The purpose of this paper is to summarize important aspects related to the study of the mathematical model of internal flow and the nominal performance main parameters of the conical swirl atomizer similar to that used in the JT8 Pratt & Whitney engine. The mathematical proposed model is composed of the inviscid fluid theory of Abramovich and incompressible friction theory of Kliachko, applied to the complexity of the geometry of the inlet channels, such as the irregular cross-section area and nontangential nature with respect to the swirl chamber (geometric characteristics of the conical swirl atomizer). Computational fluid dynamics (CFD) provides additional information on internal flow characteristics of swirl atomizers, the main difficulty of which is the precise control of liquid/air. It was found that by using the volume of fluid (VoF) method and k-epsilon turbulence model (implemented in software Fluent 6.3.26), an understanding of physical phenomena can be obtained as well as better visualization of the air core and hollow-cone spray angle of the atomizer, where the computational domain is composed for three-dimensional structured grids. Experimental data and numerical simulation were used for validation of this mathematical model. These results provide elementary and worthwhile information for the practical design of swirl atomizers, in addition to cost reduction before the combustion testing phase.
1 May 2019 in International Communications in Heat and Mass Transfer
Solar energy found abundantly in nature is considered a renewable energy source. It is also of great interest as an option for energy generation and CO2 emissions reduction. Several technologies of solar concentrating systems, known internationally as CSP (concentrated solar power), are found in the industrial and scientific environment. One of the most mature and internationally known technologies is the parabolic trough solar collector (PTSC), which has several applications, such as electricity generation, desalination, steam generation, and refrigeration systems, among others. However, more research and development (R&D) has been done to improve its performance, using new materials, absorber tube geometries, solar tracking systems, and work (thermal oils, nanofluids). Thus, the present work describes the development of a low-cost PTSC for academic and research purposes. The PTSC was built with an edge angle of 120°, an opening area of 2.2 m2, and a copper absorber tube of 42 mm in outer diameter without a glass envelope. The gutter structure is composed of wooden sheets cut in a parabolic shape, where a 1.2 mm-thick galvanized steel sheet coated with a reflective film is supported, thus functioning as the reflective surface of the PTSC. The solar tracking system is one of the active types with two axes containing photoresistive sensors, which are used to determine the solar position and electric actuators to correct the positioning of the gutter. The monitoring system was developed through an interactive panel to visualize the operating parameters of the sensing elements, thermocouples that measure the inlet and outlet temperature in the absorber tube, and the flow sensor to measure the flow of the heat transport fluid. Laboratory tests were performed with deionized water as a transport fluid, establishing two testing conditions. The first test condition analyzed the efficiency of the collector at different temperatures. Thus, the inlet temperature varied, between 30 and 70°C, presenting a flow of 0.020 kg/s. The second one evaluated the collector efficiency for different flows, subjecting the collector to flows from 0.002 to 0.030 kg/s. Thus, the proposed collector obtained an efficiency as a function of the temperature represented by the expression η = 0.324–2.47443 , where is a parameter that relates the inlet temperature to the ambient temperature as a function of the solar radiation available. Yet, the efficiency in function of the flow became optimal when the flow regime became turbulent. It was concluded that the proposed solar collector obtained lower efficiency when compared with other collectors in the literature, which was assumed to be due to the diffusion losses of the parabolic trough reflector and thermal losses by convection in the parabolic trough absorber tube (optical efficiency, removal factor, and heat loss coefficient).
The present work shows the development of a comprehensive theoretical formulation for its application in the study of the internal flow of pressure-swirl atomizers with helical channels: “screw-conveyer”, which are characterized by presenting in their inlet channels, an angle of incidence or helix angle . This angle originates a trigonometric factor () that must be considered in the geometrical characteristics parameter of pressure-swirl atomizer (), which consequently involves other geometric parameters, such as the annular section coefficient (), discharge coefficient (), spray angle (), etc., being relevant in the internal flow study and design of the pressure-swirl atomizers type screw-conveyer. This theoretical formulation integrates an internal ideal flow model (Abramovich theory) with a model that considers the influence of the liquid viscosity (Kliachko theory) and hydraulic resistance of Idelchik. For the validation of this theoretical formulation, numerical simulation was used, considering the commercial software Ansys Fluent 2023 R2 furthermore, hexahedral meshes were generated with the ICEM CFD software 2023, for four cases of helix angle (, , and ), with application of the RNG k- turbulence model and VOF multiphase model (volume of fluid) for the location of the liquid-gas interface and spray angle visualization.