Reduced water activity in aqueous electrolytes affects oxygen evolution kinetics, expanding electrochemical stability via increased overpotential, but with conductivity and viscosity trade-offs in high-voltage aqueous electrolytes.
We report the electrodeposition of polymer electrolyte (PMMA-PEG) in porous lithium nickel manganese oxide (LiNi0.5Mn1.5O4) cathode layer by cyclic voltammetry. The cathode-electrolyte interface of the polymer-coated LNMO electrode has been characterized by scanning electron microscopy and electrochemical techniques. Electrochemical measurements consisting of galvanostatic cycling tests and electrochemical impedance spectroscopy revealed a significant improvement of the capacity values and the increase of the operating voltage. These effects are attributed to the total filling of pores by the electrodeposited polymer that contributes to improve the reversible insertion of Li+. A complete all-solid-state microbattery consisting of electropolymerized LNMO as the cathode, a thin polymer layer as the electrolyte, and TiO2 nanotubes as the anode has been successfully fabricated and tested.
The disposal of LiFePO4 (LFP) cathode material through oxidation in an air atmosphere is explained by its high chemical activity and high surface area (especially for nanoparticles). In this article, new methods for the determination of the degree of iron oxidation in LFP (oxidation degree) are taken into consideration, specifically those which do not require complicated hardware support. The proposed methods are based on electrochemical oxidation (coulometric method) and chemical oxidation (chemical oxidation in alkaline and acidic solutions). As an arbitration method for analyzing the iron state, the method of Mössbauer spectroscopy (being the most proven and reliable method) was chosen. With respect to the proposed methods for determination of the oxidation degree, the most reliable and quick approach is the titrimetric method (oxidation in an acidic medium), which is in good correlation with Mossbauer spectroscopy. The coulometric method is also able to determine the material oxidation degree (with some approximation), but it requires a number of conditions in order to eliminate errors.
A formation of protective composite coatings based on nickel and organic substance of inert nature, containing a corrosion inhibitor, encapsulated in a polymer shell, was studied. The microcapsules weresynthesized in an aqueous-organic emulsion using the method of formation of shell of the modified gelatineon the surface of microdroplets. Composite coatings were obtained by electrochemical codeposition of nickelmatrix and microcapsules, suspended in the electrolyte. Changes of surface morphology, microhardnessand corrosive properties of coatings with respect to changes of deposition parameters of coatings wereinvestigated. The distribution of particle sizes in coatings depending on the current density was studied. It was shown that an increase in the mass fraction of the microcapsules in the coating leads to an increase in its corrosion resistance.