Without pure water, it is impossible to survive for any living beings. The ratio of freshwater on our planet is very poor and the demand is increasing with time for the growing population. Furthermore, water is being contaminated by industrial and agricultural activities, pharmaceuticals, technocratic civilization, pesticides, garments, global changes etc. In addition to this, environmental pollution and global warming are swelling due to the greenhouse and harmful gases generated from the dumping and burning of fossil fuel. Addressing these problems, it is necessary to find out the cost-effective and environmental friendly processes to purify the contaminated water and air. Activated carbons (ACs) are one of the best solutions for removing the pollutants from aqueous and atmosphere as it is the carbonaceous materials with a high degree of porosity, well-developed surface area, and distinguished functional groups which are required for elimination of contaminants. The preparations of activated carbon are easy and safe processes, mainly from the pyrolysis or gasification of biomass with heat and/or chemicals. The recycling and regeneration of activated carbon after use are also essential for resource maintenance and environmental safety. Thus, AC can protect the ecosystem in a double direction by purifying the water and air from the pollutants.

To evaluate the possibilities for biofuel and bioenergy production Acacia Holosericea, which is an invasive plant available in Brunei Darussalam, was investigated. Proximate analysis of Acacia Holosericea shows that the moisture content, volatile matters, fixed carbon, and ash contents were 9.56%, 65.12%, 21.21%, and 3.91%, respectively. Ultimate analysis shows carbon, hydrogen, and nitrogen as 44.03%, 5.67%, and 0.25%, respectively. The thermogravimetric analysis (TGA) results have shown that maximum weight loss occurred for this biomass at 357 °C for pyrolysis and 287 °C for combustion conditions. Low moisture content (<10%), high hydrogen content, and higher heating value (about 18.13 MJ/kg) makes this species a potential biomass. The production of bio-char, bio-oil, and biogas from Acacia Holosericea was found 34.45%, 32.56%, 33.09% for 500 °C with a heating rate 5 °C/min and 25.81%, 37.61%, 36.58% with a heating rate 10 °C/min, respectively, in this research. From Fourier transform infrared (FTIR) spectroscopy it was shown that a strong C–H, C–O, and C=C bond exists in the bio-char of the sample.

The demand for energy has increased tremendously around the whole world due to rapid urbanization and booming industrialization. Energy is the major key to achieving an improved social life, but energy production and utilization processes are the main contributors to environmental pollution and greenhouse gas emissions. Mitigation of the energy crisis and reduction in pollution (water and air) difficulties are the leading research topics nowadays. Carbonaceous materials offer some of the best solutions to minimize these problems in an easy and effective way. It is also advantageous that the sources of carbon-based materials are economical, the synthesis processes are comfortable, and the applications are environmentally friendly. Among carbonaceous materials, activated carbons, graphene, and carbon nanotubes have shown outstanding performance in mitigating the energy crisis and environmental pollution. These three carbonaceous materials exhibit unique adsorption properties for energy storage, water purification, and gas cleansing due to their outstanding electrical conductivity, large specific surface areas, and strong mechanical strength. This paper reviews the synthesis methods for activated carbons, carbon nanotubes, and graphene and their significant applications in energy storage, water treatment, and carbon dioxide gas capture to improve environmental sustainability.