Natural fiber is a resource that is found abundantly and cost effective. It is decomposed easily and biodegradable. Natural fibers have a vital place in the industry and have the capability of replacing carbon fibers and conventional glass because of their biodegradability and eco-friendly characteristics. They have significant chemical, mechanical, and physical properties, which vary according to cellulose content in the fiber. Usually, with the increase in the cellulose content, the tensile strength of the fiber increases and with the increase in the non-cellulose content, the tensile strength of the fiber decreases. However, these chemical constituents are not the only factors that determine the tensile strength of the fiber. Certain other factors such as fiber age, maturity, location, and processing methods along with the source of the fiber also influence the tensile strength of the fiber. These properties of the natural fibers make it a vital component in engineering applications. Natural fibers meet the needs of humans and the manufacturing industry with their positive environmental effect and economic outlook. This review provides basic information and a segregated study on the mechanical properties of natural fibers, thus creating opportunities for future research and studies related to natural fiber–reinforced composites.
Natural fibers have started replacing synthetic fibers in every aspect of manufacturing, starting from building materials and locomotives to fabricating automobile panels, sports kits, toys, laptop...
1 August 2023 in Transactions on Electrical and Electronic Materials
The latent thermal power storage system has more characteristics than the sensitive storage system. The heating system is a process of releasing and absorbing heat energy using phase transfer material (PCM) and it provides more efficient energy than sensible heat storage. This also consist of high energy storage and high density. It provides high heat transfer in low volume and thereby enhances heat transfer. This enhances the capacity and efficiency of the EFU while extending the service life. The coil tube is designed for latent thermal energy storage to implement and enhance thermal performance during the loading and unloading process. The offloading time, however, was not affected by the flows. Higher throughput has also been shown to improve the effectiveness of recovery. The direction of flow of the HTF did not affect the total time of loading and recharging but affected the temperature changes of the PCM in the energy storage element. It is intended to predict the ability to store maximum energy as higher energy efficiency during the phase shift process. Parameters such as the mean temperature of the PCM, the growth of the melting front, the energy efficiency, and the number of generations of entropy are studied.
Flax fiber-containing polypropylene-based polymer matrix composites (PMCs) with different lignite fly ash (LFA) contents were synthesized using the formula (80 − x) PP − 20 F – x LFA (where x = 0, 2.5, 5.0, 7.5, and 10.0 wt.%) and analyzed. The added LFA acted as a filler material in the polymer network to re-formulate the microstructure of PMCs. The structural changes in the PMCs were induced to alter their thermal stability and mechanical strength. A linear increase in Tg, density, and compressive strength values was observed up to addition of 10 wt.% LFA in the prepared PMCs. Fourier transform infrared spectra revealed the structural changes that occurred in the polymer network for all the samples during the addition of LFA. Results of the X-ray diffraction studies confirmed the crystalline phase of the added LFA in the PMCs. Contact angle and surface energy studies showed a higher contact angle and lower surface energy in the PMC sample containing 5 wt.% LFA. The low wear depth in the sample containing 5 wt.% LFA confirmed its better wear than other samples. The obtained results confirmed that the flax fiber-added polypropylene composite with 5 wt.% LFA is suitable for aerospace, construction, and automobile applications.