As a complementary technology to existing Radio Frequency (RF)-based solutions such as Cellular V2X (C-V2X) and Dedicated Short Range Communication (DSRC), Vehicular VLC (V-VLC) is gaining more attention in the research community as well as in the industry. This paper introduces a complete IEEE 802.11 compliant V-VLC system. The system relies on USRP software defined radios programmed using the GNURadio framework, a typical car headlight plus a custom driver electronics for the high-power car LEDs (sender), and a photo diode (receiver). Building upon our earlier work, we, for the first time, experimentally explore the communication performance in outdoor scenarios, even in broad daylight, and show that rather simple optical modifications help to reduce the ambient noise to enable long distance visible light communication. Our system also supports OFDM with a variety of Modulation and Coding Schemes (MCS) up to 64-QAM and is fully compliant with IEEE 802.11. We performed an extensive series of experiments to explore the performance of our system, even using higher order MCSs in daylight. Our results demonstrated a high reliability for distances up to 75m with the presented system, regardless of the time of the day.
Realising an ideal lithium-ion battery (LIB) cell characterised by entirely homogeneous physical properties poses a significant, if not an impossible, challenge in LIB production. Even the slightest deviation in a process parameter in its production leads to inhomogeneities and causes a deviation in performance parameters of LIBs within the same batch. The greater the number and/or intensity of inhomogeneities, the more they need to be avoided. Severe inhomogeneities (defects), such as metal particle contamination, significantly impact the cell’s performance. Besides electrical measurements, image-based measurement methods can be used to identify defects and, thus, ensure the production quality and safety of LIBs. While the applicability of computed tomography (CT) as an image-based measurement method for detecting defects has been proven, the limitations of this method still need to be determined. In this study, a systematic analysis of the capabilities of CT imaging was conducted. A multilayer pouch cell without an electrolyte was reassembled with several defects on one of the middle anodes. To investigate the boundaries of CT, defects such as a partial and complete removal of the coating, a cut, or a kink, as well as particle contaminations of various sizes and materials (aluminium, copper, iron) were chosen. By comparing the CT images of the cell using laser scanning microscope images of the defective anode, it could be proven that all selected defects except the kink were detectable.
13 January 2025 in IEEE Transactions on Radar Systems
Digitally modulated radar systems, such as phase-modulated continuous wave (PMCW), often struggle with high bandwidth demands for fine-range resolutions, posing challenges for cost-effective automotive applications. To address this issue, we propose a stepped-frequency PMCW (SF-PMCW) radar waveform in which the instantaneous bandwidth of a single pulse is extensively reduced while the range resolution is beyond the theoretical limit imposed by the instantaneous bandwidth. The proposed waveform spans a synthetic bandwidth across multiple pulses, achieving range estimates comparable to those typically achieved with higher instantaneous bandwidths. Simultaneously, the requirements for analog-to-digital converters (ADCs) are relaxed. Simulations have been performed to demonstrate the performance. The results indicate that the proposed SF-PMCW waveform with an instantaneous bandwidth of 100MHz can achieve range estimates as good as a PMCW waveform with an instantaneous bandwidth of 1GHz.
Commercial automotive radar systems for advanced driver assistance systems (ADASs) have relied on frequency-modulated continuous wave (FMCW) waveforms for years due to their low-cost hardware, simple signal processing, and established academic and industrial expertise. However, FMCW systems face several challenges, including limited unambiguous velocity, restricted multiplexing of transmit signals, and susceptibility to interference. This work introduces a unified automotive radar signal model and reviews the alternative modulation schemes such as phase-coded frequency-modulated continuous wave (PC-FMCW), phase-modulated continuous wave (PMCW), orthogonal frequency-division multiplexing (OFDM), orthogonal chirp division multiplexing (OCDM), and orthogonal time frequency space (OTFS). These schemes are assessed against key technological and economic criteria and compared with FMCW, highlighting their respective strengths and limitations.
Advanced driver assistance systems (ADASs) rely heavily on the resilient spatial perception of the surrounding environment of vehicles enabled by sensor systems, such as radio detection and ranging (RADAR), light detection and ranging (LIDAR), and cameras. The electric/electronic (E/E) architecture of the vehicle must ensure that the sensor systems and data gathering and processing for the perception operate under all circumstances. However, certain factors can affect the resilience of the sensor system and the supporting E/E architecture, such as internal software failures and external weather conditions. This paper provides a comprehensive review of the latest developments in automotive sensor systems and architectures, highlighting potential disturbances and presenting corresponding countermeasures for hardware and software failures. We also identify challenging applications and assess the requirements for resilience to make these applications feasible under all circumstances. Based on this review, we propose a comprehensive framework for developing resilient sensor systems and architectures that can serve as a basis for further research towards fully automated driving.