The demand for energy has increased tremendously around the whole world due to rapid urbanization and booming industrialization. Energy is the major key to achieving an improved social life, but energy production and utilization processes are the main contributors to environmental pollution and greenhouse gas emissions. Mitigation of the energy crisis and reduction in pollution (water and air) difficulties are the leading research topics nowadays. Carbonaceous materials offer some of the best solutions to minimize these problems in an easy and effective way. It is also advantageous that the sources of carbon-based materials are economical, the synthesis processes are comfortable, and the applications are environmentally friendly. Among carbonaceous materials, activated carbons, graphene, and carbon nanotubes have shown outstanding performance in mitigating the energy crisis and environmental pollution. These three carbonaceous materials exhibit unique adsorption properties for energy storage, water purification, and gas cleansing due to their outstanding electrical conductivity, large specific surface areas, and strong mechanical strength. This paper reviews the synthesis methods for activated carbons, carbon nanotubes, and graphene and their significant applications in energy storage, water treatment, and carbon dioxide gas capture to improve environmental sustainability.
In the modern world, as the population rises and fossil fuel supplies decline, energy demands continue to rise. Moreover, the use of fossil fuels harms the ecology, contributing to pollution and global warming. In order to overcome these difficulties, several approaches are revealed, such as the utilization of biomass as a renewable source of energy. Studies revealed that biomass can be converted into bioenergy via several thermal conversion processes, like pyrolysis, gasification, and torrefaction. Pyrolysis is the most convenient process to obtain three different types of biofuels (biochar as a solid, bio-oil as a liquid, and syngas as a gas). The biofuels produced in this process are normally lower in quality and cannot be used directly as fuel because they contain many undesirable components. Catalytic pyrolysis is one of the best processes to upgrade the quality of biofuels. Several varieties of catalysts are used in the catalytic pyrolysis process (ex situ and in situ). Due to stable operating conditions, both catalytic and non-catalytic pyrolysis procedures produce biochar that has a consistent output. Meanwhile, the effects of catalysts in the catalytic pyrolysis process considerably enhance the quality and quantity of bio-oils and syngas. By removing the unwanted oxygenated and nitrogenous components, the bio-oils produced through the catalytic pyrolysis method have a higher calorific value, reduced viscosity, and improved stability. Many researchers have looked at ways to increase the rate of pyrolysis, whereas a few have focused on maximizing the effects of the factors in order to improve the efficiency of catalytic pyrolysis. This review addresses the impact of catalysts on the catalytic pyrolysis of biomass to enhance the quality of the bio-oils in great detail. Machine learning and techno-economic analysis were investigated, as well as the future potential of the catalytic pyrolysis method for the generation of bio-oil.
The global population has increased over time, therefore the need for sufficient energy has risen. However, many countries depend on nonrenewable resources for daily usage. Nonrenewable resources take years to produce and sources are limited for generations to come. Apart from that, storing and energy distribution from nonrenewable energy production has caused environmental degradation over the years. Hence, many researchers have been actively participating in the development of energy storage devices for renewable resources using batteries. For this purpose, the lithium-ion battery is one of the best known storage devices due to its properties such as high power and high energy density in comparison with other conventional batteries. In addition, for the fabrication of Li-ion batteries, there are different types of cell designs including cylindrical, prismatic, and pouch cells. The development of Li-ion battery technology, the different widely used cathode and anode materials, and the benefits and drawbacks of each in relation to the most appropriate application were all thoroughly studied in this work. The electrochemical processes that underlie battery technologies were presented in detail and substantiated by current safety concerns regarding batteries. Furthermore, this review collected the most recent and current LIB recycling technologies and covered the three main LIB recycling technologies. The three recycling techniques—pyrometallurgical, hydrometallurgical, and direct recycling—have been the subject of intense research and development. The recovery of valuable metals is the primary goal of most recycling processes. The growth in the number of used LIBs creates a business opportunity to recover and recycle different battery parts as daily LIB consumption rises dramatically.
The depletion of fossil fuels in the current world has been a major concern due to their role as a primary source of energy for many countries. As non-renewable sources continue to deplete, there is a need for more research and initiatives to reduce reliance on these sources and explore better alternatives, such as renewable energy. Hydrogen is one of the most intriguing energy sources for producing power from fuel cells and heat engines without releasing carbon dioxide or other pollutants. The production of hydrogen via the electrolysis of water using renewable energy sources, such as solar energy, is one of the possible uses for solid oxide electrolysis cells (SOECs). SOECs can be classified as either oxygen-ion conducting or proton-conducting, depending on the electrolyte materials used. This article aims to highlight broad and important aspects of the hybrid SOEC-based solar hydrogen-generating technology, which utilizes a mixed-ion conductor capable of transporting both oxygen ions and protons simultaneously. In addition to providing useful information on the technological efficiency of hydrogen production in SOEC, this review aims to make hydrogen production more efficient than any other water electrolysis system.
This paper deals with the study of the optical properties of one-dimensional SrTiO3/PAN-based photocatalysts with the addition of metal oxide particles and the determination of their bandgaps. One-dimensional photocatalysts were obtained by the electrospinning method. Particles of metals such as iron, chromium, and copper were used as additives that are capable of improving the fibers’ photocatalytic properties based on SrTiO3/PAN. The optimal ratios of the solutions for the electrospinning of fibers based on SrTiO3/PAN with the addition of metal oxide particles were determined. The transmission and reflection of composite photocatalysts with metal oxide particles were measured in a wide range of spectra, from the ultraviolet region (185 nm) to near-infrared radiation (3600 nm), to determine the values of their bandgaps. Thus, the introduction of metal oxide particles resulted in a decrease in the bandgaps of the obtained composite photocatalysts compared to the initial SrTiO3/PAN (3.57 eV), with the following values: −3.11 eV for SrTiO3/PAN/Fe2O3, −2.84 eV for SrTiO3/PAN/CuO, and −2.89 eV for SrTiO3/PAN/Cr2O3. The obtained composite photocatalysts were tested for the production of hydrogen by the splitting of water–methanol mixtures under UV irradiation, and the following rates of hydrogen evolution were determined: 344.67 µmol h−1 g−1 for SrTiO3/PAN/Fe2O3, 398.93 µmol h−1 g−1 for SrTiO3/PAN/Cr2O3, and 420.82 µmol h−1 g−1 for SrTiO3/PAN/CuO.
Energy demands keep increasing in this modern world as the world population increases, which leads to a reduction in fossil fuels. To resolve these challenges, Pennisetum purpureum, an invasive grass in Brunei Darussalam, was examined as the feedstock for renewable energy through a catalytic pyrolysis process. The activated carbon was applied as the catalyst for a simple and economical solution. The catalytic pyrolysis was executed at 500 °C (the temperature for the highest biofuel yield) for both reactors to produce the highest amount of upgraded biofuels. The biochar produced from the non-catalytic and catalytic pyrolysis processes showed a consistent yield due to stable operating conditions, from which the activated carbon was generated and used as the catalyst in this work. A significant amount of improvement was found in the production of biofuels, especially bio-oil. It was found that for catalysts, the number of phenolic, alcohol, furans, and ketones was increased by reducing the amount of acidic, aldehyde, miscellaneous oxygenated, and nitrogenous composites in bio-oils. The highest amount of phenolic compounds was produced due to a number of functional groups (-C=O and -OH) in activated carbon. The regenerated activated carbons also showed promising outcomes as catalysts for upgrading the bio-oils. The overall performance of synthesized and regenerated activated carbon as a catalyst in catalytic pyrolysis was highly promising for improving the quality and stability of bio-oil.