In recent years, with the increasing requirements of machine performance, the traditional electrical machine structure and optimization methods are more and more difficult to meet the application needs. Aiming at solving the problem of high dimensional multi-objective nonlinear strong coupling optimization, it is necessary to study the efficient optimization method. In this paper, size optimization (SIO), shape optimization (SHO), and topology optimization (TPO) methods are compared and analyzed. Based on the above optimization methods, a combined topology-shape optimization (PTPO-NSHO) method is proposed and two boundary shape modeling methods are established and used in SHO and PTPO-NSHO, respectively. Four optimization methods including SIO, SHO, TPO, and PTPO-NSHO are employed to optimize the rotor flux barrier of synchronous reluctance machines (SynRM), and their optimization time and results are compared. It can be seen that the proposed PTPO-NSHO can make the SynRM with very good torque performance while acceptable optimization time is required.
12 September 2023 in Journal of Electrical Engineering & Technology
Permanent magnet motors have become an important component of industrial production, transportation, and aerospace due to their advantages of high torque density, high power density, high reliability, low losses, and high efficiency. Permanent magnet claw pole motor (PMCPM) is a special type of transverse flux motor which has a higher torque density compared to traditional permanent magnet motors. Due to the absence of winding ends, its axial space utilization is high, and the usage of windings is greatly reduced, reducing the cost and weight of the motor. PMCPM has the advantages of small space, a light weight, a high torque density, a high efficiency, and simple production, which have potential for use in the field of electric vehicles. The double-stator structure design can improve the torque density, efficiency, and radial space utilization of PMCPM, which helps to expand their applications in the field of electric vehicles. This article designs two PMCPM with concentrated winding while different rotor structures (PMCPM1 and PMCPM2) and a three-dimensional finite element method is employed to compare and analyze the performance of PMCPM1 and PMCPM2 and the traditional PMCPM (TPMCPM). Multiphysics analysis is carried out for PMCPM1 and PMCPM2. The stress of the inner and outer stators during interference assembly are analyzed. In this paper, a hybrid material core design is proposed, in which the stator yoke is rolled by silicon steel material and the stator claw pole is pressed by the SMC die method. The multiphysics simulation performance of the PMCPM1 and PMCPM2 with hybrid cores is analyzed.
Electrical machine optimisation is normally a high‐dimensional non‐linear multi‐objective optimisation problem. A multi‐level optimisation (MO) strategy is currently used to improve efficiency, where sensitivity analysis is required for dividing design parameters into different groups. However, the conventional MO strategy cannot handle ultra‐high‐dimensional optimisation problems. In this paper, a sensitivity analysis method with variable weighted intervals is proposed to calculate the sensitivity coefficient in the parameter design range. Moreover, three improved multi‐level optimisation strategies based on different optimisation algorithms, sequential sensitivity strategies, and machine learning models are proposed, analysed, and compared with the conventional MO strategy. Through a case study of a synchronous reluctance machine, it can be seen that the proposed optimisation strategies can improve the optimisation results and efficiency of ultra‐high‐dimensional optimisation of electrical machines.
25 March 2023 in Journal of Electrical Engineering & Technology