Vital sign monitoring plays a critical role in tracking the physiological state of people and enabling various health-related applications (e.g., recommending a change of lifestyle, examining the risk of diseases). Traditional approaches rely on hospitalization or body-attached instruments, which are costly and intrusive. However, in recent years there is an emergence of contact-less vital sign monitoring techniques that rely on radio frequency signals. Early studies with continuous wave radars/WiFi devices have shown good success in detecting the vital signs of a single individual, while simultaneous monitoring of the vital signs of multiple, closely spaced subjects remains a challenge. In this paper, using an off-the-shelf Texas Instrument automotive FMCW radar, we design and implement a time-division multiplexing (TDM) phased-MIMO radar sensing system that allows high-precision vital sign monitoring of multiple subjects. The proposed sensing system can steer the beam towards the desired directions with a micro-second delay. The steerable beam enables capturing the vital signs of multiple individuals at the same radial distance to the radar. The proposed system enables the formation of a virtual array with aperture longer than that of the physical array. A Capon beamformer is used at the receiver side to combine the data collected from different transmit and receive antenna pairs corresponding to the virtual array. As all those pairs provide independent information about the targets, their combination significantly boosts the receiver signal-to-noise ratio. Based on the designed TDM phased-MIMO radar, we develop a system to automatically localize multiple human subjects and estimate their vital signs. Extensive evaluations show that under two-subject scenarios, our system can achieve more than 98.06% accuracy for breathing rate (BR) and more than 82.89% accuracy for heartbeat rate (HR) estimation, at a subject-to-radar distance of $\text{1.6}\;m$ when the targets are facing the radar. The minimal subject-to-subject angle separation is $30^\circ $ at a subject-to-radar distance of $\text{1.6}\;m$ , corresponding to a close distance of $\text{0.3}\;m$ between two subjects, which outperforms the state-of-the-art.
14 May 2020 in IEEE Journal of Electromagnetics, RF and Microwaves in Medicine and Biology
In recent decades, wireless healthcare detection has been demonstrated to be an efficient method for monitoring the health condition of targets; it has involved the detection of motion and vital sign signals with minimal discomfort. Self-injection-locked (SIL) radar systems exhibit several useful advantages over conventional continuous-wave (CW) radar systems in healthcare applications, including a low system complexity, high sensitivity, and high clutter immunity. Several approaches to detecting vital sign signals and locations using SIL radar systems have been proposed. This paper summarizes developments in vital sign detection and localization. Finally, some results of detecting animals using SIL radar systems are presented.
15 August 2019 in IEEE Transactions on Microwave Theory and Techniques
A new architecture of self-injection-locked (SIL) quadrature radar sensor based on a metamaterial (MTM) leaky-wave antenna (LWA) to detect multi-target vital sign and location simultaneously is proposed for the first time. The angular information of targets is obtained by a 1-D MTM LWA with -50° to +30 ° beam-steering angle when the frequency varies from 1.85 to 2.85 GHz. Furthermore, the distance from the radar sensor to the targets is obtained by imposing the frequency-shift keying (FSK) modulation on the radar waveforms. Meanwhile, the vital sign signals of multiple targets can be extracted from the Doppler frequency spectrum. For the proof of concept, two frequencies, 2.24 and 2.45 GHz, are chosen to detect two targets at different locations, which correspond to the scanning angle at -10° and -40°, respectively. A first-order microwave differentiator followed by a quadrature coupler is employed to convert the radio frequency (RF) signals from the output of the MTM LWA to in-phase (I) and quadrature (Q) RF signals with frequency-dependent amplitudes, thereby eliminating the null point issues for radar detection. Experimental results show that the proposed SIL MTM radar sensor can detect the target location accurately, while the obtained vital sign results agree well with the ground truth.
11 September 2017 in IEEE Microwave and Wireless Components Letters
This letter introduces a novel type of non-Foster element using a microwave transversal-filter-based negative group delay (NGD) circuit that can exhibit unconditional stability. The proposed device is realized by a distributed amplifier, in which the NGD response is synthesized by adjusting the ratio of transconductance of transistors in each stage. On top of this, by properly amending the in-band magnitude and phase characteristics, the NGD circuit can realize non-Foster elements within the operating band. Furthermore, thanks to the distributed topology, the proposed network has very good input and output matching characteristics. As proof-of-concept, a prototype of the proposed non-Foster element is built to validate the proposed scheme. The experimental results show that the proposed circuit can realize a unilateral non-Foster element composed of a -1 pF shunt capacitor and a -1.25 nH series inductor.
17 March 2021 in IEEE Microwave and Wireless Components Letters
This work presents an on-chip Wilkinson power divider using silicon-based integrated passive device (IPD) technology that operates from 70 to 110 GHz, thereby covering the entire W-band (75-110 GHz). Based on a simple impedance transformation different from the conventional Wilkinson power divider topology, the proposed silicon IPD power divider with a core size of 0.417 mm 2 can demonstrate power loss of less than 1.1 dB along with input-output return loss better than 14 dB throughout the entire band.
Recent advancement in digital coding metasurfaces incorporating spatial and temporal modulation has enabled simultaneous control of electromagnetic (EM) waves in both space and frequency domains by manipulating incident EM waves in a transmissive or reflective fashion, resulting in time-reversal asymmetry. Here we show in theory and experiment that a digitally space-time-coded metamaterial (MTM) antenna with spatiotemporal modulation at its unit cell level can be regarded as a radiating counterpart of such digital metasurface, which will enable nonreciprocal EM wave transmission and reception via surface-to-leaky-wave transformation and harmonic frequency generation. Operating in the fast wave (radiation) region, the space-time-coded MTM antenna is tailored in a way such that the propagation constant of each programmable unit cell embedded with varactor diodes can toggle between positive and negative phases, which is done through providing digital sequences by using a field-programmable gate array (FPGA). Owing to the time-varying coding sequence, harmonic frequencies are generated with different main beam directions. Furthermore, the space time modulation of the digitally coded MTM antenna allows for nonreciprocal transmission and reception of EM waves by breaking the time-reversal symmetry, which may enable many applications, such as simultaneous transmitting and receiving, unidirectional transmission, radar sensing, and multiple-input and multiple-output (MIMO) beamformer.