Traffic merging in urban environments is one of the main causes of traffic congestion. From the driver's point of view, the difficulty arises along the on-ramp where the merging vehicle's driver has to discern whether he should accelerate or decelerate to enter the main road. In parallel, the drivers of the vehicles already on the major road may have to modify their speeds to permit the entrance of the merging vehicle, thus affecting the traffic flow. This paper presents an approach to merging from a minor to a major road in congested traffic situations. An automated merging system that was developed with two principal goals, i.e., to permit the merging vehicle to sufficiently fluidly enter the major road to avoid congestion on the minor road and to modify the speed of the vehicles already on the main road to minimize the effect on that already congested main road, is described. A fuzzy controller is developed to act on the vehicles' longitudinal control - throttle and brake pedals - following the references set by a decision algorithm. Data from other vehicles are acquired using wireless vehicle-to-infrastructure (V2I) communication. A system installed in the infrastructure that is capable of assessing road traffic conditions in real time is responsible for transmitting the data of the vehicles in the surrounding area. Three production vehicles were used in the experimental phase to validate the proposed system at the facilities of the Centro de Automática y Robótica with encouraging results.

Vehicles equipped with intelligent systems designed to prevent accidents, such as collision warning systems (CWSs) or lane-keeping assistance (LKA), are now on the market. The next step in reducing road accidents is to coordinate such vehicles in advance not only to avoid collisions but to improve traffic flow as well. To this end, vehicle-to-infrastructure (V2I) communications are essential to properly manage traffic situations. This paper describes the AUTOPIA approach toward an intelligent traffic management system based on V2I communications. A fuzzy-based control algorithm that takes into account each vehicle's safe and comfortable distance and speed adjustment for collision avoidance and better traffic flow has been developed. The proposed solution was validated by an IEEE-802.11p-based communications study. The entire system showed good performance in testing in real-world scenarios, first by computer simulation and then with real vehicles.

This paper presents a feedback steering control strategy for a vehicle in an automatic driving context. Two main contributions in terms of control are highlighted. On the one hand, the automatic reference trajectories generation from geometric path constraints (obstacles). Thanks to the flatness property of the considered model, the longitudinal velocity will be controlled around a quasi-constant value while lateral and yaw dynamics targets will allow to avoid obstacles. On the other hand, a sensitivity-based methodology will be presented to choose the best possible gains parameterization in a state Riccati dependent equation (SDRE) feedback controller. Both direct and adjoint sensitivity methods are used, together with a dynamic inversion of the system, in order to optimize the performances of the controller. Obstacle avoiding simulation results will be validated and compared with other nonlinear optimal feedback controllers, from a realistic industrial simulator environment for vehicle dynamics

There is clear evidence that investment in intelligent transportation system technologies brings major social and economic benefits. Technological advances in the area of automatic systems in particular are becoming vital for the reduction of road deaths. We here describe our approach to automation of one the riskiest autonomous manoeuvres involving vehicles - overtaking. The approach is based on a stereo vision system responsible for detecting any preceding vehicle and triggering the autonomous overtaking manoeuvre. To this end, a fuzzy-logic based controller was developed to emulate how humans overtake. Its input is information from the vision system and from a positioning-based system consisting of a differential global positioning system (DGPS) and an inertial measurement unit (IMU). Its output is the generation of action on the vehicle's actuators, i.e., the steering wheel and throttle and brake pedals. The system has been incorporated into a commercial Citroen car and tested on the private driving circuit at the facilities of our research center, CAR, with different preceding vehicles - a motorbike, car, and truck - with encouraging results.