The article presents the results of experimental study on the effect of additives of silicon oxide nanoparticles, as well as single-walled and multi-walled carbon nanotubes on the colloidal stability and thermal degradation process of hydrocarbon-based drilling fluids. Such a comprehensive study of hydrocarbon-based drilling fluids was carried out for the first time. The effect of the concentration and size of silicon oxide nanoparticles, as well as the type and concentration of nanotubes on the colloidal stability of drilling fluids during thermal aging tests at different temperatures, was investigated. The nanoparticle size varied from 18 to 70 nm, and the concentration ranged from 0.25 to 2 wt.%. Single-walled and multi-walled nanotubes were studied, whose concentration varied from 0.01 to 0.5 wt.%. The thermal aging temperature varied from 30 to 150 °C. According to the results of the investigation, it was shown that the temperature stability of hydrocarbon-based drilling fluids can be significantly improved by adding the above substances. At the same time, it was shown that the use of single-walled nanotubes for thermal stabilization of drilling fluids was several times more effective than the use of multi-walled nanotubes, and tens of times more effective than the use of spherical silicon oxide nanoparticles.
The results of experimental studies of the microsuspensions filtration with silicon oxide nanoparticles additions through a porous medium with different permeability are presented. The particle concentration in fluids ranged from 0.25 to 4 wt.%. The microparticle size was 1.2 μm. The nanoparticle size was 5 nm. The nanoparticle concentration was 2 wt.%. Dependences of the filtration losses of microsuspensions on the microparticle concentration and the permeability of a porous medium were established.
1 October 2021 in Journal of Physics: Conference Series
A systematic study of the effect of nanoparticles of various concentrations and sizes on the rheological properties of various oil-based drilling fluids with nanoparticle additives has been carried out. The concentration of nanoparticles in drilling emulsions varied from 0.25 to 2 wt%, and the average size of nanoparticles ranged from 18 to 100 nm. As a result of numerous laboratory experiments, formulations and technology for the preparation of stable oil-based drilling fluids with additives of nanoparticles have been developed. The effect of nanoparticles on the viscosity and rheological properties of these drilling fluids has been studied.
1 November 2019 in Journal of Physics: Conference Series
This research is focused on the dependence of viscosity of water-based drilling fluid modified by nanoparticles on temperature. Silicon oxide of 10 nm size was used as nanoparticles. The nanosuspensions were prepared for nanoparticle concentrations from 0.25 to 3 wt%. An aqueous solution of bentonite with a mass fraction of 5 % was used as a base drilling fluid. Rheological studies were conducted at varying temperatures (25, 40, 55 and 80 °C). The dependences of the effective viscosity of these suspensions on the concentration of nanoparticles and temperature have been obtained.