Kaiming Nie

Dr. Kaiming Nie


Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 March 2020 in IEEE Transactions on Circuits and Systems I: Regular Papers
Verified
Journal Article
Closed access
Kaiming NieKaiming Nie
Kaiming Nie
WZWanbin Zha
Wanbin Zha
XSXiaolin Shi
Xiaolin Shi
JLJiawen Li
Jiawen Li
JXJiangtao Xu
Jiangtao Xu
JMJianguo Ma
Jianguo Ma
This paper presents a novel technique for single slope analog to digital converter (SSADC) to suppress the row-wise noise in CMOS image sensor. A sample switch is used in the current-steering DAC to reduce the noise introduced by bias circuits, which will deteriorate the characteristic of uniformity in the row direction. The sample switch can fix the voltage which biases the current source in the current-steering DAC when generating a ramp to avoid the ramp fluctuation in the time domain. The digital correlated double sampling is used to reduce the non-uniformity in column-level ADCs. The CMOS image sensor prototype is fabricated in 110nm 1P3M process. The 10-bit SSADC achieves DNL of -0.20 / +0.15 LSB and INL of -1.35 / +0.91 LSB at a sampling frequency of 29.2 KHz. It is proved that the row-wise noise is reduced from 764μ Vrms to 163μ Vrms at a frame rate of 228 fps using the proposed sample switch structure. The prototype photos taken by the sensor show that the row-wise noise is reduced under the low-illumination circumstance effectively.

30 March 2023 in Microelectronics Journal
Verified
Journal Article
Closed access
GWGaoyuan Wang
Gaoyuan Wang
QCQuanmin Chen
Quanmin Chen
JXJiangtao Xu
Jiangtao Xu
Kaiming NieKaiming Nie
Kaiming Nie

17 November 2014 in Sensors
Verified
Journal Article
Open access
PDF file
TLTao Lyu
Tao Lyu
SYSuying Yao
Suying Yao
Kaiming NieKaiming Nie
Kaiming Nie
JXJiangtao Xu
Jiangtao Xu
A 12-bit high-speed column-parallel two-step single-slope (SS) analog-to-digital converter (ADC) for CMOS image sensors is proposed. The proposed ADC employs a single ramp voltage and multiple reference voltages, and the conversion is divided into coarse phase and fine phase to improve the conversion rate. An error calibration scheme is proposed to correct errors caused by offsets among the reference voltages. The digital-to-analog converter (DAC) used for the ramp generator is based on the split-capacitor array with an attenuation capacitor. Analysis of the DAC’s linearity performance versus capacitor mismatch and parasitic capacitance is presented. A prototype 1024 × 32 Time Delay Integration (TDI) CMOS image sensor with the proposed ADC architecture has been fabricated in a standard 0.18 μm CMOS process. The proposed ADC has average power consumption of 128 μW and a conventional rate 6 times higher than the conventional SS ADC. A high-quality image, captured at the line rate of 15.5 k lines/s, shows that the proposed ADC is suitable for high-speed CMOS image sensors.

16 September 2015 in Sensors
Verified
Journal Article
Open access
PDF file
ZLZhenwang Liu
Zhenwang Liu
JXJiangtao Xu
Jiangtao Xu
XWXinlei Wang
Xinlei Wang
Kaiming NieKaiming Nie
Kaiming Nie
WJWeimin Jin
Weimin Jin
In order to eliminate the fixed-pattern noise (FPN) in the output image of time-delay-integration CMOS image sensor (TDI-CIS), a FPN correction method based on gray value compensation is proposed. One hundred images are first captured under uniform illumination. Then, row FPN (RFPN) and column FPN (CFPN) are estimated based on the row-mean vector and column-mean vector of all collected images, respectively. Finally, RFPN are corrected by adding the estimated RFPN gray value to the original gray values of pixels in the corresponding row, and CFPN are corrected by subtracting the estimated CFPN gray value from the original gray values of pixels in the corresponding column. Experimental results based on a 128-stage TDI-CIS show that, after correcting the FPN in the image captured under uniform illumination with the proposed method, the standard-deviation of row-mean vector decreases from 5.6798 to 0.4214 LSB, and the standard-deviation of column-mean vector decreases from 15.2080 to 13.4623 LSB. Both kinds of FPN in the real images captured by TDI-CIS are eliminated effectively with the proposed method.

2 December 2018 in Sensors
Verified
Journal Article
Open access
PDF file
JGJing Gao
Jing Gao
YWYanzhao Wang
Yanzhao Wang
Kaiming NieKaiming Nie
Kaiming Nie
ZGZhiyuan Gao
Zhiyuan Gao
JXJiangtao Xu
Jiangtao Xu
In this paper, the non-ideal factors, which include spatial noise and temporal noise, are analyzed and suppressed in the high-speed spike-based image sensor, which combines the high-speed scanning sequential format with the method that uses the interspike time interval to indicate the scene information. In this imager, spatial noise contains device mismatch, which results in photo response non-uniformity (PRNU) and the non-uniformity of dark current. By multiplying the measured coefficient matrix the photo response non-uniformity is suppressed, and the non-uniformity of dark current is suppressed by correcting the interspike time interval based on the time interval of dark current. The temporal noise is composed of the shot noise and thermal noise. This kind of noise can be eliminated when using the spike frequency to restore the image. The experimental results show that, based on the spike frequency method, the standard deviation of the image decreases from 18.4792 to 0.5683 in the uniform bright light by using the calibration algorithm. While in the relatively uniform dark condition, the standard deviation decreases from 1.5812 to 0.4516. Based on interspike time interval method, because of time mismatch and temporal noise, the standard deviation of the image changes from 27.4252 to 27.4977 in the uniform bright light by using the calibration algorithm. While in the uniform dark condition, the standard deviation decreases from 2.361 to 0.3678.

29 October 2020 in IEEE Transactions on Circuits and Systems for Video Technology
Verified
Journal Article
Closed access
JXJiangtao Xu
Jiangtao Xu
LXLiang Xu
Liang Xu
ZGZhiyuan Gao
Zhiyuan Gao
PLPeng Lin
Peng Lin
Kaiming NieKaiming Nie
Kaiming Nie
In order to eliminate the noise on the pulse interval of high-speed spike-based image sensor, a pulse interval compensation (PIC) algorithm is proposed. Based on the analysis of the principle of sensor noise generation, a pulse interval error model is constructed and the compensation algorithm is developed. First, raw pulse data is obtained from the sensor system, and then the coefficient matrix is used to compensate the non-uniform pulse interval caused by the dark current. Then, the guided filter separates high-frequency noise from scenes details and the pulse interval compensation matrix is obtained in the corresponding pulse interval. Finally, the pulse interval compensation is performed on the raw pulse data for correction. In static scene experiments, the proposed method is compared with the existing state-of-the-art methods and shows a clear advantage in denoising in both low texture and rich texture scenes. In the experiment to film a turntable at a rotation speed of 2000 r/min, 3000 r/min, 6000 r/min, the average roughness decreases from 0.2830 to 0.2034, 0.2937 to 0.2139 and 0.3252 to 0.2501 respectively. These experiments proved that the proposed method can effectively eliminate the noise of the spike-based image sensor.