Codends are the posterior components of trawl nets that collect the catch and play a crucial role in the selectivity process. Due to the accumulation of catch and the variety of catch types, the quality of catch and trawl selectivity can be negatively impacted. Therefore, this study aims to investigate the effects of various catch configurations on the hydrodynamic characteristics, geometrical profile, and fluttering motions of the codend in a flume tank. A codend structure was designed and tested using various catch configurations, including grooved-type configurations (canvas, green canvas, basketballs) and spherical configurations (table tennis balls filled with water, balloons filled with water, and balls made of twine) in the flume tank. The sea trial data were compared with the flume tank data. The results indicate that there were no significant differences in the codend profiles between the different catch configurations. The drag of the codend with a grooved-type configuration was 13.63% greater than that obtained using a spherical configuration as the catch. The wavelet coefficient obtained from the codend drag revealed that the oscillations of the codend with a grooved-type catch configuration began at a periodicity of 0.07 s and were more intense than that of the codend with the spherical catch configuration. Moreover, these amplitudes increased as the codend flow velocity increased. The wavelet analysis results showed that the dominant frequency of the periodic high-energy coherent structures for the codend drag and codend displacements was detected at a low-frequency. In terms of displacement oscillation characteristics, the table tennis ball filled with water was an approximate substitute for real catch during the sea trial because the difference in wavelet coefficients for the codend displacements in amplitude and the period between the model codend with the table tennis ball filled with water and the full-scale codend was 91% and 89%, respectively. The findings of this study confirm the feasibility of replacing real catch with simulated catch configurations with similar shapes in model testing. They can provide basic scientific data for improving the hydrodynamic characteristics and selectivity of the codend structure.

The grid is a crucial component in constructing grid-type bycatch reduction devices. The grid’s structural characteristics and orientation significantly impact the hydrodynamic characteristics and efficacy of the separation device. Therefore, it is essential to thoroughly understand the grid device’s hydrodynamic characteristics and flow field to optimize its structure. Thus, this study used CFD numerical simulation and flume tank experiments to investigate the effects of inclination grid angles and grid bar spacing on hydrodynamic forces and flow fields around a circular grid. The results indicated that the hydrodynamic forces acting on the circular grid increased with higher flow velocity and inclination grid angle, decreasing with smaller grid bar spacing. Flow velocity acceleration zones were observed at the upper and lower ends of the grid and between the grid bars. Additionally, upwelling and vortices were present at the back of the grid. It was found that an increase in the inclination grid angle accelerated the vortex and wake effects.

Netting is an important component of fishing gear design, and its ability to sink determines the effectiveness of fishing gears such as purse seines, falling nets, and stick-held nets. Therefore, it is crucial to thoroughly investigate the sinking parameters (sinking depth and sinking speed) of the netting panel as a function of the leadline weights using various twine materials, knot types, and solidity ratios. In this study, a generalized additive model (GAM) was utilized to analyze the impact of each factor on the sinking performances of the netting. The results revealed that the sinking depth of the netting was positively correlated with sinking time and leadline weight. However, the netting featured a maximum sinking depth limit, indicating that the sinking depth would not increase beyond a leadline weight of 69.5 g. During the initial phase of the sinking process, the sinking velocity of each netting panel initially increased but gradually decreased over time. The incorporation of a leadline weight reduced sinking time. Thereby, polyester netting exhibited the shortest average sinking time. A comparison of netting types with similar solidity ratios showed that the maximum sinking depth of the nylon netting was 13.20% and 10.11% greater than that of polyethylene and polyester nettings, respectively. In addition, nylon nets’ time average sinking speed was 64.58% and 4.62% greater than that of polyethylene and polyester nettings, respectively. The analysis of the GAM model clearly showed that the leadline weight has a significant effect on the netting sinking speed and depth. To ensure that the netting can reach its maximum sinking speed, it is strongly recommended to use nylon and polyester nettings with a low solidity ratio, i.e., a lower twine diameter and greater mesh size with a higher leadline weight, when constructing fishing gear such as purse seines with higher net leadline weights.