This paper mainly discusses the derivation and usage of simplified analysis model of circular concrete-filled steel tube specimen under lateral impact. At first, the robust software, LS-DYNA, is employed in this paper to simulate a test of circular concrete-filled steel tube (CFT) specimen under drop impact carried out by Li (2007). The numerical simulations results agree well with the experiment results and it shows good prediction of dynamic response of the CFT specimen under lateral impact could be achieved. Further analysis based on LS-DYNA model is then made to investigate the stain rate effect of the CFT column with fixed-simple supported ends. At last, a simplified analytic model is derived based on the combination of the tests results, the numerical simulation and theoretical analysis. The comparison between the maximum deflections at the mid-span obtained from the proposed simple analytical model and the numerical simulation shows that the proposed method gives good predictions of the maximum deflection of the CFT specimen under lateral impact.
1 March 2021 in International Journal of Impact Engineering
This paper investigates isodamage criteria for framed PVB (polyvinyl butyral) laminated glass panels subjected to blast load. Isodamage criteria are presented in the form of pressure-impulse (P-I) diagrams, and a methodology for the generation of the P-I diagrams for laminated glass was developed based on numerical simulation studies and the energy method. Three damage levels were classified in accordance with the conditions identified in standards, namely (1) the glass crack limit, (2) the PVB rupture limit, and (3) overall detachment with a specific velocity after the PVB ruptures. Based on nonlinear finite-element analysis, the governing failure modes of the glass panel in both impulsive and quasi-static regions for each damage level were identified and the corresponding deflection functions were determined. A simplified PVB tensile bar model is proposed to describe the local tensile failure of PVB laminated glass corresponding to Damage Level III under impulsive loading. The pressure and impulse asymptotes of framed PVB-laminated glass for different damage levels were derived using the energy balance principle. The proposed method was validated through comparison with published experimental data and further numerical results. This method can provide a reference for engineering design and hazard estimation of framed PVB-laminated glass against blast loading and can be extended to laminated glazing with other interlayers.