PIngping Gu

Dr. PIngping Gu


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 June 2025 in Materials
Verified
Journal Article
Open access
PDF file
ZZZhu Zhenyu
Zhu Zhenyu
BMBintang Mas Mediamartha
Bintang Mas Mediamartha
SHUYANG YUSHUYANG YU
SHUYANG YU
YLYifei Li
Yifei Li
JXJian Xu
Jian Xu
PGPIngping Gu
PIngping Gu
Material scientists face a critical challenge in characterizing the mesoscopic damage evolution of concrete under tensile loading, as traditional experimental and theoretical approaches struggle to resolve the complexities of its multiphase heterogeneous structure. This study addresses this gap by employing the Discrete Element Method (DEM) with PFC2D to model concrete’s mesoscopic cracking, integrating aggregates, mortar, interfacial transition zones (ITZ), and pores. Through parameter calibration against experimental data, uniaxial tensile simulations reveal how aggregate percentages (30–45%) and pore percentages (1–6%) influence crack propagation and tensile strength. Specifically, when the aggregate percentage increased from 30% to 40%, the peak tensile strength decreased by 26%, while increasing from 40% to 45% led to a recovery in strength. With porosity increasing from 2% to 4%, the peak strength dropped by approximately 3%, and further to 6% caused a 14% reduction, demonstrating the quantitative impact of microstructural parameters on concrete performance. Simulation results align closely with experimental data, validating DEM’s efficacy in modeling mesoscopic cracking. This work provides a mesoscopic theoretical foundation for optimizing concrete’s tensile properties and underscores the need to incorporate realistic mesoscopic features in future simulations.

15 June 2025 in Buildings
Verified
Journal Article
Open access
PDF file
HXHesi Xu
Hesi Xu
BPBrian Putsikai
Brian Putsikai
SHUYANG YUSHUYANG YU
SHUYANG YU
JYJun Yu
Jun Yu
YLYifei Li
Yifei Li
PGPIngping Gu
PIngping Gu
In cold-region rock engineering, freeze–thaw cycle-induced crack propagation in fractured rock masses serves as a major cause of disasters such as slope instability. Existing studies primarily focus on the influence of individual fissure parameters, yet lack a systematic analysis of the crack propagation mechanisms under the coupled action of multiple parameters. To address this, we establish three groups of slope models with different rock bridge distances (d), rock bridge angles (α), and fissure angles (β) based on the PFC2D discrete element method. Frost heave loads are simulated by incorporating the volumetric expansion during water–ice phase change. The Parallel Bond Model (PBM) is used to capture the mechanical behavior between particles and the bond fracture process. This reveals the crack evolution laws under freeze–thaw cycles. The results show that, at a short rock bridge distance of d = 60 m, stress concentrates in the fracture zone. This easily leads to the rapid penetration of main cracks and triggers sudden instability. At a long rock bridge distance where d ≥ 100 m, the degree of stress concentration decreases. Meanwhile, the stress distribution range expands, promoting multiple crack initiation points and the development of branch cracks. The number of cracks increases as the rock bridge distance grows. In cases where the rock bridge angle is α ≤ 60°, stress is more likely to concentrate in the fracture zone. The crack propagation exhibits strong synergy, easily forming a penetration surface. When α = 75°, the stress concentration areas become dispersed and their distribution range expands. Cracks initiate earliest at this angle, with the largest number of cracks forming. Cumulative damage is significant under this condition. When the fissure angle is β = 60°, stress concentration areas gather around the fissures. Their distribution range expands, making cracks easier to propagate. Crack propagation becomes more dispersed in this case. When β = 30°, the main crack rapidly penetrates due to stress concentration, inhibiting the development of branch cracks, and the number of cracks is the smallest after freeze–thaw cycles. When β = 75°, the freeze–thaw stress dispersion leads to insufficient driving force, and the number of cracks is 623. The research findings provide a theoretical foundation for assessing freeze–thaw damage in fractured rock masses of cold regions and for guiding engineering stability control from a multi-parameter perspective.

26 November 2024 in Buildings
Verified
Journal Article
Open access
PDF file
PGPIngping Gu
PIngping Gu
HWHao Wu
Hao Wu
LLLuchang Li
Luchang Li
ZLZhanghao Li
Zhanghao Li
JHJingyi Hong
Jingyi Hong
MZMei-Ling Zhuang
Mei-Ling Zhuang
Widening existing bridges is an important way to meet the surge in traffic demand, which is often carried out in a way that does not interrupt traffic. To investigate the effect of traffic vibration on the compressive strength of high-strength concrete and the splitting strength of new-to-old concrete interfaces, the initial to final set time of high-strength concrete C60 was first investigated in this article. Then, the traffic disturbance parameters were determined. Later, the compressive strength of C60 concrete at different stages under traffic disturbance parameters was carried out. Finally, the splitting tensile strength of new-to-old concrete specimens at different stages with different loading modes was tested. The test results indicated that the compressive strength of the specimens vibrated for 3 h and cured for 3, 7, and 28 days was increased by 4.3%, 5.7%, and 11.9%, respectively; those of the specimens vibrated for 7 h and cured for 3, 7, and 28 days was decreased by 13.7%, 20.4%, and 19.9%, respectively; the effect traffic vibration on the compressive strength of the specimens vibrated for 5 h was not obvious. When loaded along the old and new concrete joint, the specimens cracked along the joint; the splitting tensile strengths of the specimen at different disturbed stages were significantly decreased. When loaded perpendicular to the joint, the specimens cured for 3 and 7 days still cracked along the joint, and the splitting tensile strengths of the specimen at different disturbed stages were significantly decreased; while the specimens cured for 28 days cracked in the direction perpendicular to the joint, the tensile strengths of the specimens at different disturbed stages were significantly decreased. This study can promote the widening and improvement of existing concrete highways and bridges, which can save resources and improve land use.

