The paper presents the morphology, topography and corrosion behavior of epoxy resin/zinc hybrid coatings obtained by electrodeposition from zinc sulphate electrolyte. The effect of current density and mean diameter size of polymer particles used for electrodeposition of the epoxy resin/zinc coatings on the morphology, topography and roughness of the surfaces were investigated by Scanning Electron Microscopy and Atomic Force Microscopy. The corrosion behavior of the hybrid coatings in 0.5 M sodium chloride solution was evaluated using electrochemical methods. For microbiological corrosion, the effect of sulphate reducing bacteria (SRB) on the surfaces was evaluated using epifluorescence microscopy. The surface roughness before and after bacteria attachment was evaluated using Atomic force microscopy. Polymer particles provide an influence in restricting the growth of zinc crystals as well as a catalytic role in nucleation sites increase. The results of electrochemical tests indicate a very good corrosion resistance of hybrid coatings comparing with zinc coatings. Epifluorescence images demonstrate that hybrid coating surfaces are slightly attacked by sulphate reducing bacteria.
15 June 2021 in The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science
In this paper the corrosion behavior of different materials has been evaluated based on exposure in seawater. The laboratory immersion test technique has been applied to evaluate the effect of seawater on the corrosion behavior of different materials. In three sets of experiments, carbon steels (A681 Type O7), austenitic stainless steels (316L) and aluminium alloys (Al5083) were utilized. The specimens were fixed fully submerged in seawater. The corrosion process was evaluated using weight loss method, open-circuit potential measurements (OCP) and polarization techniques. To determine gravimetric index and the rate of penetration, samples were immersed in corrosive environment for 89 days and weighed periodically. The electrochemical experiments were conducted with a Potentiostat/Galvanostat (PGP 201) analyzer. It was connected to a PC. The Voltamaster software was used for electrochemical data analysis. A three-electrode cell composed of a specimen as a working electrode, Pt as counter electrode, and saturated calomel electrode (SCE) (Hg (l)/ Hg2Cl2 (s)) as a reference electrode were used for the tests. The weight loss tests revealed the lowest corrosion rate values for stainless steel and aluminium alloys, indicating a beneficial use for these materials in marine environments. The potentiodynamic method shows that the lowest corrosion rate in seawater (2.8 μm /year) was obtained for the Al5083 alloy, and the highest value of the corrosion rate (41.67 μm/year) for A681 carbon steel.
15 December 2023 in The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science
The study aims to evaluate the corrosion behaviour of two steels: BL245 and S235JR, produced at Liberty Steel Galati. BL245 is an alloy used in the oil and gas industry to manufacture pipes for pipeline transportation systems. S235JR is used to make hot finished hollow sections for construction. Gasoline, diesel and a 3.5% sodium chloride solution were chosen as corrosion environments for this study, considering the field of use of the two alloys (oil and construction). Corrosion assessment was analysed using the gravimetric method, which is based on weighing the samples before and after they were immersed for 7, 14, and 35 days in the above-mentioned corrosion environments. Based on the initial weighing and those recorded after the immersion periods, the mass variation of the samples was determined, and the corrosion rate and penetration index were calculated.
15 December 2024 in The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science
Soil quality is now thought of in a way that emphasises functionality in a broad context, involving soil not only as an environment for crop production but also as an important reservoir for water storage, as a buffer for filtering, transforming, and neutralising pollutants, and as a habitat for plants and animals. Some attributes (pH, soil conductivity, etc.) can be associated with several easily identified threats to soil quality, some of which are interrelated in the same way. For the present work, laboratory analyses were carried out to determine the physico-chemical parameters of soil from different areas. For soil quality analysis, the following parameters were determined: pH, conductivity, acidity, alkalinity, total nitrogen, aluminium, phosphates, iron, heavy metals, calcium, and magnesium content in the soil.
Y2O3 nanoparticles were used in a polyethersulfone (PES) as additives to increase the permeation properties of the polymeric membranes. Membranes were manufactured by diffusion-induced phase inversion in N-methyl-pyrrolidone (NMP) using a different concentration of nanoparticles. Y2O3 is used in polymeric membranes to enhance their functional properties, especially in wastewater treatment processes. Incorporating Y2O3 nanoparticles into the polymer matrix improves the membrane’s hydrophilicity, permeability, and mechanical strength. Additionally, Y2O3 provides better properties and reduces fouling. Recent studies highlight its potential as a modifying agent for advanced composite membranes. This paper investigated challenges in the synthesis of Y2O3-enhanced membranes and links synthesis with performance. It was observed that the composite membranes have better permeation properties by adding a small amount of Y2O3. For membranes at 21 wt.% PES permeability increase from 107 to 112 L/m2·h/bar. Fouling performance increases by adding nanoparticles, relative flux decreases by 30% for membranes without nanoparticles and by 10% for membranes with nanoparticles, both at a concentration of 25% PES. Rejection increases for membranes at 21%Pes from 21% for membranes without nanoparticles to 39% for membranes with nanoparticles. The influence of Y2O3 nanoparticles on the membranes’ performance was determined by filtration experiments to establish the permeability, fouling, retention, and the water flux; by contact angle to establish the surface hydrophilicity; and by SEM to investigate the membranes’ structures.
15 December 2022 in The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science
The quality of drinking water was investigated in two localities from Vaslui county (Bârlad and Văleni) by comparison with a sample from Galați county. A number of parameters such as pH, turbidity, conductivity, nitrates, nitrites, temporary hardness, dissolved oxygen were analysed for each water sample collected during the month of May. The obtained values of each parameter were compared with the standard values set by the local standards, Law no. 458/2002 regarding the quality of drinking water.