The application of blasting in modern engineering construction is prized for its speed, efficiency, and cost-effectiveness. However, the resultant vibrations can have significant adverse effects on surrounding buildings and residents. The challenge of optimizing blasting procedures to satisfy excavation needs while minimizing vibration impacts is a critical concern in blasting excavation. This research addresses this challenge through the development of a 3D simulation and analysis model for an underground pumped storage power plant in East China, utilizing the LS-DYNA finite element analysis software. To explore the influence of charging structures on rock fragmentation and vibration propagation, three distinct blasting programs were formulated, each featuring varied configurations within the machinery room. The analysis revealed that the adoption of an optimized charging structure can significantly decrease damage to the protective layer by approximately 40%, while also reducing the impact on the upstream and downstream side walls by 27.25% and 12.03%, respectively, without compromising the efficacy of the main blast zone. Moreover, the vibration velocities at the remote measurement point were found to be reduced across multiple directions, indicating effective control of the vibration effects. The post-implementation of the optimized blasting strategy at the site, the assessment of the retained surrounding rock integrity, and the impact on protected structures demonstrated that the proposed solution met satisfactory outcomes. This study underscores the potential of simulation-based optimization in managing vibration risks during blasting operations, offering a valuable tool for engineers and practitioners in the field of underground construction.
1 January 2023 in The International Conference on Computational & Experimental Engineering and Sciences
Concrete structures such as offshore platforms, costal and port structures, dams, etc., are often submerged in water [1]. The water within concreter pores or cracks has a great influence on crack propagation behavior [2,3]. Several wedge-splitting experiments of compact specimens are conducted with a designed sealing device to study the water effects on concrete crack propagation. Different water pressures and different loading rates are considered loading on the pre-crack surfaces and waterproof strain gauges are stuck along the crack path to observe the fracture process during the experiments. Water pressure values on crack surfaces are recorded by diffused silicon water pressure sensors via the precast holes. The results show that the water pressure on crack surfaces accelerates the crack propagation of the concrete. The critical value of the splitting force decreases in a shape of exponential curve with the increase in the external applied water pressure. The hydraulic crack propagation speed increases at the beginning and tends to reach a peak value finally. Under larger loading rate, the water fails to fill the crack and only the trapped water interacts with the crack surface. The water pressure is mainly a parabolic curve distribution along the crack path and the peak value decreases with the increases in the crack length. The effect of the water fracture interactions in concrete is severe in fast loading conditions rather than in quasi-static conditions during crack sudden opening.
1 January 2025 in Computer Modeling in Engineering & Sciences
Structural internal flaws often weaken the performance and integral stability, while traditional nondestructive testing or inversion methods face challenges of high cost and low efficiency in quantitative flaw identification. To quickly identify internal flaws within structures, a deep learning model for flaw detection is proposed based on the image quadtree scaled boundary finite element method (SBFEM) combined with a deep neural network (DNN). The training dataset is generated from the numerical simulations using the balanced quadtree algorithm and SBFEM, where the structural domain is discretized based on recursive decomposition principles and mesh refinement is automatically performed in the flaw boundary regions. The model contains only six types of elements and hanging nodes don’t affect the solution accuracy, resulting in a high degree of automation and significantly reducing the cost of the training dataset. The deep artificial neural network for flaw detection is constructed using DNN as the learning framework, effectively mitigating the risk of the objective function converging to local optima during training. Statistical methods are employed to evaluate the accuracy of the inversion model, and the influences of flaw size and the number of training samples on the performance are examined. In statistical results of single flaw, the 95% confidence intervals of the relative error for (x, y, r) are [2.16%, 2.76%], [1.53%, 1.96%] and [1.49%, 1.91%], respectively. The 95% confidence interval of the comprehensive relative error for double flaws is [3.06%, 3.62%]. The results demonstrate that the predicted flaw parameters align closely with the reserved clean data, indicating that the model can accurately quantify both the location and size of structural flaws.