This paper presents a novel technique for single slope analog to digital converter (SSADC) to suppress the row-wise noise in CMOS image sensor. A sample switch is used in the current-steering DAC to reduce the noise introduced by bias circuits, which will deteriorate the characteristic of uniformity in the row direction. The sample switch can fix the voltage which biases the current source in the current-steering DAC when generating a ramp to avoid the ramp fluctuation in the time domain. The digital correlated double sampling is used to reduce the non-uniformity in column-level ADCs. The CMOS image sensor prototype is fabricated in 110nm 1P3M process. The 10-bit SSADC achieves DNL of -0.20 / +0.15 LSB and INL of -1.35 / +0.91 LSB at a sampling frequency of 29.2 KHz. It is proved that the row-wise noise is reduced from 764μ Vrms to 163μ Vrms at a frame rate of 228 fps using the proposed sample switch structure. The prototype photos taken by the sensor show that the row-wise noise is reduced under the low-illumination circumstance effectively.
29 April 2022 in IEEE Journal of Solid-State Circuits
A reconfigurable injection-locked frequency multiplier (RE-ILFM) with both frequency $\times 2$ doubler mode (DM) and $\times 3$ tripler mode (TM) is proposed to increase both the operation frequency range and power efficiency. The proposed wideband RE-ILFM has common input and output ports by switching the working DM and TM without any calibration. For TM, harmonic suppression technology (HST) composed of notch filtering and transformer injection-coupling network is presented to optimize the harmonic rejection. For DM, an injection device composed of push-push pair operates in class-C to reduce power consumption and improve second-order harmonic current. Moreover, the concept of a dual core with multiple tanks is first introduced into ILFM, which can effectively improve the magnitude of output signal compared with traditional methods. The proposed RE-ILFM is designed and fabricated in a 55-nm CMOS process. The measurement results show that under a 0-dBm differential injection power, the RE-ILFM can achieve the bandwidth from 20.7 to 43.8 GHz, i.e., 71.6% with a good harmonic rejection of better than 27-dB using HST. From 22 to 30 GHz and 35.4 to 42 GHz for 28 and 39-GHz mm-wave fifth-generation bands, the RE-ILFM can achieve a differential output power of −5.9 to −14.06 dBm and −9.38 to −13.48 dBm with a low power consumption of 12 and 9.6 mW, respectively. The measured phase noise degradation is around 9.5 and 6 dB, which is close to the theoretical value.
Parameter estimation of Poisson-Gaussian signal-dependent random noise in the complementary metal-oxide semiconductor/charge-coupled device image sensor is a significant step in eliminating noise. The existing estimation algorithms, which are based on finding homogeneous regions, acquire the pair of the variances of noise and the intensities of every homogeneous region to fit the linear or piecewise linear curve and ascertain the noise parameters accordingly. In contrast to the existing algorithms, in this study, the Poisson noise samples of all homogeneous regions in every block image are pieced together to constitute a larger sample following the mixed Poisson noise distribution; then, the mean and variance of the mixed Poisson noise sample are deduced. Next, the mapping function among the noise parameters to be estimated—variance of Poisson-Gaussian noise and that of Gaussian noise corresponding to the stitched region in every block image—is constructed. Finally, the unbiased estimations of noise parameters are calculated from the mapping functions of all the image blocks. The experimental results confirm that the proposed method can obtain lower mean absolute error values of estimated noise parameters than the conventional ones.
A 12-bit high-speed column-parallel two-step single-slope (SS) analog-to-digital converter (ADC) for CMOS image sensors is proposed. The proposed ADC employs a single ramp voltage and multiple reference voltages, and the conversion is divided into coarse phase and fine phase to improve the conversion rate. An error calibration scheme is proposed to correct errors caused by offsets among the reference voltages. The digital-to-analog converter (DAC) used for the ramp generator is based on the split-capacitor array with an attenuation capacitor. Analysis of the DAC’s linearity performance versus capacitor mismatch and parasitic capacitance is presented. A prototype 1024 × 32 Time Delay Integration (TDI) CMOS image sensor with the proposed ADC architecture has been fabricated in a standard 0.18 μm CMOS process. The proposed ADC has average power consumption of 128 μW and a conventional rate 6 times higher than the conventional SS ADC. A high-quality image, captured at the line rate of 15.5 k lines/s, shows that the proposed ADC is suitable for high-speed CMOS image sensors.