By effectively utilizing the fidelity of a physical simulation and the flexibility of a numerical simulation, the hybrid simulation is applicable to test the complicated docking contact process of various kinds of spacecraft. However, the hybrid simulation of space docking often has a divergence or convergence distortion due to phase delays and structure dynamics in the system loops. In many cases, it is difficult to derive the loop models based on the first-principle for the compensator design. In this study, a learning-based distortion compensation method is proposed to compensate for the phase delays and structure dynamics existing in the simulator. The measurement system delay of the contact force is compensated by a learning-based force compensator (LFC). For the motion simulator, the delay of the actuation system of the lower platform is compensated by a learning-based actuation compensator (LAC), and the structure dynamics of the lower and upper platforms are compensated by a learning-based structure compensator (LSC). The proposed learning-based distortion compensation method does not require the system models. Some verifications show that the hybrid simulation error can be reduced and good accuracy can be achieved.
This article aims to address the in-orbit assembly needs of truss structures in space missions by designing a robot capable of moving on trusses and manipulating parts. To enhance the stability of the robot during movement and part manipulation, inspiration was drawn from the Dynastes Hercules beetle. Building upon detailed research on the Dynastes Hercules beetle, a biomimetic structure was designed for the robot system. Based on specific task requirements, the overall plan of the robot was developed, and its kinematic and dynamic models were derived. A prototype of the robot was created, which is capable of both movement and assembly functions, including handling spherical and rod-like objects. Through a series of experiments conducted with the robot, the research results demonstrated that the proposed design can effectively achieve the intended functions.
The aim of designing the wind turbine blades is to improve the power capture ability. Since the rotor control technology is currently limited to controlling the rotor rotational speed and the pitch of the blades, an increasing concern has been given to the morphing blades. In this paper, a simplified morphing blade is introduced, which has a linear twisted distribution along the span and its shape can be controlled by adjusting the root twisted angle and the tip twisted angle of the blade. Moreover, to evaluate the performances of the wind turbine blades, a numerical code based on the blade element momentum theory is developed and validated. The blade of the NREL Phase VI wind turbine is taken as a reference blade, and the optimization problems associated with the morphing blade and pitch control blade are both formulated. The optimal results show that the morphing blade gives better results than the pitch control blade in terms of produced power. Under the assumption that in a given site, the annual average wind speed is known and the wind speed follows the Rayleigh distribution, we can evaluate the annual energy produced by these three blade types. While the annual average wind speed varies from 5 m/s to 15 m/s, the results show that the optimal morphing blade can increase 23.9 percent to 71.4 percent in annual energy production while the optimal pitch control blade can increase 22.5 percent to 67.4 percent in annual energy production, over the existing twisted pitch fixed blade.
The docking mechanism is the key system for realizing the lunar-orbit docking mission of two spacecraft, which needs to have both capture correction and connection hold functions. The different stiffness requirements between the capture correction process, where low stiffness is desired, and the connection hold process, where high stiffness is desired, pose a significant challenge to the design of the docking mechanism. In this paper, an active capture claw docking mechanism is designed. Under the constraints of being lightweight and having an envelope size, three sets of independent claw mechanisms are designed using the modular design idea to achieve the performance optimization and function integration of the docking mechanisms. The theoretical model of the collision dynamics between the active and passive docking mechanisms is established; the stiffness value range of the docking mechanism is determined, and the typical docking conditions are simulated and verified. The results show that the stiffness design in this paper can satisfy the requirements of the two docking processes. The active capture claw docking mechanism developed was applied to the lunar surface sample return mission successfully and played an important role in the lunar-orbit docking mission.
In this paper, a pawl composite linkage transfer mechanism is designed for the automatic in-orbit sample transfer mission of Chang’E-5 lunar sample return mission, which can realize the sample container in-orbit transfer under various critical constraints such as lightweight, miniaturization, and narrow working space. Resistance during the whole process as well as the sensitive factors that affect the resistance during the sample container transfer process are investigated and designed. The sample container transfer process has been verified by the test system on the ground, indicating that the design can satisfy the requirements of the sample transfer mission. The developed transfer mechanism completed the Chang’E-5 sample return mission successfully with good consistency between space and ground, verifying the correctness and effectiveness of the design.