Muhammad Jawad

Dr. Muhammad Jawad

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 August 2021 in The International Journal of Advanced Manufacturing Technology
Verified
Journal Article
Open access
PDF file
HJHassan Javid
Hassan Javid
MJMirza Jahanzaib
Mirza Jahanzaib
MJMuhammad Jawad
Muhammad Jawad
Muhammad Asad AliMuhammad Asad Ali
Muhammad Asad Ali
MFMuhammad Umar Farooq
Muhammad Umar Farooq
SHSalman Hussain
Salman Hussain
The requirement of cost-effective and ecological production systems is crucial in the competitive market. In this regard, the focus is shifted towards sustainable and cleaner machining processes. Besides the clean technologies, effective parametric control is required for machining materials (such as High Strength Low Alloy Steels) specifically designed for high strength applications having superior physio-chemical properties. Therefore, the machinability complexities require optimized solutions to reduce temperature elevation and tooling costs and improve machining of these materials. Complying to the market needs, this research examines the effectiveness of nanofluid on tool life, wear mechanisms, surface roughness (Ra), surface morphology, and material removal rate (MRR) in turning of 30CrMnSiA (HSLA) using minimum quantity lubrication (MQL) and SiO2-H2O nanofluids (NF-MQL). A systematic investigation based on physical phenomena involved is carried out considering four process parameters (cutting speed (VC), feed rate (Fr), depth of cut (DOC), and mode of lubrication for machining. Fr is found as the vital parameter for surface roughness while MRR is highly influenced by DOC regardless of lubrication approach. One-step sustainability technique is applied, in which process variables used for roughing conditions are analogous to attain surface comparable to finished machining without compromising process efficiency and demonstrate its feasibility through optimal settings under NF-MQL. Multi-response optimization proved the NF-MQL machining condition as the best alternative which result in 28.34% and 5.09% improvements for surface roughness and MRR, respectively. Moreover, the use of SiO2 is recommended over MQL due to lower energy consumption, low tool wear, and better surface integrity, sustainable liquid, and related costs.

17 June 2019 in Materials
Verified
Journal Article
Open access
PDF file
KIKashif Ishfaq
Kashif Ishfaq
Naveed AhmedNaveed Ahmed
Naveed Ahmed
MJMuhammad Jawad
Muhammad Jawad
Muhammad Asad AliMuhammad Asad Ali
Muhammad Asad Ali
Abdulrahman Al-AhmariAbdulrahman Al-Ahmari
Abdulrahman Al-Ahmari
Stainless steel (SS 304) is commonly employed in industrial applications due to its considerable corrosion resistance, thermal resistance, and ductility. Most of its intended applications require the formation of complex profiles, which justify the use of wire electrical discharge machining (WEDM). However, its high thermal resistance imposes a limitation on acquiring adequate surface topography because of the high surface tension of the melt pool, which leads to the formation of spherical modules; ultimately, this compromises the surface quality. Furthermore, the stochastic nature of the process makes it difficult to optimize its performance, especially if more than one conflicting response is involved, such as high cutting speed with low surface roughness and kerf width. Therefore, this study aimed to comprehensively investigate the interaction of SS 304 and WEDM, with a prior focus on simultaneously optimizing all the conflicting responses using the Taguchi-based grey relational approach. Analysis of variance (ANOVA) revealed that the current was the most significant parameter for cutting speed and kerf, whereas roughness, voltage (45%), drum speed (25.8%), and nozzle offset distance (~21%) were major contributing factors. SEM micrographs showed that optimal settings not only ensured simultaneous optimization of the conflicting responses but also reduced the number and size of spherical modules.

