The usage scenarios defined in the ITU-M2150-1 recommendation for IMT-2020 systems, including enhanced Mobile Broadband (eMBB), Ultra-reliable Low-latency Communication (URLLC), and massive Machine Type Communication (mMTC), allow the possibility of accessing different services through the set of Radio Interface Technologies (RITs), Long-term Evolution (LTE), and New Radio (NR), which are components of RIT. The potential of the low and medium frequency bands allocated by the Federal Communications Commission (FCC) for the fifth generation of mobile communications (5G) is described. In addition, in the Internet of Things (IoT) applications that will be covered by the case of use of the mMTC are framed. In this sense, a propagation channel measurement campaign was carried out at 850 MHz and 5.9 GHz in a covered corridor environment, located in an open space within the facilities of the Pedagogical and Technological University of Colombia campus. The measurements were carried out in the time domain using a channel sounder based on a Universal Software Radio Peripheral (USRP) to obtain the received signal power levels over a range of separation distances between the transmitter and receiver from 2.00 m to 67.5 m. Then, a link budget was proposed to describe the path loss behavior as a function of these distances to obtain the parameters for the close-in free space reference distance (CI) and the floating intercept (FI) path loss prediction models. These parameters were estimated from the measurements made using the Minimum Mean Square Error (MMSE) approach. The estimated path loss exponent (PLE) values for both the CI and FI path loss models at 850 MHz and 3.5 GHz are in the range of 2.21 to 2.41, respectively. This shows that the multipath effect causes a lack of constructive interference to the received power signal for this type of outdoor corridor scenario. These results can be used in simulation tools to evaluate the path loss behavior and optimize the deployment of device and sensor network infrastructure to enable 5G-IoT connectivity in smart university campus scenarios.
The objective of this work is to propose experimental path loss propagation models for communication channels in indoor environments. In this sense, an experimental path loss characterization has been achieved, according to the measurements campaign carried out in a typical scenario of a university campus. These narrowband measurements were collected in the laboratory environment at 3.7 GHz in line-of-sight (LOS) condition. Also, these measurements were carried out at night to simulate stationary channel conditions. Thus, the results obtained show the values of the parameters of the close-in (CI) free space reference distance and floating-intercept (FI) path loss models, in terms of the transmitter and receiver separation distance. It should be noted that these values of the path loss models have been extracted applying linear regression techniques to the measured data. Also, these values agree with the path loss exponent values presented by other researchers in similar scenarios. The path loss behavior can be described with the implementation of these models. However, more measurement campaigns are needed to improve the understanding of propagation channel features, as well as to obtain better precision in the results obtained. This, in order to optimize the deployment and performance of next fifth-generation (5G) networks that combine indoor environments to offer their services and applications.
11 September 2023 in Encuentro Internacional de Educación en Ingeniería
El crecimiento de las aplicaciones de vehículos aéreos no tripulados (UAV) es innegable, ya que sus potencialidades han aumentado significativamente. Los sistemas UAV requieren comunicaciones confiables para controlar la navegación o transmitir datos confidenciales, lo que se vuelve crucial para el desarrollo de la tecnología UAV. Los sistemas de comunicaciones utilizan el canal inalámbrico para propagar un frente de onda entre el transmisor/receptor y el vehículo que puede obstruirse o desvanecerse. El desvanecimiento es causado por fenómenos de propagación, reflexiones, difracciones, dispersión y las características del escenario de propagación produciendo efectos multicamino y Doppler, dando lugar a sistemas de desvanecimiento selectivo tiempo-frecuencia y sistemas de desvanecimiento de dispersión en tiempo-frecuencia, que afectan a la señal transmitida por el canal. Comúnmente, la obstrucción se produce por la dispersión de objetos en el suelo, como edificios, la orografía del terreno y por la propia estructura del UAV. Los modelos de propagación permiten el desarrollo y selección de los sistemas de comunicación óptimos para cada aplicación. Proponer modelos de propagación es fundamental para lograr una caracterización adecuada del canal de comunicación para comprender su comportamiento. Las caracterizaciones de canales se pueden realizar a través de análisis teóricos o con simulaciones electromagnéticas computarizadas. Sin embargo, las caracterizaciones más confiables usan medidas experimentales en el campo para validar modelos teóricos o simulados. Este trabajo muestra el avance que han tenido los modelos de pérdidas de propagación desarrollados a través de la caracterización experimental de un canal de comunicación inalámbrico entre un UAV y una infraestructura terrestre. También se muestran los trabajos de implementación de sondas de canal en bandas bajas y medias de 5G.