Advanced driver assistance systems (ADASs) rely heavily on the resilient spatial perception of the surrounding environment of vehicles enabled by sensor systems, such as radio detection and ranging (RADAR), light detection and ranging (LIDAR), and cameras. The electric/electronic (E/E) architecture of the vehicle must ensure that the sensor systems and data gathering and processing for the perception operate under all circumstances. However, certain factors can affect the resilience of the sensor system and the supporting E/E architecture, such as internal software failures and external weather conditions. This paper provides a comprehensive review of the latest developments in automotive sensor systems and architectures, highlighting potential disturbances and presenting corresponding countermeasures for hardware and software failures. We also identify challenging applications and assess the requirements for resilience to make these applications feasible under all circumstances. Based on this review, we propose a comprehensive framework for developing resilient sensor systems and architectures that can serve as a basis for further research towards fully automated driving.
This study presents a novel approach to overcome the limitations of traditional Finite Element Analysis (FEA) for magnetic components, which are time-consuming and require specialized knowledge. By using neural networks, the simulation process is simplified. Thousands of 2D and 3D simulations were conducted, and the neural network design, comprising an initial Neural Network (NN), and a following pix2pix network, effectively predicts and refines the magnetic field. This method reduces computational time from seconds to milliseconds and achieves deviations of less than 5 %.
This paper improves the analytic calculation of magnetic flux density and core loss inside an E-core made up of ferrite. Based on Finite Element Analysis (FEA) simulations, the error of analytical techniques is evaluated, and new corrections applied. Target values are the total core loss, mean magnetic flux density and standard deviation. The calculation of the magnetic flux density and core loss using analytical formulas and finite element simulations are compared. Simulation model construction and their calculation is conducted in ANSYS Maxwell software. The proposed changes in the analytic calculation enables developers to generate fast design studies with over 100 000 analytic calculations in the same time one simulation runs. Calculations of the analytical computations match with the simulation results with a minimum error of 1.424% for constant permeability. Non-Linear permeability exhibits the maximum error of calculation with 11.625%, in contrast to an error of 52.888% with a not optimized method.