13 April 2023 in IEEE Transactions on Engineering Management
Verified
Journal Article
Closed access
AAhmad Sajjad
Ahmad Sajjad
WAWasim Ahmad
Wasim Ahmad
SHSalman Hussain
Salman Hussain
BCBilal Akbar Chuddher
Bilal Akbar Chuddher
MSMuhammad Sajid
Muhammad Sajid
MJMuhammad Jawad
Muhammad Jawad
Developing countries are facing challenges to adopt the Industry 4.0 in their manufacturing sector. One of the reasons is lacking technological and maturity models’ compatibility to assess the current state of maturity and readiness level. This empirical research has presented a maturity model based on the IMPULS models developed by the German Association of Mechanical Engineers and the Singapore Smart Industry Readiness Index with some modifications. A comprehensive and compatible lean modified manufacturing maturity model for Industry 4.0 (LM4I4.0) has been developed and validated. The proposed model has add-on dimension of the lean philosophy. This modification provides the facility to integrate the two main manufacturing paradigms of lean and Industry 4.0. The developed LM4I4.0 has been validated in fifty manufacturing industries of Pakistan and results have been presented in the data analysis format. The data mining, dimension cluster analysis, and computation of data shows that the proposed model is compatible for the developing country. Moreover, the results and analysis show that the maturity level of Pakistani manufacturing is 3.39, which means companies are immature in context of Industry 4.0. The proposed methodology may be used to conduct self-evaluations and enable businesses to undertake self-assessments in order to align themselves with Industry 4.0 in a systematic way. It will, therefore, provide a direction to formulate the enterprise transformation strategies in Industry 4.0 paradigm.

1 October 2022 in Materials Research Express
Verified
Journal Article
Open access
MJMuhammad Jawad
Muhammad Jawad
MJMirza Jahanzaib
Mirza Jahanzaib
MIMuhammad Ilyas
Muhammad Ilyas
Products manufactured by joining titanium and stainless steel are of great attention to the modern-day industries (aerospace and nuclear) due to their several benefits like high strength, low cost, and corrosion resistance. However, it is difficult to join these alloys owing to the formation of TiFe, Ti2Fe, and TiFe2 compounds which damage their mechanical properties. This study aims to evaluate the microstructural and mechanical properties of titanium alloy Ti-5Al-2.5Sn and stainless steel 304 joints. Joining was performed through pulse–gas tungsten arc welding (P-GTAW) by inserting the Nb-Cu multi-interlayer. The effects of welding speed, two multi-interlayer application modes, and arc offset on the microstructure and mechanical properties such as tensile strength and microhardness were investigated. The mechanical properties were evaluated through tensile and hardness tests while microstructural analysis using scanning electron microscopy (SEM) supported by electron dispersive spectroscopy (EDS). The results revealed that sound and high-quality welds were achieved using a multi-interlayer, which inhibited the formation of TiFe, Ti2Fe, and TiFe2 brittle intermetallic compounds (IMCs). Maximum joint strength of 327 MPa was achieved at a welding speed of 200 mm min−1, mode of multi-interlayer (Nb used as a foil and Cu as a wire) at no arc offsetting, whereas a low joint strength was obtained in the multi-interlayer mode (Nb and Cu both as foils), and arc offset towards SS. The SEM and EDS results revealed that a Cu solid solution was obtained in the fusion zone, which improved the tensile strength. Joint fracture surface analysis indicated that ductile fracture was obtained for high-strength and brittle fracture for the low-strength weld. It is evident that high hardness (400 HV) was obtained at a low welding speed (150 mm min−1) and an arc offset to the stainless steel side owing to the formation of TiCu and Ti2Cu phases, as revealed by the x-ray diffraction phase analysis.

29 December 2023 in The International Journal of Advanced Manufacturing Technology
Verified
Journal Article
Closed access
PDF file
MJMuhammad Jawad
Muhammad Jawad
MJMirza Jahanzaib
Mirza Jahanzaib
Muhammad Asad AliMuhammad Asad Ali
Muhammad Asad Ali
SHSalman Hussain
Salman Hussain
WAWasim Ahmad
Wasim Ahmad
Naveed AhmedNaveed Ahmed
Naveed Ahmed

14 November 2024 in Journal of Materials Engineering and Performance
Verified
Journal Article
Closed access
PDF file
Muhammad Waqas HanifMuhammad Waqas Hanif
Muhammad Waqas Hanif
MSMuhammad Sajid
Muhammad Sajid
MJMuhammad Jawad
Muhammad Jawad
WAWasim Ahmad
Wasim Ahmad