8 December 2025 in Buildings
Verified
Journal Article
Open access
PDF file
MZMei-Ling Zhuang
Mei-Ling Zhuang
JDJibing Deng
Jibing Deng
CSChuanzhi Sun
Chuanzhi Sun
LGLi Gao
Li Gao
XZXihan Zhong
Xihan Zhong
PGPIngping Gu
PIngping Gu
The widespread adoption of high-strength steel reinforcement in China has driven a growing demand for 600 MPa grade and higher-strength stirrups in engineering applications. This study experimentally investigates the seismic performance of concrete columns reinforced with 630 MPa high-strength steel stirrups. Six concrete columns were designed and fabricated, incorporating key variables including concrete strength, stirrup strength, and stirrup spacing ratio. Low-cycle reversed loading tests were subsequently conducted on these specimens, enabling a thorough evaluation of their seismic characteristics. Additionally, the study examines the cumulative damage effects and confining influence of 630 MPa high-strength stirrups on the core concrete. The findings reveal that concrete columns with a low ratio of 630 MPa high-strength stirrups exhibit enhanced seismic performance when the concrete strength is relatively low. However, with increasing concrete strength, the confinement efficiency of 630 MPa ultra-high-strength stirrups diminishes, leading to accelerated damage progression and reduced ductility. Both low- and high-strength concrete columns benefit from a high stirrup ratio, which provides effective confinement. Furthermore, 630 MPa high-strength stirrups help mitigate damage accumulation while enhancing yield displacement, peak displacement, ultimate displacement, ductility, and energy dissipation capacity. The use of 630 MPa high-strength stirrups not only ensures superior seismic performance but also reduces reinforcement requirements and improves construction efficiency.

10 January 2025 in Heliyon
Verified
Journal Article
Open access
PGPIngping Gu
PIngping Gu
JYJiahui Yu
Jiahui Yu
XZxianzhong zhou
xianzhong zhou
Hengrong JuHengrong Ju
Hengrong Ju
With the in-depth development and integration of science and technology, intelligent manufacturing has gradually become a trend in the manufacturing industry. However, it is difficult for the traditional business model to maximize the use of resources. To address these problems, a shared value network model based on synergy theory is first proposed, which consists of three layers: resource network layer, value connection layer and resource coordination layer. Then, to meet the market demand and maximize the value gain, the optimization scheme is given according to the coordination theory and priority strategy in the design of the operation mechanism of the shared value network model. Finally, the effectiveness of the proposed model is verified by analyzing an example in the actual industry.

23 August 2025 in Buildings
Verified
Journal Article
Open access
PDF file
XHXueying Hu
Xueying Hu
SHUYANG YUSHUYANG YU
SHUYANG YU
YLYifei Li
Yifei Li
YTYihan Tang
Yihan Tang
YSYing Sun
Ying Sun
PGPIngping Gu
PIngping Gu
In urban construction, the efficient demolition of concrete structures imposes high-precision requirements on blasting technology. The mesoscopic evolution mechanism of concrete blasting damage is the key to optimizing blasting parameters. In this study, a numerical model of concrete blasting is established using Particle Flow Code (PFC). By comparing it with an experimental model containing a blast hole and a horizontal single fissure, the rationality and reliability of the model in simulating blasting damage evolution are verified. On this basis, four groups of control variable schemes are designed (concrete particle size distribution, aggregate content, prefabricated fissure inclination angle, and fissure length) to systematically explore the effects of mesoscopic structures and macroscopic defects on blasting damage. The results show that larger concrete particles make it easier for damage cracks to avoid large particles, forming sparse and irregular crack networks. A higher aggregate content enhances the “obstruction-guidance” effect of aggregate distribution on damage. When the aggregate content is 40%, the vertical damage expansion is the most prominent, reaching up to 3.05 cm. Fissure inclination angle affects the damage direction by guiding the propagation path of stress waves. Fissures inclined at 30°~60° serve as preferential damage channels, while 90° vertical fissures make vertical damage more significant. An increased fissure length expands the damage range, and the damage degree is the highest for a 40 mm long fissure, being 1.29 times that of a 30 mm fissure. The research results reveal the mesoscopic evolution laws of concrete blasting damage, providing a theoretical basis for the optimization of engineering blasting parameters and safety control.