Most African countries are acquiring new technologies to provide awareness and vocational training to trigger innovation in various areas, including manufacturing. However, the existing method that emphasizes least cost by bidders has been found to be deficient. This study conducts a literature review and identifies some CoBots based on the suitability of their properties to West Africa. A hybrid Multi-Criteria Decision-Making approach, comprising the Fuzzy Analytical Hierarchical Process and Interval Technique for Order of Preference by Similarity to Ideal Solution, together combined as FAHP-I-TOPSIS, was selected. This method was modeled and tested as a case study where data were collected from eight Robotics experts from West African countries. The data were analyzed through pairwise comparison and ranking to arrive at the most suitable training CoBot out of five alternatives, and six criteria were considered. Robot (R3) was selected, which, on average, satisfies their priority for Program Flexibility and Economic Cost criteria, because the robot is moderately costly and flexible in programming, too.
This experimental study investigates the effects of conventional and non-conventional (Electrical Discharge Machining, EDM) techniques on the performance of threading dies fabricated from H13 die steel. The research focuses on variations in material properties, operational efficiency, and failure mechanisms. Results indicate that conventional machining significantly increases die hardness, leading to higher mechanical stress and premature failure. In contrast, EDM maintains structural integrity with minimal hardness variation. Microstructural analysis confirms superior grain structure stability in EDM-processed dies. Performance testing showed that conventional threading dies failed after threading 16 inches of mild steel rods, while EDM-fabricated dies successfully threaded up to 20 inches. These findings underscore the detrimental effect of mechanically induced stress in conventional techniques and highlight the superior durability and dimensional precision achievable through non-conventional machining methods.