model provides a basis for the study of the Pb-Zn metallogenic system and guidance for deep and peripheral prospecting in this area.

The Baoshan Terrane, as a passive continental margin during the subduction of the Paleo-Tethys Ocean and the lower plate during collision, exhibits a poorly understood magmatic history. This region is characterized by limited magmatic activity and scarce field outcrops, which has hindered a comprehensive understanding of its petrogenesis and geological evolution. This paper presents a chronological and geochemical study of two different types of syn-collisional granites identified in the Mengnuo and Muchang areas in the southern Baoshan Terrane. Our results show that the two types of granites are high-fractionated S-type granites in Bangdong pluton from Mengnuo (zircon U-Pb ages of 230.3 ± 1.4 Ma, 228.7 ± 1.6 Ma and 230.2 ± 1.1 Ma) and A-type granites in Muchang (zircon U-Pb ages of 232.3 ± 1.8 Ma), respectively. Their formation ages are close to the timing of collision, belonging to syn-collisional granites. The Mengnuo high-fractionated S-type granites have SiO₂ contents ranging from 75.15 to 77.78 wt.% with A/CNK of 1.14 to 5.09, and are strongly peraluminous, high-K calc-alkaline granites. They display negative zircon εHf(t) values (−7.72 to −12.32), indicating derivation from partial melting of ancient crustal materials followed by extensive fractional crystallization. In contrast, the Muchang A-type granites contain 73.26 to 76.41 wt.% SiO₂, exhibit low A/CNK ratios (0.92–1.46, average = 1.07), and high Zr + Nb + Ce + Y abundances (313.7 to 3000.3 ppm), characterizing them as weakly peraluminous A-type granites. Further classification reveals that the Muchang granites belong to A1-type granites with positive εHf(t) values (+4.01 to +8.46), indicating the involvement of mantle-derived materials in their magma sources. In this case, combined with results from relevant studies in the Changming-Menglian suture zone, we propose that the Late Triassic magmatism in the Baoshan Terrane was likely triggered by slab break-off during syn-collisional stage. Slab break-off might cause mantle upwelling, resulting in large-scale Lincang batholith and associated volcanic rocks in the upper plate as well as various magmatism activities (S-type and A-type felsic rocks and intraplate basalts) in the Baoshan Terrane.

The Mahuaping deposit is the largest Be-W-F deposit in the Jinshajiang–Ailaoshan metallogenic belt, Sanjiang region, SW China, with more than 72,700 t WO₃, 41700 t BeO and 2.3 Mt CaF₂. Despite recent studies, the ore-forming process of the Mahuaping deposit remains poorly understood, limiting further insight into its genesis. In this study, a new muscovite Rb-Sr age and elemental compositions of beryl have been reported to constrain the mineralization age and evolution of ore-forming fluids. Muscovite Rb-Sr isochron dating reveals the mineralization age of the Mahuaping Be-W-F deposit is 28.0 ± 1.5 Ma, indicating the formation of the Mahuaping deposit is probably related to the magmatism caused by the sinistral shearing of crust in the Oligocene. LA-ICP-MS elemental mapping and spot analysis suggest the mechanisms for the incorporation of trace elements into the beryl lattice primarily involve two substitution types: Be²⁺ ↔ Li⁺ + Na⁺/Cs⁺ in the crystal core, and Al³⁺ ↔ (Fe²⁺/Mg²⁺) + (Na⁺/Cs⁺/Rb⁺) occurring in both the core and rim. The enrichment of Fe²⁺ is responsible for the blue coloration observed in beryl. The compositional variation from core to rim in beryl crystal indicates the initial ore-forming fluid of the Mahuaping deposit is reducing and acidic, and dominantly originated from magmatic fluids derived from the highly evolved magma. During the evolution, in addition to the continuous mixing of meteoric water, due to pulsating exsolution, the magmatic fluids were also replenished into the ore-forming fluid, enhancing water/rock interaction.

The Laoyingqing zinc deposit is located in the Pb-Zn deposit concentration district in northeastern Yunnan, with a geotectonic location on the southwestern edge of the Yangtze block. This deposit occurs in the interlayer fracture zone of the Huangcaoling Formation slate in the Middle Proterozoic Kunyang Group. In this deposit, zinc is significantly enriched compared to lead, and the sulfur isotopic composition of sphalerite shows δ³⁴S_CDT close to negative values. These characteristics are different from the common Pb-Zn deposits that occur in Sinian and Carboniferous carbonate rocks in northeastern Yunnan. The genesis of this deposit and its similarities to and differences from other Pb-Zn deposits hosted in carbonate rocks in the Sichuan–Yunnan–Guizhou Pb-Zn metallogenic triangle area (SYGT) need further research. This article selects typical rock (ore) samples for fluid inclusion, trace element, and H–O isotope analyses. The results show that (1) the homogenization temperature of the fluid inclusions is 130~306.5 °C, the salinity is 7.17 wt%~20.67 wt% NaCleq, and the density of the ore-forming fluids is 0.86–1.07 g/cm³. Overall, these ore-forming fluids belong to medium–low-temperature, medium–low-salinity, and medium–low-density ore-forming fluids, and they have reducibility. The fluid pressure is 36.3~85.6 Mpa, and the mineralization depth is 1.34~3.17 km. (2) The ore-forming fluids mainly came from deep-source metamorphic water and basin brine containing organic matter. (3) The ore-forming materials mainly came from the surrounding rocks (Kunyang Group). (4) The trace element characteristics of this deposit are different from sedimentary-exhalative type, magmatic hydrothermal type, and skarn type of Pb-Zn deposits, and have little difference from MVT Pb-Zn deposits. Based on the comprehensive analysis, this deposit is classified as a medium–low-temperature hydrothermal vein-type zinc deposit unrelated to magmatic activity. This study extends the ore-bearing surrounding rocks of Pb-Zn deposits in the SYGT to the slate of the Kunyang Group, enriching the regional Pb-Zn deposit mineralization theory and providing new ideas for mineralization prediction.