CAROLINA MONTOYA VALLEJO

Dr. CAROLINA MONTOYA VALLEJO

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 May 2023 in Frontiers in Bioengineering and Biotechnology
Verified
Journal Article
Open access
CVCAROLINA MONTOYA VALLEJO
CAROLINA MONTOYA VALLEJO
FDFernando León Guzmán Duque
Fernando León Guzmán Duque
JDJuan Carlos Quintero Díaz
Juan Carlos Quintero Díaz
Introduction: Microalgae are photosynthetic cells that can produce third-generation biofuels and other commercial compounds. Microalgal growth is influenced by two main parameters: light intensity and carbon dioxide concentration, which represent the energy and carbon source, respectively. For photosynthesis, the optimum values of abiotic factors vary among species.Methods: In this study, the microalga Chlorella sorokiniana was isolated from a freshwater lake. It was identified using molecular analysis of the ribosomal internal transcribed spacer. A single-factor design of experiments in 250-mL Erlenmeyer flasks was used to evaluate which concentrations of nitrogen and phosphorus increase the production of biomass and lipids. The response surface methodology was used with a 32-factorial design (light intensity and CO2 were used to evaluate its effect on biomass, lipid production, and specific growth rates, in 200-mL tubular photobioreactors (PBRs)).Results and Discussion: Low levels of light lead to lipid accumulation, while higher levels of light lead to the synthesis of cell biomass. The highest biomass and lipid production were 0.705 ± 0.04 g/L and 55.1% ± 4.1%, respectively. A mathematical model was proposed in order to describe the main phenomena occurring in the culture, such as oxygen and CO2 mass transfer and the effect of light and nutrients on the growth of microalgae. The main novelties of this work were molecular identification of the strain, optimization of culture conditions for the indigenous microalgae species that were isolated, and formulation of a model that describes the behavior of the culture.

18 March 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
CVCAROLINA MONTOYA VALLEJO
CAROLINA MONTOYA VALLEJO
JQJuan Carlos Quintero-Díaz
Juan Carlos Quintero-Díaz
YLYamid Andrés Yepes Londoño
Yamid Andrés Yepes Londoño
Francisco Jesus Fernandez-MoralesFrancisco Jesus Fernandez-Morales
Francisco Jesus Fernandez-Morales
Microbial Fuel Cells (MFCs) are an emerging technology enabling electricity generation from the oxidation of biodegradable substrates by exoelectrogenic microorganisms. The use of microalgae in Microbial Fuel Cells (mMFCs) presents significant advantages such as their simultaneous contribution to the reduction in operational energy, CO2 capture, value-added compound production, and the endogenous supply of organic matter—through the decay biomass—to generate electrical current with coupled wastewater treatment. To achieve the desired electrical and wastewater performance, it is crucial to optimize the architecture, electrode and membrane characteristics, and operational conditions such as light intensity, CO2 and nutrient availability, pH, and algae strains used in the mMFCs. This optimization can be aided by mathematical models, with the goal of achieving efficient large-scale operation. This review provides a comprehensive overview of the advances in Microbial Fuel Cells with microalgae, highlighting their electron transfer mechanisms, evaluating strategies to enhance their efficiency and their potential applications.

28 May 2019 in Revista Facultad de Ingeniería Universidad de Antioquia
Verified
Journal Article
Open access
PDF file
DGDaniela Duque Granda
Daniela Duque Granda
CVCAROLINA MONTOYA VALLEJO
CAROLINA MONTOYA VALLEJO
LBLiliana Rocío Botero-Botero
Liliana Rocío Botero-Botero
In order to assess tolerance to cadmium (Cd) for three Colombian native strains of microalgae belonging to the genus Ankistrodesmus, Chlorella and Scenedesmus the growth kinetics, the concentration of pigments, the total dry weight in media contaminated with cadmium in ranges between 0.0 - 15.0 mg L-1 , and the median lethal concentration (LC50) were determined. Additionally, for the more tolerant strains, Scenedesmus sp. and Chlorella sp., removal of Cd in media enriched with 1.0 and 7.0 mg L-1 contaminant was quantified. The study found that Scenedesmus sp was the strain that had the highest tolerance to cadmium generating 36.15 µg mL-1 of dry biomass at 3.5 mg L-1 of Cd and LC50 20.89 mg L-1 Cd after 12 days of culture. The highest percentage of removal of cadmium was 32% for Scenedesmus sp. Chlorella sp. presented good removal of Cd in cultures with low levels of metal and Ankistrodesmus sp. was the microalgae with less tolerance.

