Irreversible curing distortion represents a significant limiting factor in the application of high-performance composite structures. Curing distortion is the deviation of a component’s profile from the theoretical profile after demolding. Introducing the optimal compensation profile into the traditional compensation algorithm represents an effective method to enhance CFRPs’ forming accuracy. For this method, it is necessary to obtain the optimal compensating profile by establishing the coordinate model of the curing process parameter and mold profile compensation. The coordinated control model consists of four parameters: the mean value (Dav), root mean square value (Dmsr), minimum (Dmin), and maximum (Dmax) of curing distortion. Two sizes of composite structural parts are manufactured using the global compensation method. We investigate the influence mechanisms of heating, holding, and cooling times on curing distortion and residual stresses and develop a multi-field coupled finite element model. Strong agreement between the numerical and experimental findings serves as evidence for the effectiveness of the numerical model. The middle layer of the fabricated parts exhibit a reduction in residual stresses as the heating and holding times increase, while an opposite trend is noted with an increase in cooling time. Refining the design of curing process parameters can yield the minimum value of curing deformation within the specified resin system interval. Comparisons indicate that the distortion of the composite wall panel structure is reduced by 86.2% through the use of the global compensation method, demonstrating the validity of this approach for composite structures.
16 July 2024 in IEEE Transactions on Instrumentation and Measurement
To ensure the quality of aircraft assembly, precise 3-D inspection of countersinks in the aircraft skin is crucial. We propose CPE-Net, a multi-task countersink primitive extraction network designed for this purpose. CPE-Net employs a 3-D point cloud deep learning network to predict countersink edge points, which are then clustered into paired large and small circles, effectively segmenting each countersink into two circular structures. To overcome the influence of measurement noise and sampling irregularity, we employ a learning-based weighted least squares method to adaptively fit circle parameters. Unlike conventional methods, CPE-Net co-trains the classification, clustering, and fitting modules using a comprehensive loss function that incorporates edge detection error, clustering error, and circle fitting error. This holistic training approach enhances the quality of the extracted countersinks. The extracted countersink primitive parameters are utilized for geometry calculations, resulting in 3-D quality metric values. Our method undergoes testing on both virtual point cloud data and raw-scan data. Experimental results demonstrate the superior accuracy of our approach compared to existing extraction methods. Furthermore, through a comparative analysis with detection results from contact measurement methods on practical test workpieces, our countersink extraction method showcases its capability and practicality to achieve precise quality inspection.
Aerogels, characterized by their low density and high porosity, possess excellent thermal insulation properties. It is worth exploring whether the materials obtained by combining aerogels and carbon fibers can achieve a better thermal insulation effect for the application of liquid hydrogen storage tanks. The focus of this thesis consists of selecting the vacuum bagging method for the combination of composite laminates and aerogel blankets and evaluating the mechanical properties of the obtained specimens through T-peel experiments and microscopy observations. The aerogel-bond specimen has an average adhesive fracture toughness of 230 J/m2, in contrast to the polymer-bond specimen’s 660 J/m2. Consequently, the mechanical properties of the polymer-bond specimens surpass those of the aerogel-bond specimens. In this work, thermal conductivity is used to characterize the thermal insulation properties of the materials. The thermal conductivity of the composite specimens is measured by the heat flux meter method and their thermal insulation properties are evaluated. According to the results, the integration of M78.1 and Cryogel-Z has a thermal conductivity of 0.0262 W/m·k, at 50 °C. And its thermal conductivity in a 75 °C environment is 0.0278 W/m·k. This suggests that it also has excellent thermal insulation properties. Additionally, the simulation results are in agreement with the experimental results.