Structural displacement monitoring is one of the major tasks of structural health monitoring and it is a significant challenge for research and engineering practices relating to large-scale civil structures. While computer vision-based structural monitoring has gained traction, current practices largely focus on laboratory experiments, small-scale structures, or close-range applications. This paper demonstrates its applications on three landmark long-span suspension bridges in Turkey: the First Bosphorus Bridge, the Second Bosphorus Bridge, and the Osman Gazi Bridge, among the longest landmark bridges in the world, with main spans of 1074 m, 1090 m, and 1550 m, respectively. The presented studies achieved non-contact displacement monitoring from a distance of 600 m, 755 m, and 1350 m for the respective bridges. The presented concepts, analysis, and results provide an overview of long-span bridge monitoring using computer vision-based monitoring. The results are assessed with conventional monitoring approaches and finite element analysis based on observed traffic conditions. Both displacements and dynamic frequencies align well with these conventional techniques and finite element analyses. This study also highlights the challenges of computer vision-based structural monitoring of long-span bridges and presents considerations such as the encountered adverse environmental factors, target and algorithm selection, and potential directions of future studies.
2 January 2019 in Bulletin of Engineering Geology and the Environment
The present study is aimed to estimate the influence of the web distortion on the elastic (Lr) and plastic (Lp) limiting lengths given in the American Institute of Steel Construction (AISC code) for the lateral torsional buckling behavior of steel beams. For this aim, the W44x335 beam is adopted in the buckling analyses carried out by the ABAQUS finite element (FE) program. The strain results at mid-height of the web at mid-span of the beam are taken into account as monitoring parameters. The web strain results are found highly greater than the yield strain value when L/Lr is equal to 1.0. Hence, the elastic limiting length (Lr) is required to be considered greater than the calculated length as per the code formulation. The section is obtained to reach the maximum strain value at the web before the unbraced length (L) is equal to the plastic limiting length (Lp). Therefore, the calculated Lp is estimated with the given analytical formulation to be highly shorter than the length through the FE analysis. These outcomes prove that the formulations of the limiting lengths proposed in the AISC code don’t consider the influence of the web distortion that is predicted to lead to reducing the torsional and warping rigidity of the section. With the study, it is proposed to determine a reduction coefficient by performing more numerical analyzes for different cross sections and free openings in the regulation.