4 December 2023 in Energies
Verified
Journal Article
Open access
PDF file
CVCAROLINA MONTOYA VALLEJO
CAROLINA MONTOYA VALLEJO
JPJorge Omar Gil Posada
Jorge Omar Gil Posada
JQJuan Carlos Quintero-Díaz
Juan Carlos Quintero-Díaz
Microbial fuel cells could be used as an alternative for wastewater treatment and electricity generation. Escherichia coli is a representative bacterium that has been widely studied as a model in laboratory assays despite its limited ability to transfer electrons. Although previous studies have employed glucose and methylene blue in electricity production using E. coli, there remains a lack of understanding on how current generation would impact the production of metabolites and what the most appropriate conditions for current production might be. To shed light on those issues, this manuscript used a 32 factorial design to evaluate the effect of the concentration of organic matter (glucose) and the concentration of the mediator methylene blue (MB) using E. coli DH5α as an anodic microorganism. It was found that as the concentration of glucose was increased, the production of electricity increased and at the same time, its degradation percentage decreased. Similarly, a 17-fold increase in current production was observed with an elevation in methylene blue concentration from 0 to 0.3 mM, though inhibition became apparent at higher concentrations. The maximum power generated by the cell was 204.5 µW m−2, achieving a current density of 1.434 mA m−2 at concentrations of 5 g L−1 of glucose and 0.3 mM of MB. Reductions in the production of ethanol, lactate, and acetate were observed due to the deviation of electrons to the anode.

29 November 2023 in Molecules
Verified
Journal Article
Open access
PDF file
CVCAROLINA MONTOYA VALLEJO
CAROLINA MONTOYA VALLEJO
JPJorge Omar Gil Posada
Jorge Omar Gil Posada
JQJuan Carlos Quintero-Díaz
Juan Carlos Quintero-Díaz
Microbial fuel cells are bio-electrochemical devices that enable the conversion of chemical energy into bioelectricity. In this manuscript, the use of biosurfactants (Tween 80 and surfactin) and the effect of coculturing E. coli and L. plantarum were used to investigate the generation of bioelectricity coming from an H-type microbial fuel cell. In this setup, E. coli acts as an electron donor while L. plantarum acts as an in situ biosurfactant producer. It was observed that the use of exogenous surfactants enhanced electricity production compared to conventional E. coli cultures. The utilization of Tween 80 and surfactin increased the power generation from 204 µW m−2 to 506 µW m−2 and 577 µW m−2, respectively. Furthermore, co-culturing E. coli and L. plantarum also resulted in a higher power output compared to pure cultures (132.8% more when compared to using E. coli alone and 68.1% more when compared to using L. plantarum alone). Due to the presence of surfactants, the internal resistance of the cell was reduced. The experimental evidence collected here clearly indicates that the production of endogenous surfactants, as well as the addition of exogenous surfactants, will enhance MFC electricity production.

27 July 2021 in Revista ION
Verified
Journal Article
Open access
PDF file
CVCAROLINA MONTOYA VALLEJO
CAROLINA MONTOYA VALLEJO
ACAlejandro Acosta Cárdenas
Alejandro Acosta Cárdenas
Las microalgas juegan un rol muy importante en la cadena alimenticia de la acuicultura, ya que estas son utilizadas en la nutrición y cría de moluscos, camarones y peces en sus diferentes etapas de crecimiento. Tetraselmis sp, es una microalga reconocida por sus aplicaciones como alimento vivo en acuicultura y sus parámetros de crecimiento pueden variar de acuerdo a las condiciones de cultivo. En este sentido fueron evaluadas diferentes condiciones de crecimiento como medio de cultivo empleado fertilizante comercial, fotoperiodo (12:12 y 24:0) y salinidad (0-55 g l-1) para obtener diferentes parámetros cinéticos de crecimiento. Las mejores condiciones de cultivo se alcanzaron con un fertilizante comercial, un fotoperiodo 12:12, salinidad del 35 g l-1, una velocidad especifica de crecimiento de 1,071 d-1, tiempo de duplicación de 0,64 días, rendimientos (Yx/s) de biomasa respecto al consumo de nitrato, fosforo y amonio de 4,3; 37,7; 10,5 (g g-1) respectivamente, con un contenido de proteínas del 55% (p/p). Adicionalmente, se evaluó el modelo de Gompertz para la producción de biomasa presentando un buen ajuste (r2=0,9) entre el modelo y los resultados experimentales.