Polymer coatings are widely used in industrial applications. The mechanical properties of these polymer coatings are known to vary with temperature and deformation rate. The characterization of the dynamic mechanical properties of these coatings at high temperatures via traditional uniaxial testing is challenging often due to their brittleness and small size. In this paper, the mechanical properties of polymer coatings are reported with emphasis on their dynamic mechanical properties at temperatures up to 280 °C characterized by a dynamic nanoindentation technique with a sharp indenter tip. Nanoindentation was used to characterize the mechanical response with emphasis on dynamic mechanical properties of polymer coatings enclosed in a high-temperature stage. To verify the method, the viscoelastic properties of a reference polyethylene terephthalate polyester film were also characterized by uniaxial cyclic tensile testing which exhibited an excellent agreement with the proposed technique. The proposed nanoindentation method can be applied to other polymer coatings and thin films that are used in applications at high temperatures.
Colorless polyimide (PI)-based flexible cover windows are a critical component of flexible electronics to protect devices from unwanted chemical and mechanical damage. The integration of flexible colorless PI-based windows into electronics applications is limited by the embrittlement of some colorless PI films when they are coated with hard coats. Here, we investigate the embrittlement mechanism of hard-coated colorless PI films and the role of interlayers in toughening the colorless PI-based cover windows for flexible electronics applications. A fracture mechanics approach combined with finite element analysis (FEA) models is employed to compute fracture strain, εc, for different crack cases in the bilayer (hard coated colorless PI) and trilayer (with an additional interlayer) cover windows. For the model inputs and validation, the material properties of the cover windows are characterized. We show that the embrittlement is attributed to the fracture behavior of the cover windows, and placing a ductile interlayer increases the εc of colorless PI films. Using the fracture analysis as a design guide, we fabricate a trilayer cover window with an acrylic thermoset interlayer and demonstrate an improvement of the εc of the colorless PI cover window by ~42%. We believe our analysis provides insights into design guides for mechanically robust cover windows using colorless PI films and flexible HCs for emerging flexible electronics.