We propose a numerical and automatic quadratic phase aberration elimination method in digital holography for phase-contrast imaging. A histogram segmentation method based on Gaussian 1σ-criterion is used to obtain the accurate coefficients of quadratic aberrations using the weighted least-squares algorithm. This method needs no manual intervention for specimen-free zone or prior parameters of optical components. We also propose a maximum-minimum-average-standard deviation (MMASD) metric to quantitatively evaluate the effectiveness of quadratic aberration elimination. Simulation and experimental results are demonstrated to verify the efficacy of our proposed method over the traditional least-squares algorithm.

We proposed a numerical and accurate quadratic phase aberration compensation method in digital holography. A phase imitation method based on Gaussian 1σ-criterion is used to obtain the morphological features of the object phase using partial differential, filtering and integration successively. We also propose an adaptive compensation method based on a maximum-minimum-average- α-standard deviation (MMAαSD) evaluation metric to obtain optimal compensated coefficients by minimizing the above metric of the compensation function. The effectiveness and robustness of our method are demonstrated by simulation and experiments.

A system and method for non-destructive detection of cracks of different width and depths based on digital speckle interferometry coupled with pulsed laser excitation is introduced and tested. Based on photoacoustic effect, acoustic waves are induced onto the rear of the samples by pumping a pulsed laser beam on it. The generated mechanical wave propagates from the rear surface of the sample to the front while front surface is monitored by speckle interferometry. In order to acquire information about surface deformation, the front surface is illuminated by continuous wave laser and interference are imaged onto the camera as speckle images. After processing the produced fringe patterns, it indicates the presence and location of the cracks in qualitative way. In this study, the system and method mentioned above are validated by detecting medium density fiberboard with simulated cracks. The fringe patterns from areas with or without defects are compared and discussed. Besides, the system and method to distinguish and predict cracks sizes is proposed and validated.

In this paper, based on Gaussian 1σ-criterion and histogram segmentation, a weighted least-squares algorithm is applied and validated on digital holographic speckle pattern interferometric data to perform phase separation on the complex interference fields. The direct structural diagnosis tool is used to investigate defects and their impact on a complex antique wall painting of Giotto. The interferometry data is acquired with a portable off-axis interferometer set-up with a phase-shifted reference beam coupled with the object beam in front of the digital photosensitive medium. A digital holographic speckle pattern interferometry (DHSPI) system is used to register digital recordings of interferogram sequences over time. The surface is monitored for as long as it deforms prior to returning to its initial reference equilibrium state prior to excitation. The attempt to separate the whole vs. local defect complex amplitudes from the interferometric data is presented. The main aim is to achieve isolation and visualization of each defect’s impact amplitude in order to obtain detailed documentation of each defect and its structural impact on the surface for structural diagnosis purposes.

The crack growth of transparent materials after laser wavelength irradiation was studied. It is known that laser irradiation is used in many applications for the ablation of undesired material and/or coatings. The impact of laser irradiation on cracks was studied using the digital holography (DH) technique. Transparent samples were irradiated using near-ultraviolet, visible, near-infrared, and infrared light. The DH system is able to detect cracks and crack growth of the transparent samples irradiated by a range of laser wavelengths. Results also show that light with infrared to near-infrared wavelengths has a great effect on crack growth. High-resolution photomechanical effects of laser irradiation on material expansion or/and generation of defects due to specific wavelengths are also illustrated. The DH system with a multispectral laser has practical applications for laser cleaning of painted artworks.