There are significant advantages to investigate underwater attachments, which would be valuable in providing inspirations and design strategies for multi-functional surfaces and underwater robots. Here, an abalone-inspired sucker integrating an elastic body and a membrane structure is proposed and fabricated filled with rigid quartz particles to adjust the backing stiffness of the contact like abalone. The membrane is used to conform and contact surfaces well, the center area of which can be pulled in exposed to a negative pressure differential, to create a suction cavity. The pulling experiments indicate that the sucker can adhere to three-dimensional surfaces with both suction and adhesion mechanisms in both dry and liquid environments. The switching between soft/hard contact states leads to the change of adhesive strength over 30 times. Furthermore, we provide theoretical analysis on how the sucker work well in both dry and liquid environments. Finally, the developed sucker can easily lift up smooth planar objects and 3D objects, and can grip objects both smaller and larger than the size of the sucker, which have a difficulty for conventional suckers or friction-based grippers. The potential application of the sucker in flexible transfer robot is demonstrated on various surfaces and environments, paving the way for further bio-inspired adhesive designs for both dry and wet scenarios.
Tactile sensors act a crucial part in the field of artificial intelligence systems and the field of flexible electronics. Recently, conventional tactile sensors with pressure monitoring have been well developed, while the responsive mechanisms of the magnetic flexible materials for the tactile sensors remain unclear. Here, we introduce a magnetic tactile sensor (MTS) using the configuration of a giant magnetoresistance (GMR) sensor, a flexible magnetic film, and four connected columns that can be capable of detecting both shear force and normal pressure. The millimeter lever columns as the connection layer enable to deform under pressure and shear forces reliably and continuously. Combined magnetic with mechanical perspectives, two theoretical models are proposed to explain the deformation mechanisms of the connection layer under a magnetic field, which establish a correlation among mechanical deformation, the relative reluctance change, and shear force/pressure. The tactile sensor shows shear perception with a sensitivity of 0.2 N1 (0–0.05 N) and pressure monitoring with a sensitivity of 0.0087 kPa1 (0–5 kPa). Furthermore, the experiments testify to the application potential of the MTS in various fields such as manipulator and human posture detection.
10 December 2020 in Applied Bionics and Biomechanics
In this study, we aim to probe the self-righting behavior of abalone on a substrate based on experiments and mechanistic analyses. A successful self-righting process of abalone is observed, and its critical condition in theory can be given in terms of the rotation angle. Then, according to the moment balance and potential energy minimization, the required tension force of the abalone foot for self-righting is derived with respect to the rotation angle. The experimental result also shows that in many cases the abalone cannot finish this self-righting process. Then, measurements on the tolerant strength of abalone muscle and tolerant adhesion strength of the foot on substrate are both conducted. It is judged that the abalone muscle is strong enough, which can provide enough tension force, and thus, the self-righting mainly depends on the adhesion area of the foot on substrate. These findings cast new light on engineering new types of biomaterials and devices, such as marine equipment and soft robotics.
1 December 2021 in Journal of the Mechanical Behavior of Biomedical Materials
The smart manipulation of droplets has received widespread attention due to its potential applications in many fields. However, it is still challenging to realize robust multidimensional, versatile liquid manipulation using magnetically responsive surfaces. Here, a magnetically controlled surface with a dense array of cone-shaped microstructures is developed by the spray self-assembly method using soft nontoxic materials. The effects of the spray volume and material concentrations on the surface morphology and wettability are systematically investigated. The wettability and adhesion properties of the developed surface can be reversibly switched in the presence of an on/off magnetic field. In situ observation indicated that the driving force acted on the droplet is derived from localized deformation of the microstructures. Moreover, theoretical models of droplet manipulation are proposed to demonstrate the underlying mechanism. Under the actuation of the moving magnetic field, the surface can transport droplets of 1–14 μl in the vertical direction, and the modified superhydrophobic surface can transport droplets of 3–30 μl in the horizontal direction and achieve against-gravity droplet climbing with a volume of 10 μl at a climbing angle of 25°. The environmentally friendly and facilely manufacturable surface presents promising applications in liquid microreactors and the transportation of mixed fluids in biological and chemical research.