11 September 2017 in IEEE Microwave and Wireless Components Letters
This letter introduces a novel type of non-Foster element using a microwave transversal-filter-based negative group delay (NGD) circuit that can exhibit unconditional stability. The proposed device is realized by a distributed amplifier, in which the NGD response is synthesized by adjusting the ratio of transconductance of transistors in each stage. On top of this, by properly amending the in-band magnitude and phase characteristics, the NGD circuit can realize non-Foster elements within the operating band. Furthermore, thanks to the distributed topology, the proposed network has very good input and output matching characteristics. As proof-of-concept, a prototype of the proposed non-Foster element is built to validate the proposed scheme. The experimental results show that the proposed circuit can realize a unilateral non-Foster element composed of a -1 pF shunt capacitor and a -1.25 nH series inductor.
22 May 2024 in IEEE Microwave and Wireless Technology Letters
In this letter, a bidirectional electro-thermal coupling (BETC) method is proposed to design high-efficiency terahertz (THz) frequency doubler. The effect of temperature on diode characteristics and metal conductivity is taken into consideration in circuit design. Moreover, the electromagnetic loss of the frequency doubler is reduced by multiple bidirectional coupling iterative optimization to improve conversion efficiency. For demonstration, a THz frequency doubler was designed with a balanced structure and assembled with a flip-chip configuration. Under the continuous wave (CW) mode excitation of 500 mW, a peak conversion efficiency of 13.2% is obtained at 200 GHz with output power of 66 mW, which further confirms the advancement of the BETC method.
1 November 2022 in IEEE Microwave and Wireless Technology Letters
This letter presents a wideband 6-bit digital attenuator with positive voltage driving capability. The designed attenuator solves the problem that traditional pseudomorphic high-electron-mobility transistor (pHEMT) attenuators need negative voltage control so that it can be better compatible with CMOS control signals. The frequency-select attenuation parallel (FSAP) network is utilized to improve high-frequency attenuation fluctuation and enable wideband flat attenuation characteristics. Simultaneously, this letter creatively proposed the lossy dc-block (LDB) network, which not only completes the dc blocking effect but also improves the low-frequency resonance in high attenuation state. The attenuator is implemented in the GaAs 0.25- $\mu$ m pHEMT process. It demonstrates a 31.5-dB attenuation range with an increment of 0.5 dB. In the range of 0.05–6 GHz, the measured results showed that the root-mean-square (rms) attenuation and the phase error are within 0.8 dB and 16 $^{\circ}$ , respectively, the reference state insertion loss (IL) is better than 2.3 dB, and the return loss is better than 15 dB for all the 64 attenuation states; the total chip size is 2 mm $^{2}$ .
27 March 2024 in IEEE Transactions on Microwave Theory and Techniques
In this article, a novel waveguide reconfigurable Schottky diode-based frequency doubler with tunable multiband high efficiency output is proposed and demonstrated. The multiband frequency output is achieved by reconfigurable input waveguide matching and cross-band output circuits matching. In the doubler, the whole cavity is composed of two parts: reconfigurable input matching waveguide cavities and coused main circuit associated with the coused cavity. These reconfigurable cavities are designed to match input impedance for corresponding band. The coused main circuit is adopted by weight optimization to fulfill output match of multiband. Then, the reconfigurable cavity is assembled into doubler through reduced-height waveguide choke flange, which aims to alleviate the assembly interconnection losses. Sample of the frequency doubler, operating at 170, 183, and 220 GHz, has been demonstrated based on this prototype. Measured results indicate that, the peak efficiencies of three bands are 38%, 34.5%, and 22.3%, respectively, with a total tunable operating bandwidth of 50 GHz.
8 July 2019 in IEEE Access
A novel reconfigurable non-Foster capacitance (NFC) using negative group delay (NGD) circuit is presented in this paper. The NGD circuit is based on a multi-order distributed amplifier which is used to achieve both NGD performance and gain compensation. By introducing shunt and series varactors next to trans-conductance transistors in the amplifier, the characteristic impedance, and electric length of transmission lines in the distributed amplifier can be flexibly tuned. As a result, the gain, phase shift, and negative group delay value of the proposed NGD circuit can be easily controlled as desired, and therefore, the scattering parameters S 21 can be adjusted to match with an ideal NFC, resulting in reconfigurable non-Foster capacitance. The working frequency ranges, equivalent negative capacitance value, and connection modes of the NFC be fully reconfigured by appropriately controlling the voltages applied to the varactors. Both simulation and measurement results were given, which agree well with each other. The experimental results show that the NFC value can be tuned from -1.1 to -2.5pF with 1 GHz center frequency and the working frequency can be tuned from 0.7 to 0.8 GHz with -10 pF shunt NFC.