Biomass is considered as a promising source to fabricate functional carbon materials for its sustainability, low cost, and high carbon content. Biomass‐derived‐carbon materials (BCMs) have been a thriving research field. Novel structures, diverse synthesis methods, and versatile applications of BCMs have been reported. However, there has been no recent review of the numerous studies of different aspects of BCMs‐related research. Therefore, this paper presents a comprehensive review that summarizes the progress of BCMs related research. Herein, typical types of biomass used to prepare BCMs are introduced. Variable structures of BCMs are summarized as the performance and properties of BCMs are closely related to their structures. Representative synthesis strategies, including both their merits and drawbacks are reviewed comprehensively. Moreover, the influence of synthetic conditions on the structure of as‐prepared carbon products is discussed, providing important information for the rational design of the fabrication process of BCMs. Recent progress in versatile applications of BCMs based on their morphologies and physicochemical properties is reported. Finally, the remaining challenges of BCMs, are highlighted. Overall, this review provides a valuable overview of current knowledge and recent progress of BCMs, and it outlines directions for future research development of BCMs.

For perovskite solar cells (Pero-SCs), one of the key issues with respect to the power conversion efficiency (PCE) is the morphology control of the perovskite thin-films. In this study, an easily-accessible additive polyethylenimine (PEI) is utilized to tune the morphology of CH₃NH₃PbI_3−xCl_x. With addition of 1.00 wt% of PEI, the smoothness and crystallinity of the perovskite were greatly improved, which were characterized by scanning electron microscopy (SEM) and X-ray diffraction (XRD). A summit PCE of 14.07% was achieved for the p-i-n type Pero-SC, indicating a 26% increase compared to those of the devices without the additive. Both photoluminescence (PL) and alternating current impedance spectroscopy (ACIS) analyses confirm the efficiency results after the addition of PEI. This study provides a low-cost polymer additive candidate for tuning the morphology of perovskite thin-films, and might be a new clue for the mass production of Pero-SCs.